Just realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows
View 5 RepliesJust realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work [URL] but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows, but im hoping for a miracle hear. Also the box says its 4x and 8x compatible.
View 7 Replies View RelatedI'm searching for upgrade video cards for my dual 533Mhz digital audio G4 PM. I've noticed that there are several sellers on eBay selling ATI Radeon 9600's and claim they work on PM G5's as well as PM G4's. [URL]. Could these cards just be stock Apple cards pulled from a G5 that happen to work in a G4, or are they altered or flashed PC cards that work on G5's and G4's. Is it common knowledge that you can pull a 9600 out of a stock G5 and use it in a G4?
View 8 Replies View RelatedI got an ATI Radeon 9600 Pro All-in-wonder in a box of computer junk. Actually, besides a stick of PC3-6400 memory, it was the only thing that wasn't just an empty box or instruction manual
View 3 Replies View RelatedI picked up a new ATI Radeon 9600 Pro for my PowerMAC G5 D2.3 to run my 30" ACD.
I was going over the installation booklet and its all in PC lingo.
I recently purchased a 30" apple monitor to be used in tandem with my 23" cinema monitor. The card that was shipped with my G5 twin 2.5 GZ will not support the 30" as it lacks dual link dvi. Hence the 9600 pro for Mac & PC card. The problem is this...The screens light up at start up but the computer crashes before the boot sequence completes. I took the card to the apple service center where I bought it and it worked fine on both their G4 and G5 machines running Tiger. I cant make it work on mine in Tiger or Leopard.
Information:
G5 twin 2.5
Mac OS X (10.5)
2 drives 750 gig 400 gig
I have a Quicksilver mac will a ATI RADEON 9600 PRO 4x/8x AGP 256MB Dual DVI Video Card - For Mac run any modren game?
View 4 Replies View RelatedI've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
View 26 Replies View RelatedI have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
View 2 Replies View Relatedi have a new mid-2010 i5 iMac with a radeon 5750 processor, and would like to run linux on it, however, ubuntu 10.10 isn't working, i get through the whole install, and restart, and it won't boot. i've installed rEFIt, and it shows up as installed on the drive, but won't boot to anything but black with a flashing white line on the top left. known compatible working version?
View 1 Replies View RelatedI have a 64MB ATI graphics card and can't get the screen resolution I want. It was fine and I had it set to how I like, until I plugged in an S-video cable to my T.V then all the settings changed and now I can't get back to the resolution I had before. I unplugged the cable and tried to change them but still no luck. When I select the desired resolution it makes the screen tiny in the middle of the monitor. The resolution is fine on the T.V. I have a real pet hate of low screen resolutions which is all I can use at the moment. I bought the card on ebay but think it is a PC "flashed" to MAC as the factory drivers CD is PC and MAC drivers are on a cd-r. Is there any way I can clear the memory of the card or the files that the card uses so I can "restore" it to how it was before I connected the s-video. It also asked me in the ATI app (the first time I opened it with the T.V connected) if I wanted to have the connection to the T.V as always on. I removed the app and reinstalled but it seems to have remembered the settings and doesn't ask this again. Is there any way to change it back so it doesn't remember?
View 3 Replies View RelatedI would like to ask you people is there any chance that I can install Radeon HD 4850 512 MB into power mac g5 late 2005 ? actually this one :
View 5 Replies View RelatedCan someone tell me if I could put a ATI Radeon X1650 Pro graphics card in a 800 MHz PowerMac? I know that the PowerMac uses AGP, and that card is agp, so will it work? If it doesent, could you point me out to some cards that will?
View 2 Replies View RelatedWhy is the ati rage 128 pro faster in openGL and other results than a radeon 9000 pro?Results on Xbench:Rage 128 pro: 61,45 fpsRadeon 9000 pro: 43.47 fpsmy powermac g4 is a digital audio (2001 graphite model) 768MB ram (3X256)66mhz with 1mb L2 cache at ? speedLatest tiger version
View 1 Replies View RelatedI'm looking to use a webcam for my Powerbook G4. I have an EyeToy usb camera but I can't seem to get that to work for any of my programs such as iMovie 09 and other iLife applications. I either want to know where I can get a camera that will work with this computer (That isn't very expensive) or how I can get my eye toy to work with everything.
View 16 Replies View RelatedI've been given a PowerBook G3. I'm not sure which version it is or anything. But its a PowerBook G3 because it says on the screen. How do I find out exactly what machine I've been given and what wireless card to have a look for. I wouldn't mind spending a couple of quid on ebay for an old second hand airport card just for fun really. Its got os9 on atm. I've got an old osx10.1 disk somewhere I might try and update it a little.
View 2 Replies View RelatedI found this one I guess it works with my G3 Clamshell right?
http://www.amazon.com/80GB-ATA-6-2-5...4?ie=UTF8&s=pc
I don't want something over 60-70$ thats my max. I also found this Maxtor
http://www.amazon.com/Maxtor-Diamond...4?ie=UTF8&s=pc
Its much cheaper than the Fujitsu(above) but am not sure if it works or not. Idon't know whats the buffer for when it comes to HD's and also the pin?
I have a G4 14-inch iBook. Does anyone know if I'll be able to upgrade to Leopard when its released?
View 3 Replies View RelatedI have two Macs right now - an iBook and a new MacBook. I bought two Kingston 1GB RAM slots and put them in my MacBook and they're working great. Now I have two 512MB RAM slots that I'm not using.
My iBook has one free slot, so my question is this: can the RAM I took from the MacBook work in the iBook? I don't have the iBook around for the time being (it's at a friend's place), so I can't check it myself.
I'm going to sell the iBook, so I thought it would be nice if it had some more memory.
I was just using my laptop, and I got up for a few minutes, and then heard a weird crunch. I came back to see a quarter-size black spot with at least 3 cracks in it. There are also vertical lines, and a white section at the bottom. Is this a normal thing, or is my iBook trying to kill me or something? Also, I bought a G3 ibook a few days ago, but it hasn't came in yet. Does anyone know if its lcd will be compatible? Right now, I just hope the G3 ibook comes tomorrow because I am going on vacation and have a science project to work on. Also, if the G3 lcd won't work, then what will? [URL]...
View 20 Replies View RelatedCan you hook up any compatible LCD peripheral to a G3 ibook?
View 1 Replies View Relatedi want cheap ddr pc3200 ram for my g5i mean cheap price not quality i want to know of more generic pc ram that wont give me issues with the g5 so i can do more shopping around and get the best price possiblehave people had any luck with crucial rendition or kingston valueram and other cheap types of ram if so
View 12 Replies View RelatedAs the title says, will the new airport extreme card with 802.11n work in an old iMac G3 capable of adding an airport card? I know I need the card adaptor, but does this new one work fine, or do I need to buy an older version? Also, which old macs would have compatible airport cards?
View 4 Replies View RelatedIs this hard drive going to work as an extra drive in a: Power Mac G5 Power PC G5 (2.2) existing ram 2x512MB PC3200U-30330 Western Digital Caviar (WD5000AAKS) 500GB SATAII 7200RPM 16MB Buffer (OEM)
View 4 Replies View RelatedApple is slowly dropping PowerPC compatibility with its latest software releases as evidenced by a major new feature of iLife '09 that will function only on Intel-based Macs.
Ars Technica points out that GarageBand's Learn to Play, a new section within the music-making software that serves as a digital instructor for a user learning a new instrument, is not officially supported for Macs still running on PowerPC processors.
System requirements found on the Apple Store website say, in fine print, "GarageBand Learn to Play requires an Intel-based Mac with a dual-core processor or better."
When iLife '09 was first announced at last month's Macworld, the system requirements included "a Power PC G5 or 867 MHz or faster PowerPC G4" without mentioning any incompatible individual features.
Learn to Play also offers Artist Lessons from a Lesson Store built into GarageBand where artists teach fans how to play their hit songs on certain instruments for $4.99 each lesson.
Chief executive Steve Jobs confirmed the switch from PowerPC to Intel in June 2005, targeting the end of 2007 for the transition to be completed.
Mac OS X Leopard excluded slower PowerPC-based Macs with a cutoff set at 800 MHz G4 or faster.
Official documentation from Apple gives clues that PowerPC Macs very well may be left out completely when Mac OS X 10.6 Snow Leopard is released sometime during the first half of this year. Developer copies distributed at WWDC last year included a requirements PDF that listed "an Intel processor" as the minimum necessary to run the software.
Adding further weight to that possibility, people familiar with the ongoing development of Leopard have previously told AppleInsider that Snow Leopard would in all likelihood exclude support for PowerPC processors.[ View this article at [URL] ]
I have a 1.67 Ghz, 1gb ram 15inch powerbook. I need a new mains power adaptor as mine is pretty well had it. I've looked around on the web and am not sure if I need a 45watt or 65 watt adaptor. Does it make a difference? I'm based in the UK.
View 3 Replies View Relatedare all hard drives compatible? i think so but i want to know for sure. i know apple has little things they do to make you buy apple stuff
View 2 Replies View RelatedI have a Power Mac G4 AGP Machine and if there are any sound cards with an optical out that is compatible with my machine.
View 1 Replies View RelatedLooking for a good PCI (32 bit) esata controller card for my G5, im considering these two cards but dont wanna shell out the cash $110. I want a card that can handle more than 4 drives, RAID 0,1 and 5 compatible. [URL:...] The sonnett card is waaaaay to expensive... But, the Off brand card is more like what im looking for just needs to be $30 cheaper. PCI-X will work too, because its backward compatible with 32Bit PCI
View 3 Replies View RelatedIs there a site, preferably independant, which lists compatible hard drives for Mac laptops?
Also, if I buy an external enclosure, can I clone my current hard drive to it, with partitions and all, and have the Mac-store just stick it in without having to re-install Tiger?
