PowerPC :: Dual 2.0 Ghz G5 Support Sata 300 Hard Drives?
Jun 29, 2009i was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 11 Repliesi was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 11 RepliesI was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 1 Replies View Related1) Does Bootcamp properly support Vista 64-bit ? If so how stable is it (don't want any crashes caused by poor drivers - really want rock solid stability under Vista) ?
2) Will the Mac Pro support any SATA hard drive or would I have to buy specific models/brands ?
My G4 MDD (1.25 CPU, 2G RAM, OSX 10.5.8) needs a new drive.
I'm told SATA drives are the thing to get.
I don't know what a SATA drive is, or whether it is compatible with my machine.
I'm trying to install this hard drive in my Powermac. Here's the drive I'm considering installing:
[URL]
Will it work with my "Ultra ATA" Interface or will I have to buy a SATA card?
I have two drives in my Quicksilver 2002 G4, one is a 250GB which can be fully used, the other an 80GB. Can U rid both of these drives and install two SATA 1.5TB drives? I do not want to use the PCI slots for a SCSI card and wire additional drives that way, because the transfer speed will be limited to 40mbps I believe. I have a Sonnet card a dual PPC 1,8Ghz card, a PCI USB 2.0 card and have other open PCI slots, but finally ran out of storage, and have a use for this machine to hold a LOT more. Other than the transfer speeds possible on SATA, are there any other differences between the original IDE (ATA) drives? Do they connect the same way?
View 9 Replies View RelatedI have used an optical caddy to fit a SSD into my macbook pro along with the existing 500GB hard drive. My next ambition is to fit 2 hard drives and a SSD inside the macbook pro. My questions are:
1) Can I use a Sata port doubler (Do they exist?) to run 2 hard drives through one sata port. (The bandwidth is there)
2) Failing the above can I use a cable linking a sata drive to the airport express slot? (is it PCI express?)
Looking for a good PCI (32 bit) esata controller card for my G5, im considering these two cards but dont wanna shell out the cash $110. I want a card that can handle more than 4 drives, RAID 0,1 and 5 compatible. [URL:...] The sonnett card is waaaaay to expensive... But, the Off brand card is more like what im looking for just needs to be $30 cheaper. PCI-X will work too, because its backward compatible with 32Bit PCI
View 3 Replies View RelatedI'm really interested in buying a 2 drive miniG FW800 enclosure for my powermac G4. I have two 400GB seagate 7200.8 drives that I want to use with this enclosure. The only thing stopping me from buying the miniG is that their site says that they don't support Seagate drives becuase they are too hot compared to other hard drives. Does anyone have a miniG with Seagates inside? I know the power supply is outside and it only has a small fan inside, I don't mind if the fan works harder or I'll even replace the fan with a better one if i have to. I just want this enclosure bad but can only have it with seagate drives since that's all I buy.
View 3 Replies View RelatedI have a Power Mac G5 2.3Ghz dual-core system (M9591LL/A) with 2.5GBs of RAM and an Nvidia 6600 PCIe graphics card with 256MBs of RAM.
I tried playing a full-screen HD episode of "The Office" on Hulu.com and it was extremely choppy (like 0.5fps). The sound was fine. It's still quite choppy (~2fps) in a normal browser window (not full-screen)
Is this normal? Does this video card not support it? What is the most powerful card that can be installed in this machine? I'm not opposed to buying a PC card and flashing the ROM if need-be.
I am buying a used Powermac, G5 Dual 2GHz. It already has a SATA 320GB HD in it but I want to use my SATA 160GB from my dead iMac. The only questions I have are:
1. Is there anything special I need to do installing the second SATA drive? Does the drive need to be set to Slave or Cable Select?
2. Because the 160GB (going to use for storing musc) drive has OS X Tger installed, will it be a problem when booting once I install both drives? The 320GB drive has Leopard (This will be my primary drive). Will it boot to Leopard and let me use disk utility for format the 160GB drive?
with the new MacBook Pros (13" and 15" only) concerning SATA II and third party drives in many forums, such as the Apple Support forum and the OCZ forum:[URL] [URL]As I understand it, the first mid 2009 MacBook Pros supported SATA I speeds only. After many user complaints, Apple addressed the issue with a firmware update, but it seems the MBPs hardware has a problem with full SATA II speeds since many users reported issues with 3rd party drives after the firmware update.
View 3 Replies View RelatedI see Seagate & WD have announced these but I'm struggling to find many available to order. Only the WD Green one appears to be even offered as an internal option. What is more it is more expensive buying the internal drive than buying the external USB one.
Has anyone bought one of these externals and stripped out the drive to put in their Mac Pro? I'm running out of space on my 1.5TB and swopping to 2TB hardly seems enough.
A buddy of mine has had a Power Mac G4 sitting around for a while now. I asked him about it, and he told me that I could have it if I wanted. He really only uses his MacBook Pro anyways. So, I get home, plug it all in, and nothing happens. I opened up the side and everything seems to be in place. There seem to be 2 hard drives, one which isn't screwed in. One of them isn't plugged in, I'm not too sure what that's about. Power supply is there, RAM is there. I don't know why it's not coming on. When I push the power button, a light on the front flashes for a second, but nothing happens. I know it needs a RAM upgrade, and probably a processor upgrade as well. However, first, I'd like to get it running first.
View 1 Replies View RelatedI have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?
View 10 Replies View RelatedI been searching the net for an answer but everything requires to buy something. I have my original hard drive of 140 GB and just bought a new one thats 1TB. I want to transfer my applications from the 140 to the 1TB. Is there a simple way of doing this.
View 7 Replies View RelatedI need to add another hard drive to my dads Dual 1.0 PowerMac G4. how large of a hard drive can i add easily to this machine? its running Tiger.
View 8 Replies View RelatedI'm a graphic designer but I don't know much about my computer's inner workings. I have a mirrored drive door dual 1Ghz G4. I have two SATA drives that were used in a Dell server on a RAID setup. They are Western Digital Caviar HDs, 250 GB apiece.
My question is: is there any way to install one of these drives in my computer?
Does anyone know if the internal SATA drives on the MacPros are hot swappable?
View 2 Replies View RelatedThe time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
This issue has been killing my work flow for quite awhile. I have a G5 dual 2.0. I can barely read or write files to an external hard drive. Say I try and copy 1.56GB of audio (12 files) from my external drive it will start to copy then stop at 500mb for minutes then start moving as normal and stop again around 900 for minutes.. then again at 1.4. This also happens when writing.
Here is the confusing part. This happens with two external drives (different models) with firewire 400, 800 and USB. I have reinstall OSx. I have repaired permissions and ran repair disc on everything. These hard drives work FLAWLESS with my Macbook Pro as well. Gr what can this be? It takes forever to copy data to or from a drive which is often how I transfer audio between my desktop and laptop. I should soon have Mac Pro money and this crappy G5 can go out the window. I am on 10.4..
Is possible to just swap the 500g hard drive into the G5 Power Tower instead of cloning the hard drive - Both PPC ?
View 4 Replies View Relatedare all hard drives compatible? i think so but i want to know for sure. i know apple has little things they do to make you buy apple stuff
View 2 Replies View RelatedI can't read any external hard drive on my laptop, but both mine and my friends smaller 250g WD HD were visible on his mac.
View 2 Replies View RelatedI may be coming across a Dual 1.8 G5 (M9454LL/A) and just wanted anyones opinion. I was wondering how expandable this thing is in terms of adding another internal hard drive...also are there any limitations this machine has in general (i already have an intel mac so this would be a second computer)?
View 7 Replies View RelatedI know some SATA II drives can be jumpered to be SATA I compatible. Would they be reliable in this application? I have an iMac G5 and I'd like to upgrade the internal HD.
View 3 Replies View RelatedDoes anyone know if the internal SATA drives on the MacPros are hot swappable?
View 3 Replies View RelatedJust wanted to confirm that the Seagate Sata 2 hard drives are compatible with the MacPro4,1 Quad-Core Intel Xeon. I'm looking to buy two Sata 2 drives. One drive as a data backup on the mac side, and one to backup Windows 7 (accessed with Bootcamp and Parallels 5) on the windows side.
View 1 Replies View RelatedIm having trouble understanding how to work this. I read the instructions up and down and it does not indicated anything what so ever. I just plugged in my second ATA hard drive into my mac g5(dual 2.5) I now want to copy everything on my original harddrive onto the harddrive I just put in. HOW? Everyone keeps telling put just click copy everything, and Im aware of that. But whhere do I copy it to? It says "New Disk Image or Choose Disk Image" I cant find my other hard drive in either of those options. My source disk is my original hard drive but I do not know how to target my new drive.
View 6 Replies View RelatedIs it possible to install 4 SATA drives into a G5 tower? I didn't open it up yet cause I have to move so much material to get to it. I'm assuming you can purchased a SATA PCI card but is there room in the case for 2 additional drives?
Information:
PowerMac G5