Power Mac G5 :: ATI Radeon 9600 Causes Crash On Start Up?

Nov 18, 2007

I recently purchased a 30" apple monitor to be used in tandem with my 23" cinema monitor. The card that was shipped with my G5 twin 2.5 GZ will not support the 30" as it lacks dual link dvi. Hence the 9600 pro for Mac & PC card. The problem is this...The screens light up at start up but the computer crashes before the boot sequence completes. I took the card to the apple service center where I bought it and it worked fine on both their G4 and G5 machines running Tiger. I cant make it work on mine in Tiger or Leopard.

Information:
G5 twin 2.5
Mac OS X (10.5)
2 drives 750 gig 400 gig

View 2 Replies


ADVERTISEMENT

Power Mac G5 :: Can I Install A Radeon 9600 Pro?

Dec 15, 2007

I picked up a new ATI Radeon 9600 Pro for my PowerMAC G5 D2.3 to run my 30" ACD.
I was going over the installation booklet and its all in PC lingo.

View 4 Replies View Related

Power Mac G5 :: Radeon 9600 Pro - Quartz Extreme Not Supported

Oct 15, 2007

I've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.

View 26 Replies View Related

Power Mac G5 :: How Do I Connect A Second Cinema Display To A Radeon 9600 PRO Card

Dec 4, 2007

I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?

View 2 Replies View Related

Mac Pro :: ATI Radeon 9600 Pro All-in-Wonder

Mar 1, 2010

I got an ATI Radeon 9600 Pro All-in-wonder in a box of computer junk. Actually, besides a stick of PC3-6400 memory, it was the only thing that wasn't just an empty box or instruction manual

View 3 Replies View Related

PowerPC :: G5 Radeon 9600 In G4 PM?

Apr 17, 2007

I'm searching for upgrade video cards for my dual 533Mhz digital audio G4 PM. I've noticed that there are several sellers on eBay selling ATI Radeon 9600's and claim they work on PM G5's as well as PM G4's. [URL]. Could these cards just be stock Apple cards pulled from a G5 that happen to work in a G4, or are they altered or flashed PC cards that work on G5's and G4's. Is it common knowledge that you can pull a 9600 out of a stock G5 and use it in a G4?

View 8 Replies View Related

PowerPC :: ATI Radeon 9600 XT 128 Mb Compatible With G4?

Aug 26, 2008

Just realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows

View 5 Replies View Related

PowerPC :: ATI Radeon 9600 XT Compatible With G4 MDD?

Aug 27, 2008

Just realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work [URL] but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows, but im hoping for a miracle hear. Also the box says its 4x and 8x compatible.

View 7 Replies View Related

Mac Pro :: ATI RADEON 9600 PRO Run Cysis Or Any Modern Game?

Aug 7, 2008

I have a Quicksilver mac will a ATI RADEON 9600 PRO 4x/8x AGP 256MB Dual DVI Video Card - For Mac run any modren game?

View 4 Replies View Related

Power Mac G5 :: 9600 Nvida And A 23in Apple Display With No Video At All?

Oct 30, 2007

I have a PM Dua 2.0 G5, 9600 nvida and a 23in apple display with no video at all. When i turn on the comp i get no video, i see my cpu blinking 3 times then a 5 sec pause. I have tired taking out the video card and re-seat it as well as the ram, i switch it (rotate it) and reset the PMU button, still no video

Information:
G5 Dual 2.0 1 GB
Mac OS X (10.4.10)

View 1 Replies View Related

Mac Pro :: Radeon 4850 Power Connectors?

Aug 10, 2008

I have bought a Radeon 4850 graphics card to play some games in Windows under boot camp. The card comes with a mini 6 pin power connector that connects to the graphics card and supplied lead has at the other end a 4 pin power connector to go into the computer's power supply by the looks of the diagram in the box. My question is do I need to connect this to the Mac Pro power supply? The ATI 2600 card in the machine doesn't look like it connects to another power supply.

If I do need to use this then I can only see two small power connectors on the motherboard near the fan, does anyone know anywhere in the UK that would sell a compatible power lead?

View 12 Replies View Related

Power Mac :: ATI Radeon X1900 G5 Mac Edition Misbehaving?

Mar 15, 2012

I recently posted a question regarding an Apple DVI-ADC converter/adapter. It appeared the adapter wasn't working until I found out my ATI Radeon X1900 G5 Mac Edition, (which I just installeld), isn't functioning properly. In this screen shot you'll see the resolution is stuck at one setting with no options:

[URL]

And in this screen shot I was reminded about a problem with the data displayed in the system profile:[URL]However, the data/description error is not my main concern. I'm wondering if I need to download this driver to correct the card's malfunction?

[URL]

I was keeping this card as a spare, (since they're rare as gold). BTW, when I put the stock OEM GeForce 6600LE 128MB PCIe back in, I was able to adjust the screen resolutions for both a 20" Cinema Display, and a 17" LCD Studio Display, and got the DVI-ADC adapter to work. 

