PowerPC :: Does New AirPort Extreme Card Compatible With G3?
Apr 26, 2008
As the title says, will the new airport extreme card with 802.11n work in an old iMac G3 capable of adding an airport card? I know I need the card adaptor, but does this new one work fine, or do I need to buy an older version? Also, which old macs would have compatible airport cards?
I have a first gen Mac Pro, I would like to add an Airport Extreme Card but don't know what the part number is. Does anyone know the part number that's compatible with the Mac Pro?
I would like to upgrade my 17" Powerbook G4 to wireless n, but I'd like to upgrade the internal airport extreme card instead of using a PC Card adapter.
Are there any options for this?Will this airport extreme card from early model MBPs work?
my specs: 17" pwrbk Hi-res 1.67 G4 late 2005 model: Powerbook 5,9
I currently own a G4 PowerBook running OS X 10.2.8 (archaic, I know) which I use as a word processor. I want to set it up to recieve my friend's 802.11 wireless signal (with his permission), which is sent out by a base station tied to a Windows machine. Two questions I have:
First, will an Apple PowerBook and Airport card be able to receive a signal from a Windows machine (I don't see why not, but...)? Secondly, I seem to only be able to find the AirPort Extreme card on the Apple Store. Will the Extreme card plug and play with my notebook, or not? Are there any good third-party cards that I can buy that will work well if not?
My university was tossing an eMac so I decided to take it. I put Leopard on it (10.5) and purchased an Airport Extreme PCI Card (A1026). I followed the instructions here: [URL] to a T, and no luck. System Profiler doesn't recognize the card. So, I decided to take the card out and put it back in while the computer was on. The computer came up with the black screen that says I need to restart the computer; however, upon restart it still doesn't recognize the card.
I called Apple and they were very unhelpful about which airport card is required for the iMac G5 1.6 Ghz. I found a bunch on ebay (A1126) but I think those are for different models.
I have a Dual 2GHz PowerPC G5 running OSX 10.5.8 and want to have wireless capability, if possible. There does not appear to be a dedicated slot for an Airport Extreme card on the motherboard, so I'm wondering if there's a card that would work in one of the spare PCI slots?
I bought an airport extreme card in 2006, and haven't tried installing it until this morning (always been hardwired!) Can't seem to figure it out now, as the card seems too small for the slot on my Powerbook G4.
I bought an eMac off Craigslist. I really really love it. Its the 1GHz model, it does everything I want it to.
I needed it to have wireless for when I bring it home over the summer (Im at school now and we have ethernet cables) so I bought an airport extreme off ebay for about $20.
I followed the instructions (Held the door down, turned it off, installed it and plugged the antenna in) and turned it back on. No Airport symbol appeared at the top.
I searched a little bit, its running 10.3.9 and so i found it requires a driver (it didnt come with a CD).
I installed the Driver, restarted it and still nothing. I even made sure it was installed properly, and as far as I can tell everything is hooked in ok.
The guy who sold it to me is supposedly sending me an install of Tiger, would that help it recognize it? Im not really placing all my eggs in one basket either that he'll send it to me, any suggestions?
I just installed the Airport extreme wireless card on my emac, but I have run into some problems:
1)after installing the card, the mac took a very long time to start up, I tested to make sure it was the card: everytime I started it up without the card, it did the normal thing, but with the card, it took a long time
2)after finally starting up, nowhere can i find where/how to configure the wireless. When I go to configure the network, it has all options, but the airport card option is not usable.
So: how can i access the airport card settings to get wireless connectivity?
eMac stopped recognizing the Airport Extreme Card. I tried restarting, resetting PRAM and the PMU, and pulling the card in and out. Is there anything else I can try?
I have an eMac 800mhz and I'm having trouble discerning whether it's an "early" build which needs the original AP card or a later build. What exactly am I looking for in the system profiler to tip me off?
