Mac Pro :: Can I Install 4 Drives But JBOD 2 Drives As 1 Large Disk?
May 15, 2009As the title says, can you combine 2 drives to one large without the expensive raid card?
View 2 RepliesAs the title says, can you combine 2 drives to one large without the expensive raid card?
View 2 RepliesI'm looking at the specs page for the MacBook Pro and it reads this...
Your MacBook Pro comes standard with a 5400-rpm Serial ATA hard drive. Choose a hard drive with a faster speed for greater performance. Or you can choose a solid-state drive that offers enhanced durability.
Basically suggesting that the HDD option has a performance advantage over the SSD, but is this the case? I always thought SSDs could read & write quicker because they use solid-state flash memory as opposed to hard disks.
I want to go with the 256GB SSD but I want to know how it ranks in speed.
I have a 24" iMac and it was running fine the other week and now I get this annoying error=36 whenever I try to transfer large files from desktop to my external drives. It goes about 1/4 way with the transfers then stops with the error=36 message. I've tried to reset the pram but it won't let me. It just keeps on restarting to the same gray screen with the single short beep tone over and over until I let go of the option, command, P & R buttons and restarts normally but does not reset the pram.
View 1 Replies View RelatedI have a question regarding Time Machine functionality. Here's my situation. I have two hard drives in my Pro: one that operates as a Boot drive, and one for storage. Right now I have Time Machine set up to backup my storage drive, but I was wondering if it was possible to have plug in a second external drive and use it to back up the Boot drive. I searched for a similar thread, but couldn't really find anything. Has anybody successfully done this?
View 1 Replies View RelatedI'm a graphic designer but I don't know much about my computer's inner workings. I have a mirrored drive door dual 1Ghz G4. I have two SATA drives that were used in a Dell server on a RAID setup. They are Western Digital Caviar HDs, 250 GB apiece.
My question is: is there any way to install one of these drives in my computer?
I added a second harddrive to my Mac Pro. As it happens, it is larger than the primary harddrive. What I would like to do is use the larger harddrive as my Mac OS disk, while using boot camp to set the smaller one up with windows. when I set up the larger one with 10.6, do I have to use the install disks, or can I just copy all of the files from the old disk to the new? Are there any hidden files that I need that might get left behind?
View 1 Replies View RelatedI thought having a Macbook and a PC and keeping data sync'd between the two would be easy, or so Apple et al would have me believe. So far I've not only found out that their IP over FireWire, the only feasible way to transfer the large amounts of data I have, is seriously lacking (i.e. I haven't been able to get it to work!) but also that when I try to ease my woes by connecting the Macbook as a FireWire drive in Target Disk Mode, it fails to deliver again. The first time I connected my Macbook to my PC over FireWire in Target Disk Mode, it popped up in My Computer no bother. Alright, so the only partition I could access was my XP partition on the Macbook (thank goodness I have that or I'd be right up the creek!), but I suppose it's to be expected, what with OS X and Windows having different file systems ETCETERAH.
So I'll copy all my media files to the XP partition and then copy them to my XP PC from there, I thought. Every following time I've connected in Target Disk Mode, I've received nothing but a 'removable disk' icon in My Computer which, when clicked, asks me to 'insert media'. WTF, Apple?! So not only can I not have my OS X drive show up in Windows on my PC, but now I can't even have the XP drive show up?! I didn't change anything, I didn't do anything differently, I literally just rebooted OS X to copy the files I wanted from the Apple partition to the XP one. Sorry to come across all 'angry like', it's just not the first, second, or third problem I've encountered since 'switching'. For a company who prides itself on how its products 'just work', it's becoming an eye-opening experience. However, I understand it's probably something I've done incorrectly, rather than the fault of Apple or Microsoft. So I ask you, what am I doing wrong?
I have vista running on a Partition on my Hard Drive. I'm sick of looking at the "UNTITLED" Disk drive on my desktop. Is there a way to hide it? (I can't even rename it)
View 12 Replies View RelatedMy external hard drive has been corrupted and the error message is telling me to reformat it. However, through all the research I have done to find out how, everything I've found has told me to use Disk Utility to just erase everything on the disk to do this. When I try to do this, it tells me that I can't erase anything because the disk cannot be unnmounted. What should I do?
View 4 Replies View RelatedFor no apparent reason, folder and disk drives will not open when I double click on them. After some time the problem goes away and then returns several days later.
View 1 Replies View RelatedI'll be getting a Mac Pro with SAS drives. I will need to run XP64 or Vista (at least in the short term) for the specific application I intend to use.
Questions:
1. I've heard that it is not possible to install either XP64 or Vista if the SAS RAID card is installed. Is this true?
2. If so, can I forgo using the RAID card and the SAS drive for the main system hard drive and instead use a SATA drive - and still install SAS drives in the other slots so I can still get the throughput and rotational speed benefits of them? (I don't need to RAID them.)
Thinking of using 500GB and 750GB internal drives for a raid 0 startup disc (software raid obviously)?
Information:
Dual 2.5 G5
Mac OS X (10.4.11)
Is it possible to install 4 SATA drives into a G5 tower? I didn't open it up yet cause I have to move so much material to get to it. I'm assuming you can purchased a SATA PCI card but is there room in the case for 2 additional drives?
Information:
PowerMac G5
Are there any external Drawer loading drives (usb) that accept the 8cm disk as well as the standard DVD disk.
View 1 Replies View RelatedI see a lot of info about problems with various external drives working with Time Machine. I have Lion 10.7.3 and find that my old external drive that worked with PCs doesn't work. So, does Apples have a list of recommended esternal drives or at least a list of ones Apple knows are compatible?
Info:
iCal, Mac OS X (10.7.3)
Usually MacBooks come with Hitachi drives, and I'm wondering if it's possible to install a hard drive onto a MacBook Pro (2.4ghz Unibody) that isn't a Hitachi. (Western Digital, ...)
Would there be driver problems (Heating up, ...) and also the hard drive free-falling locking feature be disabled?
I have searched but I can't seem to find an answer to this question...
I have 4 x 500MB drives in my Mac Pro and 4 x 500MB external firewire drives.
Currently I use Carbon Copy Cloner to clone each internal drive to it's respective backup. ie Drive 1 > Backup 1, Drive 2 > Backup 2 etc
Is it possible to use Timemachine in a similar way? so that each internal drive has it's own corresponding Timemachine backup?
I have successfully installed Windows Vista Home Premium on my MBA through Boot Camp. I have tried to install the MBA drives from the OS X install disk repeatedly, but without success. The "setup.exe" seems to be working fine, but after restart, Windows does not seem to recognize the Mac drives. Updating the drives manually did not improve the situation. Does anyone know how to install the drives correctly?
View 1 Replies View Relatedi have this strange issue that occured just out of nowhere without me (knowingly) having contributed anything to it.yesterday i launched my iMac and my external firewire drive wasn't showing up in neither the finder nor on the desktop. i instantly thought about a hard drive crash, but soon tried other things to evaluate (or not) my guess.
for instance, i unplugged the drive waited a few minutes before i plugged it in again. since this iomega drive is also equipped with a regular usb port i also switched cables and tried connecting it via the iMac usb sockets as well as via an usb hub without any luck. the drive still won't show up. so i launched the Disk Utility, to see if the drive needs some checking/repairing, but to my surprise it wasn't showing in Disk Utility either.
thus far i only considered this to be an issue with only this particular external drive, but when i eventually switched on a 2nd external drive (this time an usb drive i use for Time Machine) that drive also refused to show up in either the Finder or the Disk Utility app.
curious as i was, i then fired up a 3rd and 4th external drive and now had all 4 drives running at the same time. none of which were showing up, just as if they weren't even connected with the iMac.
this strikes me as more than odd. i've heard about hard drive failures and crashes. they just occur over time. maybe and under some very strange coincidences it is possible that two external hard drives quit their jobs at the very same time, but seriously .... 4 of them?? i hardly think so.
well, maybe it's the iMac's usb/firewire controller that's causing the trouble, i thought. but then again, my other connected devices (iPhone, iPad, Printer, Scanner, eyeTV) are functioning and get detected just fine as far as i can tell.
i have no idea what's going on. i dismiss the idea of 4 external drives having crashed all at the same time just as much as i don't think that the iMac's usb/firewire controller has got any issues. re-formatting any of the 4 drives is out of the question and even if i'd consider such desperate measures, the Disk Utility wouldn't let me re-format anything anyhow, because the drives aren't listed there. i wish i could just use my Time Machine to resolve the issue but, as i mentioned earlier, i can't access the Time Machine because it also won't show up.
Info:
iMac, Mac OS X (10.7.4)
I want to install snow leopard in my macbook (late 2006), but Im going to change my hard drive in two months. So i dont know if I have to wait for my new hard drive or not.
Info:
MacBook, Mac OS X (10.6)
I've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
View 2 Replies View RelatedI need to get more space on my start up disk. How do I free up space by transferring to one of my back up drives?
Info:
Mac Pro, Mac OS X (10.7.4)
So has anyone tried the new Bootcamp 3.0 drives off the Leopard disk with Windows yet? Do they support Windows 7 now? Any improvements to battery life, heat, etc?
View 9 Replies View RelatedI'm a right noob so please bear with me.
I have infront of me a 2.8 Quad 2010 Mac pro with the 1tb drive that shipped with it, a further 1 tb caviar black and a 120gb OCZ Vertego 2 3.5' SSD.
Where do I start? I haven't even booted up the Mac pro yet. I would like the SSD to be the boot drive so it will require the OS installing somehow and my apps and the other 2 drives will hold my content such as FC studio and Logic Studio content and media files.
I want to install Windows 7 on a drive and don't know whether it's best to give it an entire drive or just a partition, whether to use Bootcamp or a VM such as Parallels.
So sorry, I have used Mac Pros before but I have never ever set one up and to be honest need someone to hold my hand through this!
I saw in an old post from 2006 that someone added a 400G IDE hard drive under the Superdrive.
Can this still be done? Is the Superdrive in the new Mac Pro an IDE drive and can an IDE hard drive be added in the 2nd optical drive bay as a slave?
It seems that OWC now has some bluray drives available for the macpro..
[URL]
I was wondering if anybody has inslalled any of the intenal blu-ray drives on a macpro yet?
Obviously, many don't go for Apple's drives, etc for pricing reasons, but does anyone know why Apple doesn't have 15,000 RPM drives as options (like they did for the previous Mac Pro line)?
View 4 Replies View RelatedI'm hoping someone more knowledgeable than myself can help me out. I have a 2006 Intel-based Mac Pro:
Processor: Two 2.66GHz Dual-Core Intel Xeon processors
Ram: 6GB (two 512MB) of 667MHz DDR2 ECC fully buffered DIMM
HDD Bay 1: 250GB Serial ATA 3Gb/s; 7200 rpm; 8MB cache
OSX: Tiger
I need to upgrade to Snow Leopard to be able to use newer Leopard & above only versions of software ie FCP, Aperature, etc.
The issue is that I would like to keep the Tiger OSX as I run Pro Tools LE 7 on it. Upgrading to Snow Leopard would render Pro Tools LE 7 incompatible and I would have to buy it again.
So here's what I'm thinking. I would like to install a secondary HDD in Bay 2 and install Snow Leopard on it.
Is it possible to have OSX Tiger on the HDD in Bay 1 and have OSX Snow Leopard on the HDD Bay 2? Could they each be a different startup to be selected via System Preferences or at bootup? I would only want to run one OS at any given time.
If so what would be a workflow for installing the 2nd HDD and setting it up with OSX Snow Leopard.
Also, compatible hard drives for the 2006 Intel Mac Pros seem to be harder to find now. I called Apple and they no longer sell any compatible internal HDDs.
I see Seagate & WD have announced these but I'm struggling to find many available to order. Only the WD Green one appears to be even offered as an internal option. What is more it is more expensive buying the internal drive than buying the external USB one.
Has anyone bought one of these externals and stripped out the drive to put in their Mac Pro? I'm running out of space on my 1.5TB and swopping to 2TB hardly seems enough.
I need to create a virtual drive but dont want to buy lots of expensive software as Idont do this very often. basically I have an ISO I need to set as a drive (alcohol 120% would do this in PC world)
View 17 Replies View Related