I have an eMac (G4, 700mhz, 768mb ram......yes I know it's old and decrepit...but so am I )) and when playing music using iTunes 9.0, my machine crashes with a "kernel panic." I'm only playing songs stored on the hard drive.
View 2 Repliesmy used eMac 1.42 ghz with 2gb ram, tiger 10.4.11 began to freeze a few months ago so I cleared the hard drive and reinstalled = worked ok for a while. Now, it is regularly freezing and even locking up when it has been running for a while - when it heats up. Until it cools off a while, on restart or after shutdown, it will hang at the grey screen or display a flashing folder with an alternating finder icon and a question mark - I assume it can't find the OS. After rebooting, I got the report function with this info
View 1 Replies View RelatedI have an EMac 800mhz and I tried to install tiger on it but it said something like "kernel panic, we are hanging here."
Info:
eMac, Mac OS X (10.3.x), 800 Mhz Powerpc 640 MB ram 60 gb HD
I bought an iBook G4 a few months ago, with the airport not working, causing kps, but i could still boot up. The repair to this was to open it up, and sandwich a thick piece of paper on the airport card inside the ibook. This solved my airport problem and i could use the internet without any problems. Then one day, I turned on my iBook, and it gave me a bright 'You need to restart your computer'. message with 4 different languages. I restarted it hundreds of times, constantly giving me this kp. Then i formatted my harddrive, re-installed leopard (10.5.6) via target disk (partitioned it, restored the smaller partition with leopard, then booting off that partition in target disk mode). I then deleted that smaller partition with ipartition, resized the main partition, did 3 Disk Repairs (disk utility) and rebooted the iBook. Still the same kernel panic. CMD-S gave me this error: Code: Wed Dec 31 18:12:10 1969 Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000120 PC=0x000000001761039C Latest crash info for cpu 0: Exception state (sv=0x12de2000) PC=0x1761039C; MSR=0x00009030; DAR=0x00000120; DSISR=0x40000000; LR=0x1761275C; R1=0x16DFBAA0; XCP=0x0000000C (0x300 - Data access)......
View 2 Replies View RelatedI have a BIG problem with my old powerbook. I have decided to format it.
It came with tiger, I had installed leopard with an upgrade DVD (not full version).
What I did: I inserted the leopard upgrade dvd and told the pb to initialize and install. After a while I had an error message. It already deleted everything, so when I insert the leopard dvd, it doesn't find any other OS, therefore I can't install the upgrade.
NO PROBLEM, I have the 2 tiger DVD. I insert the first one, pressing C, no. It does not start.
NO PROBLEM, I connect via firewire the powerbook to a macpro. I open the cd 1 of tiger (in the macpro) go to the installation file, and start the installation via firewire. It tells me that I have to partion the disk in Mac os extended with an option "GUI" (something like that).
I have noticed that the GUI mode is for an intel based mac, but mine is ppc...but if I select any other option the system doesn't allow me to continue with the installation of OSX]
I did it, and the installation proceeded well. After a while It asked me for CD2, I inserted it and finished the installation succesfully.
Now I started my powerbook...and is not working, again Kernel Panic...but now there is the OS installed, so...why?
I'm having problems with my powerbook freezing up and needing to be restarted. It's been concluded that when you apply pressure left of the trackpad it freezes with a kernel panic error.
Does anyone know if this can be fixed without a new logicboard? What causes the kernel panic error? Is it allways a hardware problem??
I have a PowerBook G4, 1.33 GHz, 512MB ram and I am having trouble installing leopard. I have backed up the hard drive and erased it for a clean install. Every time I go to install if freezes at "calculating estimated time remaining" and gives a kernel panic error. I am unable to check the panic log as the hard drive was erased. I have already repaired disk, reset pram etc.
View 2 Replies View RelatedI'm relatively new to Macs and I wanted to try a clean install (or erase and install) on my ibook. I recently purchased a MBP and since Leopard is on the horizon, I wanted to do a "trial run" of installing an updated operating system. I know that you can just hit update instead of doing a clean install, but I've been reading that things run better when you do a fresh install. My old ibook still has Panther on it and I figured I could try to install Tiger on it from my MBP disks.
I know that this represents a violation of the license, but I thought it would be worth it to ensure that I don't make any major mistakes when I'm doing the same procedure with my brand new MBP when Leopard gets released. When I tried booting from the disk from my ibook I got a kernel panic which I interpreted as a sign that it was not a good idea so I abandoned the project. Now every time I try to start my ibook I get another kernel panic and I'm afraid I just broke my old computer.
I already have the iMac up and running and would like to bring my eMac libraries over to the new iMac. Is the easiest way to this is drag and drop files on the iMac from the eMac using firewire? How do I mount the eMac as an external drive? I bought a new ibook in the the past, but never transfered my 25,000+ picture iPhoto or 3,000+ iTunes libraries to it (saved space). Also, I assume all I have to do for the copy protected aac files I have downloaded on the eMac is to add my log in to the iTunes on the iMac?
View 4 Replies View RelatedHow much RAM should I stuff in an eMac G4 (1Ghz I believe) to get acceptable performance as both a low-duty File Server and as an iTunes/iPhoto/iMovie '06 Machine? Im currently having this capacity filled by 2 machines: iTunes/iPhoto by a G4/450 and iMovie HD on my G4/1.67 . I know Ill take a slight performance hit, but if it means my PowerBook can go back to being a laptop, its worth it.
View 2 Replies View RelatedSounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies View RelatedI am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies View RelatedFor the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies View RelatedI get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies View RelatedI recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies View RelatedI'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
I'm new to mac so everything you say try to be as specific as possible.
i bought a used ibook g4 on ebay. i am pretty sure it is running OS X 10.1 if that matters but i'm not sure on that.
After messing around for a while i turn it off and back on a while later and when it was turning on it came to the gray screen and had a folder with a question mark then the little dude with the nice smilie face but an error comes up.
My wife was attempting to load the most recent updates onto her MB, the update failed (not sure exactly which one) and now OSX won't load. She gets a "Version mis-match between Kernel and CPU PM" panic and it won't go any farther - neither in safe mode nor single user mode. I booted off of my computer's recovery disc (I haven't found hers yet - we recently moved) and used Disk Utility to repair the disk and the disk permissions, but it still won't load.
View 6 Replies View Relatedi go the following kernel panic. it would be great if you could me identify why i am gettin these panic.I have the mid 2007 white macbook
View 15 Replies View RelatedI did a quick search through the forum and didn't see anything specific about this problem. It just started to occur yesterday and nothing has changed on the computer. (Nothing new installed and no external hardware plugged in.)
Basically, it just pops up with the grey screen advising to restart. Sometimes it occurs after waking from sleep, sometimes it occurs after starting up, and sometimes it occurs in the middle of a task. I haven't noticed a specific pattern.
I ran the AHT and everything passed. I also ran Rember and the memory seemed fine in the test. I reset the PRAM and VRAM and the SMC after speaking with Apple. Finally, I reinstalled the OSX clean on the machine and the panics are still occurring.
This is the last panic report from the Macbook 1,1 2.0 with 1.25 GB RAM. I'm hoping it is the RAM and not something with the logic board, but am not sure if that can be ascertained without finding replacement RAM first.
Mac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C)
I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
I tried to play world of warcraft so after going through all possible trouble shooting steps such as disc repair, reset pram and everything else I did an archive and reinstalled my OS. At first this seemed to work but then I could not even open safari with out the computer locking up So I erased everything and did a fresh install, the installation had no problems I did a disk check and everything before installing everything was good.Then I get to the welcome animation screen and on the first word the computer locked up at the graphics and the only way to get it off was to hold the power button and restart. Now I am stuck in a kernel panic and can not do anything. The only thing it will allow me to do is get into single user mode, I can not even boot to the CD or disk utility it just keeps giving me the kernel panic when i try and hold shift, c, or d while booting up.
View 1 Replies View RelatedI'm getting this Kernel Panic randomly. What might be causing it?
View 6 Replies View RelatedI get kernel paic upon boot. I did that hard drive cleanup and reinstalled Lion. What about memory? I need to upgrade my memory? I have 8 G of upgraded RAM. (20 inch iMac core 2 duo)
Info:
iMac, Mac OS X (10.7.3)
My computer had problems with display, track pad, not powering up, and lots of parts were replaced in January (MacBook Pro purchased 12.31.09). Got it home, after a while constant kernal panics. tried everything, brought it into Apple store yesterday, ran diagnostics, hard disk repaired, seemed OK.
Shortly after I came home it happened again. I repaired permissions, did verify disk, no problems with disk. Updated software, including went to Java and Adobe and updated them. Nothing works. Now the permissions note lots of problems with Remote Management (one of the updates from yesterday, 5.21) and Java (yesterday too). MacBook Pro OS X 10.6.8, would like to go to Lion but don't want to until my machine is stable?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