I recently purchased a refurbished AirPort Extreme Card and AirPort antenna for my late 2004 Power Mac G5. My Mac is running on OS X Version 10.4.11. I properly installed them, since the computer notes the AirPort Extreme card in the "About Mac" menu. There are a couple of wireless networks near my home and the computer doesn't detect any of them. I've checked out previous forum discussions around this issue, tried some suggested troubleshooting to no avail. Can I presume the AirPort Extreme card is defective? It detects absolutely no signal from the other networks around here. Could the WEP password length of our router have anything to do with it? Do I need to download a driver to activate the AirPort Extreme Card? Could upgrading to a different operating system make it work?
i have an airport extreme and I'm trying to install the software for it onto my new iMac. When i plug the adapter into the wall, there aren't any colored lights (amber and green), only white, so i think i have an old airport. so is the software still compatible? what's going on? my internet provider currently is wild-blue and i have a satellite that send the internet to the modem connected to my desktop computer. so do i plug the ethernet cable from the modem to the airport? or from the airport to my desktop. i want to get wireless internet onto my MacBook Pro laptop.
Last week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution.
Intel GMA X3100:
Chipset Model:GMA X3100 Type:Display Bus:Built-In VRAM (Total):144 MB Vendor:Intel (0x8086) Device ID:0x2a02 Revision ID:0x0003 Displays: Color LCD: Resolution:1280 x 800 Depth:32-bit Color Core Image:Software Main Display:Yes Mirror:Off Online:Yes Quartz Extreme:Not Supported Built-In:Yes Display Connector: Status:No display connected
When I send a file from my XP workstation to the Canon LBP-3000 printer connected to my Airport Extreme Base Station I get the following XP Incorrect port message: "The port to which the printer is connected is not supported. Check the port."
I am trying to use a Canon LBP-3000 printer that is connected to the USB port on my Airport Extreme Base Station from a computer running Windows XP. The AEB is connected to an ethernet port on the same XP computer.
I have installed the latest LBP-3000 printer driver from the Canon .au website.
The TCP/IP port settings have been set up as follows:
Port name: IP_10.0.1.1 IP address: 10.0.1.1 Protocol: Raw Raw settings port no: 9100
Note that the printer works normally when connected as a local printer via a USB port on the XP host.
I am running Windows XP Home version 2002 SP3 The printer driver is titled "Canon Advanced Printing Technology for Canon LBP3000 R1.12 Ver.3.02.0.005 (Windows 2000/XP/Server 2003/Vista)"
The AEB firmware version is 7.5.1
Note that I am able to print via the AEB/USB to my Epson Stylus printer using the exact same setup as above (except for the printer driver).
last week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution. I would really appreciate some help.
Intel GMA X3100:
Chipset Model:GMA X3100 Type:Display Bus:Built-In VRAM (Total):144 MB Vendor:Intel (0x8086) Device ID:0x2a02 Revision ID:0x0003 Displays: Color LCD: Resolution:1280 x 800 Depth:32-bit Color Core Image:Software Main Display:Yes Mirror:Off Online:Yes Quartz Extreme:Not Supported Built-In:Yes Display Connector: Status:No display connected
I've been looking at different websites (macsales.com, apple.com), and I don't know which airport card will work for my Mac Pro. I have the first release of the Mac Pro: http://apple-history.com/body.php?pa...der=ASC&range= Can any of you offer suggestions on which card will work? I'd probably prefer the OEM version, but if you recommend different ones, I'll be happy to consider them.
I've recently got a refurbished Mac Pro from Apple, and once I'd set my system up and tried to connect to the internet, I soon learnt that there was no Airport Card installed, so I'm unable to get a wireless internet connection.
Having looked in the Apple Store online, I can't see any internal cards, just base stations. I looked up the Airport Extreme Card, which I thought would solve my problem, but from what I could see that is only compatible with older Macs.
What is the best and cheapest way to get an airport extreme card? I do not want to do it myself. I just want to know the cheapest and fastest way, because I don't want to spend to much time away from my baby.
I gave a fella a hand the other day by pointing him to a post I had on my site. I thought I'd list in in a new thread for others to see too. So if you want to add 802.11n to your Mac Pro, see how I did it. [URL:...]
I got this Airport extreme wireless card (b/g/n)for the MacPro late 2009. There are 2 inputs on the card and 3 airport(antenna) wires to connect it from the Pro. Which ones do I use?
I recently purchased an older model Airport Extreme on Ebay. Came in the original box and looks as though it was never used. I installed it on my G5 single processor which is equipped with an Airport Extreme card. I get my internet from Cox Communications in Tucson via a Scientific Atlanta modem. When I do a diagnostic, it shows everything related to the Airport is green. But, it doesn't work and I have no connection to the internet. What am I doing wrong?