I have a PowerBook G4, 1.33 GHz, 512MB ram and I am having trouble installing leopard. I have backed up the hard drive and erased it for a clean install. Every time I go to install if freezes at "calculating estimated time remaining" and gives a kernel panic error. I am unable to check the panic log as the hard drive was erased. I have already repaired disk, reset pram etc.
View 2 RepliesI'm having problems with my powerbook freezing up and needing to be restarted. It's been concluded that when you apply pressure left of the trackpad it freezes with a kernel panic error.
Does anyone know if this can be fixed without a new logicboard? What causes the kernel panic error? Is it allways a hardware problem??
I am trying to install leopard on a g4 450 dual processor with a gig of kingston ram. I received this computer with the Question mark folder, witch appears after startup. I get the boot menu select the external hard drive from witch the leopard dvd is on. I have inspected and tested this and it works on other macs. After o select it about 15-20 seconds go by then the lovely kernel panic happens.
View 1 Replies View RelatedAfter installing update I am getting a panic debugging in start up
Info:
MacBook Pro, Mac OS X (10.4)
I'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
Unfortunately, I've installed the latest update 10.7.4 from apple. Since I've upgraded I had 8 Kernel panics happening sometimes without even touching the macbook pro.this is the latest kernel panic report : Â Â
Interval Since Last Panic Report:Â 33787 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 2
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â D509E77E-1936-47EB-9C95-EAA0CEC13E11Â Â
[code]....
Info:
MacBook Pro, Mac OS X (10.7.4)
My girlfriend has an imac g5 running panther, she was able to get a copy of tiger also for the g5 from her job. Is it possible to run this operating system on her imac.
When i tried installing i got a kernel panic.
Her imac has a 1.6ghz power pc processor.
756mb ram
60 gigs of space left
I bought a used macpro still on apple warranty quad core 2.93 with 8gb ram from OWC and 4 hardrive 1 by apple factory. One WD caviar black 640gb 32mb cache, 2 HD 320gb which I am using with raid stripped. Morover I have a second DVD LG mounted.
It is happening that at least once a day the system give me a GSOD and when I switchd the machine on again the system give me the following reporting error:
Interval Since Last Panic Report: 188606 sec
Panics Since Last Report: 4
Anonymous UUID: 33612D32-8B49-4153-9D1D-61FF96098884
Sun Oct 11 11:31:50 2009
Machine-check capabilities (cpu 6) 0x0000000000001c09:
family: 6 model: 26 stepping: 5 microcode: 15
Intel(R) Xeon(R) CPU W3540 @ 2.93GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0xfe1615000001009f valid
Channel number: 15
Model: MacPro4,1, BootROM MP41.0081.B03, 4 processors, Quad-Core Intel Xeon, 2.93 GHz, 8 GB, SMC 1.39f5
Graphics: NVIDIA GeForce GT 120, NVIDIA GeForce GT 120, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.19)
Bluetooth: Version 2.2.1f7, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: NVIDIA GeForce GT 120, Display, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH41N
Serial ATA Device: HL-DT-STDVD-RAM GH22NS30
Serial ATA Device: WDC WD3202ABYS-01B7A0, 298,09 GB
Serial ATA Device: WDC WD3202ABYS-01B7A0, 298,09 GB
Serial ATA Device: WDC WD6401AALS-00L3B2, 596,17 GB
Serial ATA Device: WDC WD6400AAKS-41H2B0, 596,17 GB
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd300000
USB Device: Hub, 0x03f0 (Hewlett Packard), 0x2f24, 0xfd100000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd130000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd133000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd132000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000
FireWire Device: built-in_hub, Up to 800 Mb/se
My dad's computer just had a kernel panic and I want to fix it fast. I've already run the basic Apple hardware test and it says no problems found. About last week he added 8GB (2x4GB) modules to his Mac Pro. He's running OSX 10.5.8, when he started it back up, it said OSX has recovered from an error/serious error and sent a report to Apple. The most recent thing he did was change his external backup drive (for TM) to a fresh one - a 1TB Lacie HD. Is there anything I can do to figure out what happened? Is it possible this could be just a once off thing, or maybe it was that mosaic screensaver? When the kernel panic occurred it was on that screensaver.
View 6 Replies View RelatedMy computer has been freezing for a while now, but today I got an error message which said "You need to restart your computer". When I logged in I got an error message which said "Mac OSX quit unexpectadly"
I've had it since 2006 and it's worked fine up until a couple of months ago.
Tue Jun 2 19:26:56 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0105607e, type 0=divide error, registers:
CR0: 0x80010033, CR2: 0x16091000, CR3: 0x01487000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x00000000
CR2: 0x16091000, EBP: 0x216aa988, ESI: 0x1314f000, EDI: 0x1314f000
EFL: 0x00010246, EIP: 0x0105607e, CS: 0x00000008, DS: 0x01f70010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x216aa678 : 0x12b4f3 (0x45b13c 0x216aa6ac 0x1335e4 0x0)
0x216aa6c8 : 0x1a9c68 (0x464700 0x105607e 0x0 0x463de0)
0x216aa7a8 : 0x1a038d (0x216aa7c0 0x0 0x216aa988 0x105607e)
0x216aa7b8 : 0x105607e (0xe 0x48 0x216a0010 0x1f60010)
0x216aa988 : 0x1007d1e (0x1314f000 0x301 0x31b 0x1005e5c)
0x216aaaf8 : 0x1008175 (0x1314f000 0x0 0x0 0x0)
0x216aab28 : 0x43e3d6 (0x1314f000 0x0 0x0 0x4cded88)
0x216aab78 : 0x43f381 (0x1062858 0x1314f000 0x4cded74 0x2)
0x216aabd8 : 0x43cfb4 (0x1314f000 0x9 0x216aac20 0x0)
0x216aacf8 : 0x18e4eb (0x1314f000 0x9 0x4cded74 0x2)
0x216abdb8 : 0x12d506 (0x4cded4c 0x4cf05a0 0x0 0x0)
0x216abdf8 : 0x126609 (0x4cded00 0x0 0x78 0x216abee4)
0x216abf08 : 0x198153 (0x216abf44 0x0 0x0 0x0)
0x216abfc8 : 0x1a0977 (0x38b80a0 0x0 0x1a30b5 0x4367000)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffedfe8
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.3.6)@0xfdb000->0x1072fff
dependency: com.apple.NVDAResman(5.3.6)@0x711000
dependency: com.apple.iokit.IONDRVSupport(1.7.1)@0x703000
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x5c6000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.1)@0x6e6000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: iMac6,1 (Mac-F4218FC8)
i started up my Mac the other day and this
Panic(cpu 0 caller 0x0043913F): �Unable to find driver for this platform : �ACPI�.
�@/Source Cache/xnu/xnu-1228.15.4/iokit/Kernel/IOPlatformExpert.cpp:1407
Debugger called: <panic>
Backtrace (CPU 0), Frame : Return Address ( 4 potential args on stack)
0x41643dd8 : 0x12b4c6 (0x45f91c 0x41643e0c 0x13355c 0x0)
0x41643e28 : 0x43913f (0x4a6228 0x4e47710 0x41643e58 0x4eb4580)
0x41643e48 : 0x417068 (0x4eadd00 0x4eadd80 0x1 0x3f1478)
0x41643ea8 : 0x41890b (0x4eadd80 0x4eadd00 0x4eb4600 0x0)
0x41643f28: 0x41816f (0x4eadd80 0x4eb4680 0x8 0xffffffff)
0x41643f28: 0x419803 (0x4eadd80 0x0 0x1a40b5 0x4ea98b8)
Backtrace terminated-invalid frame pointer 0
BSD process name corresponding to current thread: Unknown
Mac OS version:
Note yet set
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root :xnu-1228.15.4~1/RELEASE_I386
After installing 4GB of RAM on my unibody macbook pro, I get a kernel panic error. Am I right that the problem is about CPU? Is that mean that it is dying or broken?
