PowerPC :: Arm For Wall Mounting IMac G5
Aug 7, 2009[URL]. I found the bracket now can someone recommend me an arm that I could have on my wall that is compatible and also is available in the UK.
View 1 Replies[URL]. I found the bracket now can someone recommend me an arm that I could have on my wall that is compatible and also is available in the UK.
View 1 RepliesI just got my new ACD; and after about 10 mins, I seem to have killed it. I bought the VESA wall mount with it, and started attaching it.
As soon I had removed the stand, the block that comes out of the ACD so you could attach the mounting plate to it dropped into the display, and the lever doesn't allow me to pull it back out again....
So basically I cannot put the wall mount on, and I can't put the stand back on either (because I would need that block to attach one of them onto)...
Would Apple exchange it for me if I called Online Sales or should I contact AppleCare?
Is there a way to prevent the PB from going to sleep after the wall charger is unplugged when using the clamshell mode? I'm going to use my PB as a carputer and want it to run for awhile after I turn off the car..I know the PB will go to sleep when it loses power in clamshell mode..
View 3 Replies View RelatedAll the iMac mounts I find have arms and such. What about a mount that mounts flat against the wall like flat tv's? I can't find any searching...
View 3 Replies View Relatedthe original optical drive in my G4 had been dying for a while - it would only respond to "eject" commands if there was a disc in the drive. If I inadvertently closed the drive without a disc, it would refuse to eject. It tried. It made a little motor sound, like it was trying to eject, then it gave up with an even smaller motor sound.
View 3 Replies View RelatedMy hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
G4 IMac, 10.4. I have a simpletech 1 tbite hard drive that does not mount almost always on my machine. I just brought it home from a friends where it does show up instantly. Ran disc utility for permissions on my imac, swapped cords. Power on before boot up, power on after, unplug firewire, etc., nothing works. I want to install OS X 10.4 on the drive to try & boot up my powerbook (panic kernel message there).
View 1 Replies View RelatedI want to buy the 27" iMac, but for various reasons - most importantly height - I need to have it hang off a Vesa mount arm that will swing over my desk. Unfortunately, I need the screen to be fairly low, and the iMac stand would be in the way. MY QUESTION: is the stand on the iMac detachable, or not? When you mount it, do you simply have the stand hang below... seems ugly. Also, what is a good arm that would attach to a wall and extend at least 3 feet? TIA!
View 9 Replies View RelatedMy first post and am gutted to say I have a tech problem! I put a cd-rom into my iMac the other day and it didn't mount (ie no little disc symbol on the screen) and I can't eject it. I can hear the disc drive constantly trying to read the disc and then trying to eject it. It is as if the disc is slightly blocked as it tries to eject but then gives up and sucks it back into the drive and tries (unsuccessfully) to read it.any ideas anyone? I am a techno-plonker so please offer advice in simple terms!!
View 2 Replies View RelatedG5 iMac model A1058, 1.8/512mb/160gb.Bought this machine used on e-bay with no operating system, powers on fine, flashing folder with question mark= no operating system. Tried to connect to my i-book in target disk mode via fire wire and the hard drive does not mount on the desktop. Can't find it in disk utilities however i get this in system profiler under firewire.
View 15 Replies View RelatedI was just wondering if anyone else noticed this. I notice this everytime I minimize a window. When my MBP is plugged to the wall, and I minimize a window, the animation is very smooth, but when it is unplugged, just using the battery power, it is still smooth, but not as smooth.
View 6 Replies View RelatedIs the iPod�s wall charger compatible with the iPhone? I�m talking about this one:
[URL]
I�m wondering because I�m going abroad, and the iPhone�s charger that plugs into the wall isn�t compatible with the world travel adapters.
Does anyone have a good picture comparing the two?
I found one on a review, but I can't seem to find the link.
Is just bought a Macbook Pro on Craigslist; it came with the square, white wall charger. The problem is, when I plug the charger into an outlet, it falls out. I've had to literally tape the charger to the wall to keep it in the outlet.
View 8 Replies View RelatedWhat do you guys think of wall-mount your Mac Mini behind a wall-mounted monitor? I've done it. It's pretty neat and clean look. Check out: Before I put my Mini on top the shelf:and after here is the Mini:
View 3 Replies View RelatedI have a G4 dual 1.25 tower. Doesn't start when I push the start button on the monitor or the front of the box. If I unplug it from the wall and plug it back in once or twice it starts. I've replaced the battery and makes no difference.
View 6 Replies View RelatedAfter update to 10.7.4, My macbook pro cannot sleep when using wall power. Using battery everything is OK.
Info:
MacBook Pro, Mac OS X (10.7.4), Sleep
I have a PowerMac G5 with the first motherboard that is out of order, and another PowerMac
G5 Late 2005
with 2x2.0GHZ
Mounting the powersupply from the 2004 on the 2005 is the powersuply compatible or not?
EDIT: I looked on Mactracker and compared the two:
Max Watts in the first is 604W and 450W on the late 2005.
I want to put a powersuply from a G5 2004 (604W ) on a G5 2005 that had a 450W powersuply is this possible ?
In Firefox and Minefield I am able to post on peoples walls, but often I am unable to load their profiles well. In Safari, I am able to get to Facebook profiles, but when the profile is fully loaded, and I click in the area marked for writing on the "Wall" my text is grey, as it was when the profile first loaded and Facebook alerted me where I can write. When I click post, Facebook does not recognize that anything has been written, and will not post the text.
View 2 Replies View RelatedI have the latest MacBook Pro (see sig) and for some reason when i try to record a video on someones facebook wall or in a message, the camera will turn on for a second then turn off and facebook says "look for camera again" and it never works. When i right click on the video box and go to flash settings, its set to USB for webcam and when i double click to check it in settings it'll show me (meaning the camera is working from the usb setting), but when i go back to the facebook video box my camera will never turn on. anyone have a fix for this? All other macs i've used have done this just fine.
View 1 Replies View RelatedHow do I project images or videos from my Mac Pro to a wall, or screen?
View 2 Replies View RelatedAre there any wall mounts or stands for the AirPort Express? I only found ones for the Extreme and Time Capsule. I did find this but the product is discontinued.
View 4 Replies View RelatedThe battery says it is at 99% charge but the computer shuts down when I unplug the power cord.
Info:MacBook, Mac OS X (10.6.7)
Anyone know of software that looks like a Yearly planner. You know, like a each month of the year mapped out and you can colour them differently or block out certain weeks to signify something important. I know I can use ical but I want to be able to block out things and see the year at a glance.
View 2 Replies View RelatedI made this for Snow Leopard, just a quickie. I think it looks pretty nice.
2560 נ1600 pixels
300 DPI
I can sacrifice a bit of bandwidth for you all. [URL]
I'm in the market for a 100mm VESA Desk/Wall Mount that's suitable for the 30" Apple Cinema Display. I already have the sub-assembly, just missing the actual fixture.
To be completely honest, I've looked at a few but I'm not completely sure what weight capacity I should be looking for. I can tell you one thing, the 30" ACD ain't a light mother, it's actually quite heavy, perhaps it's due to the Alu shell?
I wonder are there many people out there who might be using those? If your using one, either at work or in the home, would you mind posting your model and personal rating?
Ive been looking everywhere and I cant seem to find anything that would work. I am in need of a wall mount for a 22" cinema display.
When I depress the center of my mouse to access the calcualtor, I cannot see the documents open on my desktop. With Snow Leopard and Tiger, I could see the documents, so I could actually input the figures I am trying to calculate. Now, some weird lego-type wall paper appears as the background. I see my widgets, but not the docs currently open.
Info:
iPhone 3GS, iOS 5.1, iMac Intel Core 2 Duo, iCloud
i have just a plain macbook not pro or air just a Macbook and its white. Well i need to turn my fire wall off for some thing for like 2 secounds then back on but i go into system preferances and there is no option for security and privacy which is were the turn On/Off firewall is its just not there for some reason please help me...Im on Mac OS X (10.7.3) system help
Info:
MacBook, Mac OS X (10.7.3), Thats all
On the advice of various forum members, I recently upgraded my 2008 Mac Pro to 12 GB of RAM (from 4 GB), in order to solve an issue I was having with Logic. Unfortunately the issue is still present and I am wondering what to do as I've already blown my budget to fix it. I'm hoping someone here can help.
I use the Vienna Symphonic Library through ESX24 in Logic 9, on a 2008 Mac Pro (2.8 Ghz octocore). When I attempt to play back some of my compositions, Logic hits a wall with certain sections, indicating "System Overload. The audio engine was not able to process all required data in time. (-10011)" I did check System Profiler, and all the RAM is being recognized.Is there any way to solve this without new hardware? As a side note, I was wondering how I can add more than 255 ESX24 tracks as Logic seems to cap out at that. Please let me know anything I can try.