View 10 Replies View Related

Intel Mac :: Don't Want All Programs To Start Up Again After A Crash

Mar 13, 2012

Sometimes when I my computer shuts down unexpectedly, then I start up again, all the programs I had open previously open again automatically. How do I set my prefs so it won't do that?

Info:
iMac 27, Mac OS X (10.7.2)

View 3 Replies View Related

MacBook Pro :: Video Card Crash - Can't Start PC?

Jul 13, 2010

Alright so I get to class, open up my 2010 Macbook Pro 15'(fully loaded). I close VLC to save on battery life and then I end up with the screen in the pictures below. I forced restart, and same problem. My guess is that when I closed VLC it turned back to the Integrated Video Card. Now I can't start the computer. What does everyone think? I'm most likely taking to Apple Store tonight. How long does it normally take Apple to fix issues like this? [URL:...]

View 4 Replies View Related

Power Mac G5 :: CPU Died - Software Crash?

Dec 25, 2007

I was watching a movie, went to research something the movie inspired me about and I noticed that CPU1 was showing 75% load and CPU2 was showing 0% load and by the CPU graphs had been for about a minute. About 10 seconds later the computer locked up and I was forced to hold the power button to shut it down. I restarted and It's been running normal for the last half hour. Is this something I should look into or maybe just a software crash?

View 1 Replies View Related

Aperture :: Doesn't Start - Opens A Crash Report Window

Jun 28, 2014

It just opens a crash report window. I am using Aperture 3.5.1 on OS X 10.9.3.

View 5 Replies View Related

Power Mac :: Adobe Photoshop CS2 Crash Every Time Launched Has A KERN_INVALID_ADDRESS?

Jun 14, 2012

I have 2 Macs the first is a MacBook where I have a license for Adobe CS2 and Photoshop began to close every time that I tried to use.So I installed a new system on a Power MAc G5 and import my apps from the MacBook and the problem still there. erase all adobe programs, the library, preferences, apps, shut down computer and next day install a new adobe CS2 from scratch... And the problem still there.  

[code]...

Info:
PowerMac, Mac OS X (10.5.8)

View 6 Replies View Related

Power Mac G5 :: Fatal Hardware Error To Disk Utility / Repaired System After Crash

Dec 30, 2007

Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.

Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.

Information:
G5
Mac OS X (10.4.11)

View 3 Replies View Related

OS X V10.5 Leopard :: Power PC Apps Crash On Startup In OS 10.5.8 Leopard

Apr 1, 2012

I've been reading a great deal in this forum regarding the issue in the subject line of this post.  But it all has to do with 10.6.8 Snow Leopard.  My 10.5.8 on my system has not been updated in any way for a while.  So how is it that in the last couple of weeks all of my Power PC apps still on board, are going through this crash on start up routine. If I select 'relaunch' from the dialogue window that pops up upon the intial crash, the app will run fairly normally.  This can't be about a security update like with Snow Leopard.

Info:Mac Pro Quad Core Intel Xeon / Macbook 2.4GHz, Mac OS X (10.5.8)

View 9 Replies View Related

Power Mac :: G5 2.0 DP Won't Start

Feb 16, 2012

Ok, I know I've had 2 discussions here already but it still doesn't make sense to me. Everything says its a bad Logic Board.  Ok, Power Mac A1074 2.0 DP  It hangs at white screen w/ grey apple logo and no spinning wheel.  I have ran the Apple hardware diagnostics disc several tims.  Everything comes back that all hard ware is GOOD. I try and run the OS diagnostics on the same disc and it hangs at the white screen/grey apple logo.  I have replaced the hard drive and started it holding 'option"it reads the Apple OS Install disc (just as it reads the hardware diagnostic disc just fine)  when I try to boot from the install disc it again hangs at the white screen/grey apple logo with no spinning wheel.

Info:PowerMac, Mac OS X (10.5.8)

View 14 Replies View Related

Power Mac :: G5 Won't Start Up

Mar 5, 2012

I have a 1.8GHz G5 that will just not boot up. When I start it I get the grey screen with the Apple logo and nothing else. The fan then fires up and up. Have tried starting it in Safeboot mode. In this mode I can hear the initial chime and some activity for about 5-6 secs and then nothing. I have an extra 2GB of Kingston RAM in the machine that I put in a couple of years ago and apart from this nothing has changed apart from upgrading the OS's.

Info:PowerMac, MacOS X (10.5)

View 8 Replies View Related

Power Mac :: G4 Power PC Won't Start

Feb 1, 2012

It was checked with another power cord too, no power at all. The battery has been replaced, still no luck. Who can repair it? I called a guy, he said to change the logic board that "could be" the problem is too expensive. Advice: donate to Salvation army......Nice, right.? I love this machine, even I have a brand new iMac, iPad, PowerBook, u name it! but it runs the Classic and I have all my files written by this op.. System.

Info:
PowerMac, Mac OS 9.2.x

View 1 Replies View Related

Power Mac :: G5 Won't Start Up Correctly / What To Do?

Dec 10, 2007

I will start up my G5 and I hear the chime but at that point my CRD monitors never come on. The lights on my USB hub don't light up, either. Then my G5 fans rev up really high. I have to hold down the power button to get it to shut off, then after waiting around 10 seconds I'll try to turn it on again. After several times of repeating this process, my monitors finally kick on, the USB hub lights up and all is fine for the rest of the day. But it's really aggravating having to do this up to five times to get things going. It's like the G5 isn't communicating to the monitors or the USB hub.

Could this be a motherboard issue? It shouldn't be a power issue, as the only thing plugged into my battery backup APC is the tower itself. I'm at a loss here...

Information:
G5   Mac OS X (10.4.7)  G5  Mac OS X (10.4.7) G5 Mac OS X (10.4.7)

View 9 Replies View Related

Desktops :: Power PC Won't Start

Oct 4, 2009

I have a G5 dual processor ((I think its a 2.5) running Tiger. I had it stored for several months and when I brought it out it won't start.. No response at all to pushing button..

Cord is good as it will power my display.

View 1 Replies View Related

Power Mac :: Os 9 Won't Start Anymore

Mar 29, 2012

I received a semi working powerMac G4 Cube from a freecycle community, and while initially it worked fine, I had to dissemble the unit to replace the dvd drive which had a dvd stuck in it. I used one from a second unit that I was also given and I think the dvd is also bad , as placing the 'software installer', which I presume is OS9, causes dvd unit to make what sounds like spinning noise ( Does not sound to me like its reading anything ), and then after a few seconds it spits it right back out, and this happens everytime.Before I dissembled the unit, the cube at least booted into OS9 just fine, yet I am sure I put everything back properly. I might have chosen a bad setting in system perferences I suppose, and if so is there a fix short of getting a new dvd unit so I can reinstall OS 9 ? Also, I did try 'control' while startup, and it takes me to a very odd screen, with a icon for 'reload' ( browser icon similarity ) , or what looks like a right arrow. Choosing either does nothing, short of showing what looks like a watch moving in circular fashion.

Info:
PowerMac, Mac OS 9.0.x

View 14 Replies View Related

Power Mac :: G4 1.25 Will Start But Not Boot

Apr 20, 2012

I just to start up my G4 1.25 Power Mac and it powered up and would not boot,  instead of the normal audio chimes all I get is a splat on powering up.This machine has been operating OK until now

Info:
iPhoto '11, Mac OS X (10.6.7)

View 1 Replies View Related

Power Mac :: Cannot See The Start Up Manager In G3?

Jun 6, 2012

why I can not see the startup manager in a PowerMac G3 B & W when the computer start?

View 12 Replies View Related

Power Mac G5 :: Loud Fan Noise On Start Up?

Nov 18, 2007

My G5 has been making more noise at start up. It sounds like one of the fans is making a grinding "rrrrrrhhhh" noise. My living space if very cold and quite dusty (warehouse). I notice it more on colder mornings ( inside temp 45° - 65°F ). Should I refrain from using my machine on cold mornings/nights until the heat is running?

Information:
Dual 1.8 G5 (2003)
Mac OS X (10.4.11)

View 1 Replies View Related

Power Mac G5 :: Shuts-down A Few Seconds After Start-up?

Nov 21, 2007

I've got a strange issue with my PowerMac dual 1.8GhZ and I can't figure out where it's coming from.Last Saturday I experienced a Kernell Panic while using Safari and the Dictionary (MacOS 10.5.1).Since then, whenever I try to start my computer, it shuts itself down while the grey screen with the Apple logo is on screen. However, this isn't always the case:I can use my computer 'normally' if I press the option key at start-up and manually choose my startup disk.

I can boot from a Panther or Tiger installation disk, but not Leopard.If I try the hardware test the computer shuts itself down in the middle of the test.TechTool works and didn't find any issues with my computer. Nor did Disk Utility.I tried to erase both my internal hard-drives and do a clean install of Tiger, but the problem is still there (I have to press option at startup).I tried to reset the PRAM and Cuda/PMA. Doesn't resolve the issue.When I tick 'Restart automatically after power failure' in Energy Saver my Mac will indeed restart, meaning it thinks there was a power failure.Any idea what it might be? And why it only happens in certain situations?Do you think it's a hardware or a software issue?

Information:
PowerMac G5 dual 1.8GhZ
Mac OS X (10.5.1)

View 2 Replies View Related

Power Mac G5 :: On Start Up Screen Is Black

Dec 13, 2007

When I start my computer up in the morning everything else starts normally. First the light comes on on the front of the computer and on the bottom of the monitor, then the start up tone rings and the computer is fully running. But my monitor is black and I do not get the apple picture or nothing on the screen. I thought my monitor was going out, but we have another work station the same and I switched the monitors (same 27" cinema screen as mine). I can actually use the other computer and network into my computer and fully use everything on my computer. But my monitor is black (no display)! I have contacted MAC and have reset the PMU button many times and sometimes this works, but most of the time it does not. I just keep restarting the computer and finally it will start up normally with the display and everything.

Information:
Dual 2ghz PowerPc g5
Mac OS X (10.4.11)
27" Cinema Screen

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved