PowerPC :: RAID 0 On Dissimilar Hard Drives On G5?

May 2, 2010

I have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?

View 10 Replies


ADVERTISEMENT

Mac Pro :: RAID 1 For External Hard Drives?

Feb 2, 2009

I currently have a 2TB WD mirror edition that is setup in RAID 1 so it will mirror all my data. Now I also have a bunch of other drives laying around which I also feel the need to back up and currently I am doing this by doing a whole bunch of dragging and dropping and copying and pasting etc etc etc and this is making me very tired. I know that a setup is possible in disk utility but I am not at all sure about how to configure it so I wont lose any of my data.

Some details about my setup:
Mac OS X 10.5.6
PowerPc G5
Harddrives: two 1TB WD MyBooks, and two 500gig WD Mybooks --> these pairs need to mirror each other and make my life less of a hassle.

View 8 Replies View Related

Mac Pro :: Why Won't Boot Up With 3 RAID Hard Drives

Jun 4, 2012

So I have a Mac Pro with Bay 1 acting as my regular start up drive. I also have three other Western Digital 500GB hard drives that I have been using as a RAID backup system. However, when I place all three of the RAID hard drives into Bays 2, 3, and 4, the computer will not boot. It never reaches the Apple logo, and continually tries to restart. So I figured one of the hard drives was corrupt. 

However, I have tested all three hard drives in Bay 2 and the computer will boot just fine. I have also tested each bay individually (i.e. the same RAID hard drive in each of the Bays seperately) and the computer still boots fine. I can even power up with any two hard drives in Bays 2 and 3.  The only time I can't power up is when all three of the hard drives are occupying all three of the extra bays. 

Also, none of the RAID hard drives show up in Disk Utility or on the desktop. Shouldn't I be able to view them as normal internal or external hard drives being plugged into my Mac? They do show up in RAID Utility. Is this normal with RAID hard drives, or should they always show up in Disk Utility?   

I created a new RAID backup with two of the drives together (Bays 2 and 3) and it recognizes it in System profiler. However, I want to be able to use all three drives for the RAID.

Info:
Mac Pro, Mac OS X (10.6.8)

View 3 Replies View Related

OS X :: Using Two Hard Drives - Fastest RAID Type?

Mar 14, 2009

What is, in theory, the fastest raid type, when I use two hard drives.

View 3 Replies View Related

Mac Pro :: Temporarily Removing RAID Hard Drives

May 24, 2010

I have a Mac Pro with all hard drive slots filled. The first two disks (includes startup disk) are independent, and 3 and 4 are set up in a RAID 1 mirror. I have to take my computer into the Apple store for a repair and I'd like to just take out all the disks except for my startup disk... however I'm not sure how to go about doing so for the RAID. If I take the drives out, and boot up the computer with them no longer inside, will the computer "freak out" and/or will the computer no longer recognize the RAID if I put them back in again later?

If the latter is the case, will the data be lost or would I just have to set up the RAID again... and if I do that, will that also cause the data on the drives to be lost, or is it possible for it to mirror them again without needing to make changes to the data?

View 4 Replies View Related

Mac Pro :: Testing Hard Drives Before RAID Build?

Aug 15, 2010

What should I be doing to my drives before building arrays with them?

Hitachi do a Drive Fitness Test and Seagate something similar but I have not been able to get either to work on a BootCamp Windows partition.

I tried formatting in Disk Utility and pulling some data on and off. I'm now running a scan for bad blocks in Drive Genius (is this worth it? It's going to take about a week at this rate). Anything else I should do?

View 2 Replies View Related

MacBook Pro :: 2010 MBP Can Take 2 7200 Rpm Hard Drives And Raid 0?

May 3, 2010

I have been reading about people taking a SSD drive for Boot and OS and using a second HD for their data using MCE's Optibay hard drive enclosure.

I would love to go this way but I can't justify spending all the cash on a SSD yet. Could I put in 2 500GB 7200 rpm drives and RAID 0 them? I know this wont be as fast as SSD but it should be faster than a single hard drive and hold a lot more storage for less $$$.

View 1 Replies View Related

PowerPC :: What Step To Take Raid Two 300gb Drives And Move Everything Back

Nov 9, 2006

i am considering running a Raid 0 configuration on my Powermac 2x300gb drives. Right now i have duplicated everything onto a 250gb drive and have successfully booted with this drive. Does anybody know what steps i need to talk to Raid the two 300gb drives and move everything back onto them?

View 3 Replies View Related

Mac Pro :: Setting Up Raid On New Hard Drives / Requires Bios Setup?

Nov 21, 2008

I'm thinking about getting a Mac Pro tower from apple, and then buying two 500gb hard drives to place them in a raid 0 config. My question is, is setting up raid as easy as taking out the existing hard drive, placing both the new drives into the mac pro, and selecting raid 0 from OSX when I reinstall the operating system?? Or does the Mac have something similar to a Bios setup where I select that?

View 24 Replies View Related

Mac Pro :: Multiple Hard Drives Boot Drive & Internal Raid

Jul 11, 2009

I just got a used mac pro quad. I plan to use it for video production- final cut pro, pics - aperture, and music production- protools. THe computer came with 3 - 10k rpm 160g hd's. Two of them are set up as a raid 0. I like the idea of having a faster drive as a boot drive, but 160 seems kind of small to me as the drive to run memory hungry apps and the operating system. Am I right? I could go to a 300g 10k rpm drive. I am also thinking about getting a bigger drive, say a 750g or 1 tb 7200 rpm. Should I use this as the boot drive or as a secondary storage drive?. If it's the boot drive should I add the other 160g 10k drive to the raid or keep it separate? I assume that neither way would be wrong, nor create a problem, but since I haven't put anything on it yet, I'm wondering what would be the most efficient way to manage my files and get the most out of my computer.

View 16 Replies View Related

Mac Pro :: Unable To Mount RAID External Hard Drives Since Upgrading To OS X 10.7.4

May 21, 2012

Since upgrading to Mac OS X 10.7.4 I am unable to mount any of my G-Tech Raid hard drives.

Info:
iMac, Mac OS X (10.7.4)

View 1 Replies View Related

Mac Pro :: Get A Highpoint Raid Controller And Put Those 4 Drives In A Raid 5 Array?

May 1, 2008

I have a macpro with 4 x 1tb drives

Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?

Lastly, are the highpoint 3500 series a decent card? and fully compatible?

View 3 Replies View Related

PowerPC :: Internal RAID Card To Create RAID 1 Mirror Of System Drive For G5

May 16, 2007

I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.

View 2 Replies View Related

PowerPC :: G5 Support For SATA 300 Hard Drives?

Oct 27, 2006

I was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?

View 1 Replies View Related

PowerPC :: Two Hard Drives On G4 But Not Plugged / Screwed In

Dec 9, 2007

A buddy of mine has had a Power Mac G4 sitting around for a while now. I asked him about it, and he told me that I could have it if I wanted. He really only uses his MacBook Pro anyways. So, I get home, plug it all in, and nothing happens. I opened up the side and everything seems to be in place. There seem to be 2 hard drives, one which isn't screwed in. One of them isn't plugged in, I'm not too sure what that's about. Power supply is there, RAM is there. I don't know why it's not coming on. When I push the power button, a light on the front flashes for a second, but nothing happens. I know it needs a RAM upgrade, and probably a processor upgrade as well. However, first, I'd like to get it running first.

View 1 Replies View Related

PowerPC :: Transferring Applications To New Hard Drives

May 26, 2010

I been searching the net for an answer but everything requires to buy something. I have my original hard drive of 140 GB and just bought a new one thats 1TB. I want to transfer my applications from the 140 to the 1TB. Is there a simple way of doing this.

View 7 Replies View Related

PowerPC :: Hard To Read / Write To External Drives With G5

Sep 17, 2007

This issue has been killing my work flow for quite awhile. I have a G5 dual 2.0. I can barely read or write files to an external hard drive. Say I try and copy 1.56GB of audio (12 files) from my external drive it will start to copy then stop at 500mb for minutes then start moving as normal and stop again around 900 for minutes.. then again at 1.4. This also happens when writing.

Here is the confusing part. This happens with two external drives (different models) with firewire 400, 800 and USB. I have reinstall OSx. I have repaired permissions and ran repair disc on everything. These hard drives work FLAWLESS with my Macbook Pro as well. Gr what can this be? It takes forever to copy data to or from a drive which is often how I transfer audio between my desktop and laptop. I should soon have Mac Pro money and this crappy G5 can go out the window. I am on 10.4..

View 7 Replies View Related

PowerPC :: Possible To Swap Hard Drives - G5 To G5 Power Tower

Oct 17, 2008

Is possible to just swap the 500g hard drive into the G5 Power Tower instead of cloning the hard drive - Both PPC ?

View 4 Replies View Related

PowerPC :: Does All Hard Drives Compatible With Grape Imac G3

Oct 22, 2008

are all hard drives compatible? i think so but i want to know for sure. i know apple has little things they do to make you buy apple stuff

View 2 Replies View Related

PowerPC :: Dual 2.0 Ghz G5 Support Sata 300 Hard Drives?

Jun 29, 2009

i was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?

View 11 Replies View Related

PowerPC :: Unable To Read External Hard Drives

Mar 11, 2010

I can't read any external hard drive on my laptop, but both mine and my friends smaller 250g WD HD were visible on his mac.

View 2 Replies View Related

Mac Pro :: How To Run 4 1.5TB SATA Drives In A RAID 5 Or 10

Jan 18, 2009

The time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...

Which RAID cards are bootable?

Do any work like the Apple card and interface with the drives through the logic board?

If not, how do you connect the internal drives to the RAID card in their stock bay locations?

View 24 Replies View Related

Mac Pro :: Setup RAID 1 Using Two Drives

Jul 1, 2009

I just got a brand new MAC PRO desktop. It came with a 600GB HDD. I purchased a second identical internal 600GB HDD. I wanted to do setup a RAID 1 using these 2 drives. Currently the main drive has the OS and all my other apps installed. I installed the 2nd drive and was fooling with disk utility. I'm not sure how to set this up however. I tried numerous guides online but I just cant figure it out.

MAC PRO (takes up to 4 internal drives) - currently installed 2 identical drives
Leopard
Using Disk utility

The RAID tab says "online" and the status is green (indicating the RAID is working). However on my desktop i see the 2nd hardddrive mounted with no contents in it. I just want to able to use the 2nd drive as a mirror so this way if one fails I'm still up and running.

View 15 Replies View Related

Mac Pro :: New RAID CARD Cannot Detect SAS Drives

Oct 1, 2008

I just got the apple mac pro raid card today, but after I connect it and all 4 SAS drives, the MAC OSX Installtion program can not detect the SAS at all, I open the RAID Utility but no dirve there, the battery is in charging status.

View 2 Replies View Related

Mac Pro :: Possible To Migrate RAID To Larger Drives?

Apr 2, 2009

I'm about to configure my 2006 MP with one of Apple's RAID cards using RAID5. I currently have 4x 750GB drives that I can use, but I can see needing more space in the not too distant future. When I do need more space, can I simply drop in a 2TB drive, let the RAID system reconfigure itself, and repeat this until I have all 4 drives in place? Is there a better or different way to do this? I know that if one of the drives is larger than the others, then only a drive space equivalent to the smaller drives will be used in RAID5. After addition of the fourth drive (per the above scheme), will the array then use the full 2TB of each drive?

View 7 Replies View Related

Mac Pro :: Protecting 4xWD640 RAID 0 With External Drives?

Mar 26, 2008

I have a 8-core MP 2.8Ghz with 10gb ram and Ati 2600HD. I'll someday replace the ATI with a quadro (all my application is 3d/CAD/Design) I'm installing 4 of the WD640 drives, they arrive on Friday.

I would love to order the CalDigit RAID card but after searching I finally figured out it's not available until next month.

That said, I need my system to start working ASAP and I don't want to wait if I don't have to.

I'm a designer, I need fast scratch so some striping needs to be involved. I also need data protection. At this capacity Time Machine isn't going to be of any use and I'd prefer redundancy anyway.

The 4 WD640s are replacing: 1 750gb 7200.11, 2 WD SE16 500GBs, and 1 320GB (Apple Stock Drive).

I would like to sell some of those drives to defray the cost of this endeavor but I'm open to keeping 1 or possibly 2 as external drives or stuffing one into the optical bay with a converter.

I want speed and reliability, of course! But really the largest motivator here is the combined drive aspect. Having so many volumes is driving me nuts.

My intention had been RAID 5 or 6 but I now know that Apple Software RAID can't do this. So now it seems with software RAID 0+1 would be the only option.

Realistically, does the cpu performance degradation outweight the speed gained from striping the drives? It's so difficult to determine bottlenecks.

Any thoughts on my best bet without/before the RAID card arrives. Can I migrate the array after installing the card without data loss?

If I just JBOD the drives can the concatenated set be broken up ever? I was thinking I could JBOD until the card came.

View 7 Replies View Related

Hardware :: 2 USB Drives Attached To TC In RAID Configuration

Sep 29, 2008

Anyone know if it's possible to attach two USB hard drives to a Time Capsule via a USB hub, and configure them in a RAID1 configuration and use them as my Time Machine backup disk? I would then use the TCs internal drive as network storage.

View 7 Replies View Related

Mac Pro :: File Server With Five Drives In RAID Array

Nov 19, 2008

I have a bunch of Mac Computers here and I want to make a file server for them with about 5 drives in an RAID array to be a little bit secure. I am fairly certain how to go about and build myself a basic file server for a bunch of PCs networked together, but I am not sure about how to do it for a network of Macs.

View 1 Replies View Related

Mac Pro :: RAID Controller And Connecting Two Drives For Windows

May 31, 2009

Can I install a Raid Controller and connect say two drives to it, specially for windows? Will it be bootable? Or perhaps even connect the iPass of the four internal bays to an Adaptec 5405 and get a separate cable for my Mac Drive. Will both be bootable? What if I just want to boot Windows for now? I sometimes need to convert my early 2008 Mac Pro into a rather beefy Windows workstation and the lack of HW Raid is rather irritating.

View 1 Replies View Related

Power Mac G5 :: Internal Drives For RAID 0 Startup Disk

Dec 7, 2007

Thinking of using 500GB and 750GB internal drives for a raid 0 startup disc (software raid obviously)?

Information:
Dual 2.5 G5
Mac OS X (10.4.11)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved