i am considering running a Raid 0 configuration on my Powermac 2x300gb drives. Right now i have duplicated everything onto a 250gb drive and have successfully booted with this drive. Does anybody know what steps i need to talk to Raid the two 300gb drives and move everything back onto them?
View 3 Replieshow to use them i just got a two year old mac wit a stock 30gb hardrive, i took that out and put in a case, well apple took it out and put it in a case, now i tried attaching the external to my new 80gb in my ibook but its not mounting.
View 1 Replies View RelatedI have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?
View 10 Replies View RelatedI have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
I'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
View 1 Replies View RelatedI have a RAID 0 set up with two 1.5TB HDs. I am doing some reorganizing and want to take all the data on the RAID 0 and move it to one of the hard drives in the RAID 0 and create to single drives. Is there any way of moving all the data from a RAID 0 onto one of the HDs?
View 4 Replies View RelatedI have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies View RelatedCreated a slide show, Then a request for Black and white, No problem. Now I need to take the slide show back to colour, And the only way i can find is to go back to original un doing all the work I done in raw format. I saved everything in k peg. But the works had gone in the raw files, We need a way to step back after the presses on raw. From black and white back to colour, without having to revert to originals.
Info:
MacBook Pro, iOS 5.1, Lion 8 gb ram Custom HD screen. 750
I am about to install a new (blank) hard drive to my existing 2009 Mac Pro. The Drive will then be used solely for windows (won't be a partition, but a stand alone drive, separate from my other drives which are Raid).
On the apple web site, it says that the OSX software installed will provide drivers etc. Does that mean that I should:
1) connect the drive
2) format the drive under OSX
3) run the bootcamp assist...
Been using a macbook with time machine on an external hard drive for about a year and have finally bit the bullet and bought an iMac with time capsule for home as well. My job involved moving around quite a bit, but in terms of backup I was wondering if it was possible to use time machine on my portable hard drive for backups when I'm away from home, and then when I get back home for a while to create a master backup on my time capsule.
View 1 Replies View RelatedI know Windows XP is dated now, however, can it install on snow leopard? and if so, does anyone who a website with step by step instructions?
View 5 Replies View RelatedI have 3 PC/laptops already in my windows 7 network. My new mac pro is on the wifi just fine, but does not see my printer or my network and my windows 7 does not see my mac pro. Can someone step me through in very simple steps or send my to an article I can follow.
View 1 Replies View RelatedI've been using Apple Mail with POP Gmail for a few years now with problems. Generally I ignore the Gmail side of things and only ever access through Mail at home, and also use a Blackberry to send and receive emails.
At the moment Gmail pushes mail to my Blackberry and also holds it in the Inbox at Gmail until my Apple Mail app on my iMac downloads it, whereupon it's all moved to All at Gmail. This works fine, but is a problem when I use Mail on my Powerbook - once it downloads the new mail, Gmail moves it to All mail and when I get home and fire up my iMac's Mail, those emails won't appear there. Annoying. So, I need to go IMAP.
My problem is that as I have never bothered with tagging or sorting things on the Gmail side of things, and have done all my ordering through Apple Mail with custom folders and rules, I get the impression all that work goes out the window and I have to start over in terms of organising again, and that in fact any rules I want to set that I want to be duplicated across devices have to be done on the Gmail webpage. Is there any way whatsoever of somehow exporting my Apple Mail rules over to Gmail so that when I change to IMAP it somehow keeps things as they are as best as possible?
I need a step-by-step guide to display my weather image in Geektool. I got the idea from here:[URL]/The php script part beats me. My weather area code is SNXX0005(Serangoon, Singapore).
View 12 Replies View RelatedI am in the process of buying a hard drive for a PowerMac G4 that i just purchased. The computer doesn't have a DVD drive, just a CD. I have a copy of Tiger that could be installed but I would need a DVD drive. Would I be better off buying a cheap copy of Panther online somewhere and just using that, or buying a DVD drive and installing Tiger? Or finding another way to install one or the other on my Mac?
View 3 Replies View RelatedI upgraded my Power Mac G4 from OSX 10.2 to 10.3. Got 3 install discs. The puter asked for the 2nd disc but completed the install without asking for the final disc. Its working fine.
Not sure whether the 3rd disc is significant or whether I should leave sleeping dogs lie.
I am thinking of buying a macbook pro soon.But all the computers at home are windows.I would like to know if I buy a mac and pc compatible external hard drive,can I reformat it to HFS+ using windows and then copy my digital files like movies, songs and photos I have on my pc to the external hard drive,and use it with mac?If yes,how?