Here what is said:
Interval Since Last Panic Report: 141459 sec
Panics Since Last Report: 2
Anonymous UUID: F96DF9E1-E94C-4FC7-B934-5DFD765093C4
Thu Nov 4 20:34:54 2010
panic(cpu 1 caller 0x9ca5d7): NVRM[0/2:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0x59938000 0x096380c1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x58d5b938 : 0x21b455 (0x5cf328 0x58d5b96c 0x2238b1 0x0)
0x58d5b988 : 0x9ca5d7 (0xbd6f0c 0xc45f80 0xbe4468 0x0)
0x58d5ba28 : 0xadd179 (0x95b5404 0x95b3004 0x100 0x2)
0x58d5ba78 : 0xad4cae (0x95b3004 0x100 0x58d5bb08 0x2)
0x58d5baa8 : 0x17c181e (0x95b3004 0x100 0x4bcd2cee 0x13b0103)
0x58d5bbe8 : 0xafaf45 (0x95b3004 0x95b1004 0x0 0x0)
0x58d5bc28 : 0x9d3836 (0x95b3004 0x95b1004 0x0 0x0)
0x58d5bc68 : 0x9cfaf5 (0x0 0x9 0x0 0x0)
0x58d5bdc8 : 0x9d1a5d (0x0 0x600d600d 0x702a 0x58d5bdf8)
0x58d5be98 : 0x9685f4 (0xc1d0002e 0xaa910001 0x20802040 0x58d5bee0)
0x58d5bef8 : 0xd132e9 (0x8f4e400 0x58d5bf4c 0x0 0x7)
0x58d5bf58 : 0xd13486 (0x8f43800 0xd19ab4 0x58d5bf78 0x2a1591)
0x58d5bf78 : 0x22fb84 (0x8f43800 0x0 0x0 0x73847d61)
0x58d5bfc8 : 0x29e6cc (0x863ea0 0x0 0x10 0x9a5f0a0)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.12)@0xd10000->0xd19fff
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x937000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x959000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x926000
com.apple.nvidia.nv50hal(6.1.8)@0x1693000->0x1ab4fff
dependency: com.apple.NVDAResman(6.1.8)@0x966000
com.apple.NVDAResman(6.1.8)@0x966000->0xc47fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x926000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x959000
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x937000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 13213256682202
unloaded kexts:
com.apple.driver.AirPortBrcm43224425.16.2 (addr 0xd54000, size 0x1523712) - last unloaded 105226877102
loaded kexts:
com.apple.driver.AppleHWSensor1.9.3d0 - last loaded 24131381015
com.apple.filesystems.ntfs3.2
com.apple.driver.AGPM100.12.12
com.apple.driver.AppleHDA1.8.7f1
com.apple.driver.AppleMikeyHIDDriver1.2.0
com.apple.driver.SMCMotionSensor3.0.0d4
com.apple.driver.AppleMikeyDriver1.8.7f1
com.apple.filesystems.autofs2.1.0
com.apple.driver.AudioAUUC1.4
com.apple.kext.AppleSMCLMU1.5.0d3
com.apple.Dont_Steal_Mac_OS_X7.0.0
com.apple.driver.AudioIPCDriver1.1.2
com.apple.driver.AppleIntelPenrynProfile17
com.apple.driver.ACPI_SMC_PlatformPlugin4.1.2b1
com.apple.driver.AppleLPC1.4.12
com.apple.driver.AppleGraphicsControl2.8.63
com.apple.driver.AppleUpstreamUserClient3.3.2
com.apple.GeForce6.1.8
com.apple.driver.AppleUSBTCButtons1.8.1b1
com.apple.driver.AppleUSBTCKeyboard1.8.1b1
com.apple.driver.AppleIRController303.8
com.apple.iokit.SCSITaskUserClient2.6.5
com.apple.iokit.IOAHCIBlockStorage1.6.2
com.apple.BootCache31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib1.0.0d1
com.apple.driver.AppleSmartBatteryManager160.0.0
com.apple.driver.AppleFWOHCI4.7.1
com.apple.driver.AirPortBrcm43xx423.91.27
com.apple.driver.AppleUSBHub4.0.0
com.apple.driver.AppleAHCIPort2.1.2
com.apple.nvenet2.0.15
com.apple.driver.AppleUSBEHCI4.0.2
com.apple.driver.AppleUSBOHCI3.9.6
com.apple.driver.AppleEFINVRAM1.3.0
com.apple.driver.AppleRTC1.3.1
com.apple.driver.AppleHPET1.5
com.apple.driver.AppleACPIButtons1.3.2
com.apple.driver.AppleSMBIOS1.6
com.apple.driver.AppleACPIEC1.3.2
com.apple.driver.AppleAPIC1.4
com.apple.driver.AppleIntelCPUPowerManagementClient105.10.0
com.apple.security.sandbox0
com.apple.security.quarantine0
com.apple.nke.applicationfirewall2.1.11
com.apple.driver.AppleIntelCPUPowerManagement105.10.0
com.apple.driver.DspFuncLib1.8.7f1
com.apple.driver.AppleProfileReadCounterAction17
com.apple.driver.AppleProfileTimestampAction10
com.apple.driver.AppleProfileThreadInfoAction14
com.apple.driver.AppleProfileRegisterStateAction10
com.apple.driver.AppleProfileKEventAction10
com.apple.driver.AppleProfileCallstackAction20
com.apple.iokit.IOFireWireIP2.0.3
com.apple.iokit.IOSurface74.0
com.apple.iokit.IOBluetoothSerialManager2.3.7f1
com.apple.iokit.IOSerialFamily10.0.3
com.apple.iokit.IOAudioFamily1.7.6fc2
com.apple.kext.OSvKernDSPLib1.3
com.apple.driver.AppleHDAController1.8.7f1
com.apple.iokit.IOHDAFamily1.8.7f1
com.apple.driver.AppleSMBusController1.0.8d0
com.apple.iokit.AppleProfileFamily41
com.apple.driver.AppleSMC3.0.1d2
com.apple.driver.IOPlatformPluginFamily4.1.2b1
com.apple.driver.AppleSMBusPCI1.0.8d0
com.apple.nvidia.nv50hal6.1.8
com.apple.NVDAResman6.1.8
com.apple.iokit.IONDRVSupport2.1
com.apple.iokit.IOGraphicsFamily2.1
com.apple.driver.BroadcomUSBBluetoothHCIController2.3.7f1
com.apple.driver.AppleUSBBluetoothHCIController2.3.7f1
com.apple.iokit.IOBluetoothFamily2.3.7f1
com.apple.driver.AppleUSBMultitouch205.32
com.apple.iokit.IOUSBHIDDriver4.0.2
com.apple.driver.AppleUSBMergeNub4.0.0
com.apple.driver.AppleUSBComposite3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice2.6.5
com.apple.iokit.IOBDStorageFamily1.6
com.apple.iokit.IODVDStorageFamily1.6
com.apple.iokit.IOCDStorageFamily1.6
com.apple.driver.XsanFilter402.1
com.apple.iokit.IOAHCISerialATAPI1.2.4
com.apple.iokit.IOSCSIArchitectureModelFamily2.6.5
com.apple.iokit.IOFireWireFamily4.2.6
com.apple.iokit.IO80211Family311.1
com.apple.iokit.IOUSBUserClient4.0.0
com.apple.iokit.IOAHCIFamily2.0.4
com.apple.iokit.IONetworkingFamily1.9
com.apple.driver.NVSMU2.2.7
com.apple.iokit.IOUSBFamily4.0.2
com.apple.driver.AppleEFIRuntime1.3.0
com.apple.iokit.IOHIDFamily1.6.5
com.apple.iokit.IOSMBusFamily1.1
com.apple.kext.AppleMatch1.0.0d1
com.apple.security.TMSafetyNet6
com.apple.driver.DiskImages283
com.apple.iokit.IOStorageFamily1.6.1
com.apple.driver.AppleACPIPlatform1.3.2
com.apple.iokit.IOPCIFamily2.6
com.apple.iokit.IOACPIFamily1.3.0
Model: MacBookPro5,1, BootROM MBP51.007E.B05, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 256 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.7f1, 2 service, 12 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543225L9SA02, 232,89 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: USB Optical Mouse, 0x046d (Logitech Inc.), 0xc046, 0x06200000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000
I was having kernel panics quite often before 10.5.2, and they don't seem to have stopped even after the upgrade. Someone mentioned that it might have been the aftermarket RAM I installed (which is fully up to apple specs btw). But I noticed something on the error report that leads me to think it might be my M-Audio firewire external sound card instead. I've highlighted the spot in red.
Quote:
Sat Feb 23 16:18:06 2008
panic(cpu 3 caller 0x001A8C8A): Kernel trap at 0x7373694b, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000045, CR3: 0x01004000, CR4: 0x00000660
EAX: 0x0c7cd3c0, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x09bcca40
CR2: 0x00000045, EBP: 0x92ed3d18, ESI: 0x0a332800, EDI: 0x09e2b000
EFL: 0x00010202, EIP: 0x7373694b, CS: 0x00000008, DS: 0x09600010
Error code: 0x00000002
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x92ed3ad8 : 0x12b0e1 (0x457024 0x92ed3b0c 0x13321a 0x0)
0x92ed3b28 : 0x1a8c8a (0x460550 0x7373694b 0xe 0x45fd00)
0x92ed3c08 : 0x19eb67 (0x92ed3c20 0x80 0x92ed3d18 0x7373694b)
0x92ed3c18 : 0x7373694b (0xe 0x48 0x92ed0010 0x420010)
0x92ed3d18 : 0x9888eb03 (0x9e2b000 0x293 0x92ed3d48 0xffffffc3)
0x92ed3d88 : 0x9889331a (0x9e2b000 0x0 0x0 0x92ed3e1c)
0x92ed3e38 : 0x9887ff72 (0x9e2b000 0x0 0x202 0x694c1000)
0x92ed3e58 : 0x98869196 (0xa133c80 0x972d180 0xa632cee7 0xdf3d8d0)
0x92ed3e88 : 0x98868f77 (0x694c1000 0x1 0x25cf 0xdf3d8d8)
0x92ed3ea8 : 0x988694dd (0x694c1000 0x0 0x0 0x1008e78)
0x92ed3ec8 : 0x98866e5b (0x694c1000 0x988ac1f8 0x92ed3ef8 0x402cf1)
0x92ed3ef8 : 0x41f105 (0x694c1000 0xa2e7000 0x0 0x0)
0x92ed3f48 : 0x98866fa7 (0x9b559c0 0x98866d2e 0xa2e7000 0x0)
0x92ed3f78 : 0x13ea34 (0x694c1000 0x9cb6e60 0x1a236f 0xc5fa208)
0x92ed3fc8 : 0x19e93c (0x0 0x0 0x1a20b5 0xdf3d8b8)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleFWAudio(2.4.0fc8)@0x9885e000->0x988acfff
dependency: com.apple.iokit.IOFireWireFamily(3.4.0)@0x61b000
dependency: com.apple.iokit.IOFireWireAVC(2.2.1)@0x9881f000
dependency: com.apple.iokit.IOAudioFamily(1.6.4b7)@0x920000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9C31
Kernel version:
Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
I'm having crazy kernel panics on my 1GHz iMac G4, every 15 mins or so. There was a power outage and it wouldn't boot up (stuck on gray screen) so the MacGenius wiped my hard drive and reloaded 10.3.5 (yeah I had 10.3.9 - old stuff). Before the MacGenius got to it, the Hardware extended test showed no memory failures, but now the Hardware test shows: memory error detected, 2 MEM/1/4: DIMM0/J22.
I can't get the software update to run, but the kernel panics happened when I had the latest updates (for the 10.3), so I don't think thats the issue (but another issue).
I have had the computer open before so I'm comfortable with crackin it open, but if I were to pull one of the ram cards, which one is DIMM0 ?
Is the ram bad? Is this causing my kernel panics?
I'm in possession of a mac pro 2x 2.8ghz intel quad core running leopard. I have a main hardrive and a secondary harddrive. I was attempting to reformat the first hd and reinstall leopard. I pop in the cd as I have with many other systems, click the install startup and reboot, after about 4 minutes of waiting I see the black screen drop and it asks me to restart my comp, presumably a kernel panic error. I've done this with two different hd's to rule out it being an hd problem. I've also procured a friend's copy of leopard and the same problem occurs. The system was acquired from a local business that closed recently and sold off it's stuff which is how I came into possession of the system. It has no 3d party hardware that I can see. I find myself wondering if it is a problem with the motherboard and since the system used to be for business purposes perhaps there is some sort of block or lockout on the mobo that's preventing an installation.
View 7 Replies View RelatedMy computer broke down so I had a repaired and the original software was re-installed and it worked perfect. Whenever I restore from Time Machine, I get the kernel panic error. I have to reload the original software and it works perfect again. I tried using Migration Assistant, but it fails every time after 30 minutes of saying 1 minute left to transfer documents. I go in to Time Machine and view my external hard drive and all my stuff is still there, except I noticed my applications are crossed out. At least the non-default ones. That may just be because they're not currently loaded.Â
What can I do from here? I was using Lion before my computer went down. I'm now using the OSX install DVD. I also have the Snow Leopard, but haven't tried that, if it even makes a difference.
Info:
iMac, Mac OS X (10.7.2)
I have an eMac (G4, 700mhz, 768mb ram......yes I know it's old and decrepit...but so am I )) and when playing music using iTunes 9.0, my machine crashes with a "kernel panic." I'm only playing songs stored on the hard drive.
View 2 Replies View RelatedI bought an iBook G4 a few months ago, with the airport not working, causing kps, but i could still boot up. The repair to this was to open it up, and sandwich a thick piece of paper on the airport card inside the ibook. This solved my airport problem and i could use the internet without any problems. Then one day, I turned on my iBook, and it gave me a bright 'You need to restart your computer'. message with 4 different languages. I restarted it hundreds of times, constantly giving me this kp. Then i formatted my harddrive, re-installed leopard (10.5.6) via target disk (partitioned it, restored the smaller partition with leopard, then booting off that partition in target disk mode). I then deleted that smaller partition with ipartition, resized the main partition, did 3 Disk Repairs (disk utility) and rebooted the iBook. Still the same kernel panic. CMD-S gave me this error: Code: Wed Dec 31 18:12:10 1969 Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000120 PC=0x000000001761039C Latest crash info for cpu 0: Exception state (sv=0x12de2000) PC=0x1761039C; MSR=0x00009030; DAR=0x00000120; DSISR=0x40000000; LR=0x1761275C; R1=0x16DFBAA0; XCP=0x0000000C (0x300 - Data access)......
View 2 Replies View RelatedI have a BIG problem with my old powerbook. I have decided to format it.
It came with tiger, I had installed leopard with an upgrade DVD (not full version).
What I did: I inserted the leopard upgrade dvd and told the pb to initialize and install. After a while I had an error message. It already deleted everything, so when I insert the leopard dvd, it doesn't find any other OS, therefore I can't install the upgrade.
NO PROBLEM, I have the 2 tiger DVD. I insert the first one, pressing C, no. It does not start.
NO PROBLEM, I connect via firewire the powerbook to a macpro. I open the cd 1 of tiger (in the macpro) go to the installation file, and start the installation via firewire. It tells me that I have to partion the disk in Mac os extended with an option "GUI" (something like that).
I have noticed that the GUI mode is for an intel based mac, but mine is ppc...but if I select any other option the system doesn't allow me to continue with the installation of OSX]
I did it, and the installation proceeded well. After a while It asked me for CD2, I inserted it and finished the installation succesfully.
Now I started my powerbook...and is not working, again Kernel Panic...but now there is the OS installed, so...why?
my used eMac 1.42 ghz with 2gb ram, tiger 10.4.11 began to freeze a few months ago so I cleared the hard drive and reinstalled = worked ok for a while. Now, it is regularly freezing and even locking up when it has been running for a while - when it heats up. Until it cools off a while, on restart or after shutdown, it will hang at the grey screen or display a flashing folder with an alternating finder icon and a question mark - I assume it can't find the OS. After rebooting, I got the report function with this info
View 1 Replies View RelatedI'm relatively new to Macs and I wanted to try a clean install (or erase and install) on my ibook. I recently purchased a MBP and since Leopard is on the horizon, I wanted to do a "trial run" of installing an updated operating system. I know that you can just hit update instead of doing a clean install, but I've been reading that things run better when you do a fresh install. My old ibook still has Panther on it and I figured I could try to install Tiger on it from my MBP disks.
I know that this represents a violation of the license, but I thought it would be worth it to ensure that I don't make any major mistakes when I'm doing the same procedure with my brand new MBP when Leopard gets released. When I tried booting from the disk from my ibook I got a kernel panic which I interpreted as a sign that it was not a good idea so I abandoned the project. Now every time I try to start my ibook I get another kernel panic and I'm afraid I just broke my old computer.
Since yesterday I have not been able to boot normally into Leopard. I had just switched of my ADSL modem and the computer froze after that it never boots in normal mode. I am in safe mode, the audio does not work in safe mode, everything is working. I am attaching the crash report in text format. I did try to boot after removing all the peripherals, also tried to reinstall but the computer does not accept the install disk , just ejects them. I am in real trouble now, suggestions are welcome. I am using a PowerPC machine specs PowerMac G5 1.6ghz with 1.25 GB RAM running OS X 10.5.5
View 5 Replies View RelatedI have a 2 GHz Intel Core Duo MacBook with 1GB of SDRAM. I have OS X Tiger v. 10.4.6, and I just recieved Leopard v. 10.5.4, and I am attempting to install it. If it makes any difference, I have my harddrive partitioned - 40GB for OS X, and 30GB for Ubuntu Linux (8.10 Intrepid Ibex), and rEFIt to switch between the two. I booted into Tiger and popped in the Leopard installation DVD. A window popped open with an icon to install Leopard. I double clicked on this, and it told me to restart. So, I pressed the restart button in the window, and the computer restarted, automatically booting into the OSX DVD.
The Apple logo popped up, with the little spinning wheel. It churned for a few minutes, then it had a kernel panic: So, I did as the notification told me, and restarted. It automatically booted into the DVD again, and the same thing happened. Next time, as a booted up, I held the eject key down, and I was able to get the DVD out. So, I'm back to where I started, but I don't have Leopard installed. There are several minor scratches on the DVD, but nothing I would expect to mess with the DVD. Another thing: I popped in the Leopard DVD, and opened the Disk Utility after this fiasco, and verified the DVD. I got this error output:
Code:
Verifying volume "disk1s3"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Invalid node structure
The volume Mac OS X Install DVD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
However, the "Repair Disk" button is greyed out. I don't want to go through the Apple Support Hotline.
Bought a new Macbook Pro 2.8 a few days ago (newest one with longer battery), it shipped with Snow Leopard. However, I believe the Hardware is still the same as before Snow Leopard was released, so it should work with Leopard 10.5.
If I try to use a Leopard disc it just doesn't boot, or it comes up with a kernel panic. I even installed Leopard on my 2.5" in my Mac Pro first, then tried booting it on the macbook pro. Same thing, kernel panic. Have they added some kind of lock to the hardware that stops Leopard from being loaded? I thought they would only do that when new hardware is released.
I am pretty new to the forums but I installed snow leopard on an 2008 iMac 2.4 ghz, 3gb of ram and 250gb hard drive on September 1, 2009 and had no problems shutting down.
Then on Wednesday when I shut down it goes into a kernel panic and tells me to restart. When I go into the other user account it does not do that. I have a picture of the error log that i got when I started the computer up to submit to Apple. Can someone please help.
I have reset PRam, repaired permissions, and reinstalled Snow Leopard but recovered it from a Time Machine Backup. I do not know what to do.
First the bad news - consistent kernel panics
Good news - found a remedy in disabling my screen saver.
I'd like to use my screen saver without getting kernel panics. I've tried erasing my drive and restoring from a back up. resetting PRAM, repaired permissions and ran Tech Tool Pro 5 (file structures and repaired permissions, everything else checked out fine).
I have a Macbook with 10.5.4 and got a kernel panic suddenly. My Macbook was off. Yesterday evening I shut it down and everything was well with it, no problems at all. This morning I turned it on, and after the normal grey screen at the startup, I got a kernal panic before Leopard even started. I am familiar with kernel panics but not when they occur before the system started. I turned my Macbook off and on again while holding the Alt, Apple, P and R keys and waited for the chime, 3 times. After that, my Macbook started normally, no kernel panics, it just started the system and I was ready to go. However, I am really scared now. Does a kernel panic at startup indicate harddisk problems? Was it just a coincidence? I am afraid to turn my computer off, it might get a kernel panic again. I checked permissions and all seemed well, but I am hoping someone can tell me more about kernel panics at startup.
View 3 Replies View RelatedI've upgraded my MBP to Snow Leopard today from Leopard and I'm getting a Kernel Panic when I login as one user. Logging in as an Admin user or a new user account is fine, and I still get the Kernel Panic if I boot up in to Safe Mode. It's obviously a problem with the user account and looking at the dump log it seems to be caused trying to mount something, but I can't for the life of me track it down.
[Code]
Installed Snow Leopard (retail box) onto a last-gen Aluminum MacBook Pro (2.6Ghz model). Did a time machine backup. Put in CD and upgraded. Rebooted with no peripherals plugged in and I get a kernel panic. There's only one user on this machine so I can't see if it's an account problem. I did the same thing on both my Macbook Air and 17" MacBook Pro.
Question: Do I have to now Reinstall Leopard (fresh)
Then update Snow Leopard
Then restore from Backup?
OR
Install Leopard
Recover from time machine backup
Then install Snow Leopard
I don't have all day and really don't want to screw up the process. Is there any thing else that might say why this kernel panic is happening?
Over the weekend I tried to backup my MacBook Pro onto an external harddrive, and when about 23Gb out of 110Gb were completed, my mac went into a kernel panic ("You need to restart your computer. hold down the power button until it turns off, then press the power button again." in four languages). Previous backups went fine. So I did a reformat of the ext. hdd, same thing: after about 20 or so Gb of backup, the msg. pops. otherwise the mac runs without problems. Did a virus check, which came up negative.
Here is the panic log:
Interval Since Last Panic Report: -6 sec
Panics Since Last Report: 1
Anonymous UUID: 7254B2B2-A9E2-40B3-9A00-06A141425C7F
Mon May 28 06:53:53 2012
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00270ea8, type 14=page fault, registers: .....
Info:
MacBook Pro, Mac OS X (10.7.3)
