the original optical drive in my G4 had been dying for a while - it would only respond to "eject" commands if there was a disc in the drive. If I inadvertently closed the drive without a disc, it would refuse to eject. It tried. It made a little motor sound, like it was trying to eject, then it gave up with an even smaller motor sound.
View 3 RepliesThis just started happening within the past month or so. None of my USB drives are being recognized or mounted. They appear within Disk Utilities and I can verify and run checks on them, but they do not mount. This isn't limited to one device or any specific port. It happens with USB memory sticks, external Maxtor drives (two different ones) and now my Canon PowerShot camera. Basically anything the Mac would mount as an external drive has this issue, so I know it's not specific to any hardware.
I do have a work around that I found on [URL] -- If I reboot with the device plugged in and hold the 'command' key the drive gets mounted. Next time I try the device though (in the case of my camera plugging it into another computer) it's not recognized again. I basically have to do this reboot procedure any time I want to use any device.
My Mac Pro is not mounting any new hard drives for some reason. The one's already connected work fine and remain connected (I have three drives connected via eSATA ports). But I can't connect any drives via Firewire 800 or 400. I've tried differnt leads and different ports but none are connecting. I've tried the drive on a different Mac and it connected fine. But on the machine I need to connect to the drives simply dont mount. Nor do they show up in Disk Utility or Soft RAID. I have restarted and powered down several times but nothing is working.
Running OSX 10.6.8 on a Mac Pro (2008) The hard dirves I'm connecting are Lacie.
Info:
Mac Pro (2008), Mac OS X (10.6.7)
I recently got a 2008 Macbook air with 10.5.6 installed. It was a floor model.also, the date when i booted it up was before 2001 for some strange reason.anyway, i have a WD 320 gb passport, usb ind. power external. It worked just fine two days ago, but now i upgraded through "Software Update" and..-It does not mount in finder, sidebar, or disc utility.
-the power light turns on
-cannot force mount with 3rd party software (Mount Me! 2.05)
-the MBA will also not mount any SD cards!! I have tried two different cables and even my printer!!-iPod Touch works just fine in the same port-SD cards and WD Passport work fine in anything else
About 90% of the time, SD cards and external hard drives are not mounting as soon as they're connected (via USB or the SD card slot). I need to launch disk utility, and mount volumes manually (disk utility is detecting the devices). This has persisted through multiple 10.7.X updates.
Info:
MacBook Air, Mac OS X (10.7.3)
[URL]. I found the bracket now can someone recommend me an arm that I could have on my wall that is compatible and also is available in the UK.
View 1 Replies View RelatedMy hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
My G4 MDD (1.25 CPU, 2G RAM, OSX 10.5.8) needs a new drive.
I'm told SATA drives are the thing to get.
I don't know what a SATA drive is, or whether it is compatible with my machine.
I was looking around at CompUSA and noted all of the drives for discs possible. I saw the Sony Blu-Ray and a Memorex/Sony/LG DVD Superdrive and was wondering that if the box says that they are only PC, does that mean that they aren't compatible with Mac? Also can these drives be reflashed for use on a Mac? I would be very interested in sticking the Blu-Ray Sony drive on my G3.
View 7 Replies View RelatedIn my current dual 800mhz PowerMac G4, I have two 80gb hard drives which were ordered from Apple (didn't know better at the time). Will I be able to put them in my Mac Pro when it comes in a few weeks, or are they too old to be compatible?
View 5 Replies View RelatedMy G5 PowerPC will not recognize any external drive, on the desktop or Disk Utility. One showed up briefly, but the computer locked up . I've tried each drive on my Imac and they all show up and work perfectly.
View 1 Replies View RelatedI currently have a 2010 Mac Mini connected to my TV with 3 external drives with my movies/tv shows/itunes attached. I have an old PPC g5 iMac in the other room doing nothing. Can I use that iMac as a server with the external drives attached and have Plex read them all from my network on the Mini?
View 2 Replies View RelatedI was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 1 Replies View RelatedA buddy of mine has had a Power Mac G4 sitting around for a while now. I asked him about it, and he told me that I could have it if I wanted. He really only uses his MacBook Pro anyways. So, I get home, plug it all in, and nothing happens. I opened up the side and everything seems to be in place. There seem to be 2 hard drives, one which isn't screwed in. One of them isn't plugged in, I'm not too sure what that's about. Power supply is there, RAM is there. I don't know why it's not coming on. When I push the power button, a light on the front flashes for a second, but nothing happens. I know it needs a RAM upgrade, and probably a processor upgrade as well. However, first, I'd like to get it running first.
View 1 Replies View Related???
View 2 Replies View RelatedI have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?
View 10 Replies View RelatedI been searching the net for an answer but everything requires to buy something. I have my original hard drive of 140 GB and just bought a new one thats 1TB. I want to transfer my applications from the 140 to the 1TB. Is there a simple way of doing this.
View 7 Replies View RelatedI've just bought a second mac - little cheapie to use as a second machine. The guy had it set up with three drives showing on the desktop: OSX, CLASSIC and FILES. I don't need OS9/Classic, or the FILES folder, so I threw them in the trash & emptied it. However, it's showing that I only have 4gig of space on the hard drive. I went into system prefs/disc utility, and it's still showing the drives I deleted - although greyed out. Its seems to still be allocating them 5.9gb each of space. In the column on the left in disc utility, it shows the following drive icons:
19.1 GB MAXTOR 92049U3
OSX
CLASSIC
FILES
I tried deleting them through utility, but I must have done something wrong, as they just popped up on my desktop again. Looks like I need to remove partitions.
This issue has been killing my work flow for quite awhile. I have a G5 dual 2.0. I can barely read or write files to an external hard drive. Say I try and copy 1.56GB of audio (12 files) from my external drive it will start to copy then stop at 500mb for minutes then start moving as normal and stop again around 900 for minutes.. then again at 1.4. This also happens when writing.
Here is the confusing part. This happens with two external drives (different models) with firewire 400, 800 and USB. I have reinstall OSx. I have repaired permissions and ran repair disc on everything. These hard drives work FLAWLESS with my Macbook Pro as well. Gr what can this be? It takes forever to copy data to or from a drive which is often how I transfer audio between my desktop and laptop. I should soon have Mac Pro money and this crappy G5 can go out the window. I am on 10.4..
Is possible to just swap the 500g hard drive into the G5 Power Tower instead of cloning the hard drive - Both PPC ?
View 4 Replies View Relatedare all hard drives compatible? i think so but i want to know for sure. i know apple has little things they do to make you buy apple stuff
View 2 Replies View Relatedi was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 11 Replies View RelatedI have two drives in my Quicksilver 2002 G4, one is a 250GB which can be fully used, the other an 80GB. Can U rid both of these drives and install two SATA 1.5TB drives? I do not want to use the PCI slots for a SCSI card and wire additional drives that way, because the transfer speed will be limited to 40mbps I believe. I have a Sonnet card a dual PPC 1,8Ghz card, a PCI USB 2.0 card and have other open PCI slots, but finally ran out of storage, and have a use for this machine to hold a LOT more. Other than the transfer speeds possible on SATA, are there any other differences between the original IDE (ATA) drives? Do they connect the same way?
View 9 Replies View RelatedI can't read any external hard drive on my laptop, but both mine and my friends smaller 250g WD HD were visible on his mac.
View 2 Replies View Relatedi am considering running a Raid 0 configuration on my Powermac 2x300gb drives. Right now i have duplicated everything onto a 250gb drive and have successfully booted with this drive. Does anybody know what steps i need to talk to Raid the two 300gb drives and move everything back onto them?
View 3 Replies View RelatedI have a PowerMac G5 with the first motherboard that is out of order, and another PowerMac
G5 Late 2005
with 2x2.0GHZ
Mounting the powersupply from the 2004 on the 2005 is the powersuply compatible or not?
EDIT: I looked on Mactracker and compared the two:
Max Watts in the first is 604W and 450W on the late 2005.
I want to put a powersuply from a G5 2004 (604W ) on a G5 2005 that had a 450W powersuply is this possible ?
I'm looking at the specs page for the MacBook Pro and it reads this...
Your MacBook Pro comes standard with a 5400-rpm Serial ATA hard drive. Choose a hard drive with a faster speed for greater performance. Or you can choose a solid-state drive that offers enhanced durability.
Basically suggesting that the HDD option has a performance advantage over the SSD, but is this the case? I always thought SSDs could read & write quicker because they use solid-state flash memory as opposed to hard disks.
I want to go with the 256GB SSD but I want to know how it ranks in speed.
I have a question regarding Time Machine functionality. Here's my situation. I have two hard drives in my Pro: one that operates as a Boot drive, and one for storage. Right now I have Time Machine set up to backup my storage drive, but I was wondering if it was possible to have plug in a second external drive and use it to back up the Boot drive. I searched for a similar thread, but couldn't really find anything. Has anybody successfully done this?
View 1 Replies View RelatedAs the title says, can you combine 2 drives to one large without the expensive raid card?
View 2 Replies View RelatedI have searched but I can't seem to find an answer to this question...
I have 4 x 500MB drives in my Mac Pro and 4 x 500MB external firewire drives.
Currently I use Carbon Copy Cloner to clone each internal drive to it's respective backup. ie Drive 1 > Backup 1, Drive 2 > Backup 2 etc
Is it possible to use Timemachine in a similar way? so that each internal drive has it's own corresponding Timemachine backup?