View 13 Replies View RelatedWhat site (s) do I go to, to download video's off the internet? What do I need to do this. I have a new iMac Leopard, and I am relatively new at this ...
View 3 Replies View RelatedI just purchased a Seagate FreeAgent GO 640 edition. I pulled the hdd out and I am getting all my info migrated over as we speak, I will keep everybody posted on performance
View 11 Replies View RelatedI recently was given an 15 inch iMac G4 with 256 MB RAM and 800 MHz processor and was running OS X 10.3.9. I upgraded the RAM to 512 MB and installed Leopard using a firewire connection with my MacBook. I can boot from the MacBook Leopard but the iMac will not boot or seem to find the Hard Drive. I can see the Hard Drive on my MacBook with Leopard installed on it. All I get on my iMac is a "finder" with a question mark.
View 3 Replies View RelatedIs there a step by step guide somewhere to show how I can put a 2nd drive which would be a small SSD drive to boot only for bootcamp and OSX?
View 9 Replies View RelatedI've got a desk that has a 16 + 7/8" tall space for a computer (that's 42.75 cm for the rest of the world). I want to fit a mac pro in there.
A couple of people have done it, but there are really no step-by-step guides, or detailed pictures.
See here and here.
He has a rather large photo collection on his PC, and he has everything in precise Folders as far as Named Folders and even Named Folders within Folders.
Does anyone know of a way to maintain the folder names and keep the folder relationships he currently has?
My first attempt was to import his whole library, but iPhoto did not do a good job of keeping form. What it yielded was a massive amount of "events" but still did not Ring true to his folder namings.
To start off, when I got my new macbook pro I transferred my information from my old macbook, but there was 2 accounts. One was mine, and the other was the administrator account my school put on there which i didn't move over.
When I finished i found out that I could not do anything since I did not have permission. After many hours talking to apple over the phone they got it working, but some things don't work entirely right, and somethings are completely broken.
I tried to fix the things individually but that didn't seem to work. So I want to restart my computer. I have an external hard-drive already that I will save all my documents and applications, but I want to know which method will make it as if I am restarting my computer for the first time.
Info:
MacBook Pro, Mac OS X (10.7.3)
The time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
I just got a brand new MAC PRO desktop. It came with a 600GB HDD. I purchased a second identical internal 600GB HDD. I wanted to do setup a RAID 1 using these 2 drives. Currently the main drive has the OS and all my other apps installed. I installed the 2nd drive and was fooling with disk utility. I'm not sure how to set this up however. I tried numerous guides online but I just cant figure it out.
MAC PRO (takes up to 4 internal drives) - currently installed 2 identical drives
Leopard
Using Disk utility
The RAID tab says "online" and the status is green (indicating the RAID is working). However on my desktop i see the 2nd hardddrive mounted with no contents in it. I just want to able to use the 2nd drive as a mirror so this way if one fails I'm still up and running.
I've been looking for a guide on how to disassemble my Early 2008 Mac Pro, yet I can not find anything. Does anyone know where I could find one because I am trying to add another sata hard drive but the plastic casing is in the way.
View 6 Replies View Relatedwell i updated to snow leopard a while back when it first came out. i've been reading that rosetta was a default for Leopard..but is now an optional install for snow leopard..
but every time i try to install microsoft office 2008 and Photoshop, the installers prompt me to install rosetta. i know that office 08' is a universal, but the installer is PPC..
i understand that its only 2.0MB to install rosetta..but will it slow my computer down or anything? can i remove it after i install it.. it was obviously not made a default for SL for a reason. and last thing, will it convert anything that runs universal to PPC when ever i open it?
I just got the apple mac pro raid card today, but after I connect it and all 4 SAS drives, the MAC OSX Installtion program can not detect the SAS at all, I open the RAID Utility but no dirve there, the battery is in charging status.
View 2 Replies View RelatedI currently have a 2TB WD mirror edition that is setup in RAID 1 so it will mirror all my data. Now I also have a bunch of other drives laying around which I also feel the need to back up and currently I am doing this by doing a whole bunch of dragging and dropping and copying and pasting etc etc etc and this is making me very tired. I know that a setup is possible in disk utility but I am not at all sure about how to configure it so I wont lose any of my data.
Some details about my setup:
Mac OS X 10.5.6
PowerPc G5
Harddrives: two 1TB WD MyBooks, and two 500gig WD Mybooks --> these pairs need to mirror each other and make my life less of a hassle.
