I got an ATI Radeon 9600 Pro All-in-wonder in a box of computer junk. Actually, besides a stick of PC3-6400 memory, it was the only thing that wasn't just an empty box or instruction manual
View 3 Replies
I'm searching for upgrade video cards for my dual 533Mhz digital audio G4 PM. I've noticed that there are several sellers on eBay selling ATI Radeon 9600's and claim they work on PM G5's as well as PM G4's. [URL]. Could these cards just be stock Apple cards pulled from a G5 that happen to work in a G4, or are they altered or flashed PC cards that work on G5's and G4's. Is it common knowledge that you can pull a 9600 out of a stock G5 and use it in a G4?
View 8 Replies View RelatedI picked up a new ATI Radeon 9600 Pro for my PowerMAC G5 D2.3 to run my 30" ACD.
I was going over the installation booklet and its all in PC lingo.
Just realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows
View 5 Replies View RelatedJust realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work [URL] but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows, but im hoping for a miracle hear. Also the box says its 4x and 8x compatible.
View 7 Replies View RelatedI recently purchased a 30" apple monitor to be used in tandem with my 23" cinema monitor. The card that was shipped with my G5 twin 2.5 GZ will not support the 30" as it lacks dual link dvi. Hence the 9600 pro for Mac & PC card. The problem is this...The screens light up at start up but the computer crashes before the boot sequence completes. I took the card to the apple service center where I bought it and it worked fine on both their G4 and G5 machines running Tiger. I cant make it work on mine in Tiger or Leopard.
Information:
G5 twin 2.5
Mac OS X (10.5)
2 drives 750 gig 400 gig
I have a Quicksilver mac will a ATI RADEON 9600 PRO 4x/8x AGP 256MB Dual DVI Video Card - For Mac run any modren game?
View 4 Replies View RelatedI've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
View 26 Replies View RelatedI have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
View 2 Replies View RelatedFor the owners of a uMBP with switchable graphics, how often do you keep your 9600 GT on and what kind of tasks do you use the GPU for? I got the mid-ranged 15" model for the 9600 GT but I can't see myself using it until the release Starcraft II ... and even after I have my desktop with an HD 4870 1GB. Do any of you regret purchasing the model with the 9600 GT?
View 15 Replies View RelatedI also tried installing Windows to see if the 9600 would show up there, but I get a blank screen when booting the XP CD. I get the same blank screen when trying a Linux CD. Is this perhaps because the MBP is trying to use the 9600 but it's borked and not displaying anything.
View 8 Replies View RelatedBenchmarks say 9600 has about twice as much muscle as the 9400 right? So what kind of improvement are we talking about in real life. Especially gaming?
About twice as much frames per second in GPU intensive games like FPS? What about in SRPGs? Similar as well?
I got a MacBook Pro (2.66, has the 9600 graphics card with 256 vram), and I've been amazed by the battery life I get with the 9400. My question is, I don't notice any performance difference between the two graphics cards.
View 10 Replies View RelatedI have a late 2008 MBP with the two graphic cards. Something I noticed was that there was almost no noticeable between the two, even during tasks that would benefit from the 9600, like gaming. For example, to play the Mac Bioshock demo with no lag on max graphic settings, I had to lower the resolution to 1024 by 640 on the 9600. When I tried those same settings on the 9400, it was almost exactly the same performance.
Some I did notice was the under the 9600 stacks appeared much smoother, but scrolling up and down in any window (browser, finder, ect.) was extremely jerky. Under the 9400 scrolling is entirely smooth.
So I am going to be getting a refurb uMBP towards the end of the week and I am trying to decide between the 256mb and the 512mb versions of the 9600M. I will be using it mostly for surfing, blogging, programming, photoshop and gaming. Obviously the gaming is what really poses the question.
I plan to play things like WoW, Aion, L4D2, Borderlands, CoD:MW2, Batman Arkham Asylum, and the like. Obviously this will be done in windows via boot camp.
I purchased a 15" Mac Book pro a little less than 1 year ago. Right after getting it I changed the video to the 9600 and haven't changed it since. I tried switching it back to the 9400 last night and only got a black screen. If I do a hard shutdown and restart the system comes back up on the 9600 and runs fine. If I try switching back to the 9400 the same thing happens again (black screen). Obviously the 9400 worked fine when the system was purchased but hasn't been used since then so I don't know at what point the problem initially started. From what I've read, there are problems with some of the NVIDIA chips but it normally affects the higher GPU because of heat, not the lower one.
View 1 Replies View RelatedCan I have dedicated phsyx enable on the 9400 and use the 9600 as primary for windows 7 for gaming?
View 6 Replies View RelatedI heard that to enable the faster graphics, you have to log out and log back in to switch between 9400 and 9600... Is this true? If so, is there any word on when this will be automatic or if there is any current work around?
View 16 Replies View RelatedAre there any improvements using the 9600 over the 9400 when using photoshop or illustrator? I always use the 9400 on my mbp, with the 9600 the fans start to spin really soon, it's so annoying trying to focus on your work with this thing blowing like an airbus.
View 8 Replies View RelatedI have a PM Dua 2.0 G5, 9600 nvida and a 23in apple display with no video at all. When i turn on the comp i get no video, i see my cpu blinking 3 times then a 5 sec pause. I have tired taking out the video card and re-seat it as well as the ram, i switch it (rotate it) and reset the PMU button, still no video
Information:
G5 Dual 2.0 1 GB
Mac OS X (10.4.10)
Just curious because I want to conserve battery and not use as much heat. I don't really need the 9600 that's in my 15" uMBP mid range.
View 10 Replies View RelatedI've seen a lot of HD 6970 reviews hit the streets today. Can we hope to see some "investigation" from Cindori & company in the near future???
I would love to stick a modded version in my 2008 Mac Pro.
Retail on these cards is looking at about $370.00 (Yeah... 80 bucks cheaper than Apple wants for their single-DVI 5870 )
Requires 1 8-pin and 1 6-pin power connector.2 GB of memory on-board.
I have a few question for people who have upgraded to the ATI 5770 form the 8800GT.
It looks looks the install is pretty straight forward. But what type of performance upgrade can I expect? I use manly Photoshop, Lightroom and X-plane. Are there any hidden got-you's?
I have a 2010 Mac Pro currently using the 5870 graphics card to run a 22� monitor. However, I am going to add a second 27� screen to my setup. I do a lot of heavy 3d modelling so GPU power is very important. I spend hours and hours panning and zooming in dense models so I would like to dedicate the 5870 power to this, rather than it running dual monitors.
I have read that you could use a GT 120 to drive extra monitors but I�ve also heard really bad reviews for its performance, making it really painful to spend an extra �120 on it. The 5770 is �80 more and has a lot more power than a GT 120.
Is it viable to use PCI Express Y-splitters to run a 5770 and 5870 together? If so how would it work? What are the dangers in doing this?
I have done some research and apparently you can use PCI Express Y-splitters to run two high-end cards on the Mac Pro, though, I couldn�t find a lot of info on the subject. I�m not really computer literate but I�m willing to do some moderate internal tinkering in order to run two decent cards (which is really surprising for a Professional computer).
has anyone installed 2 of the ATI Radeon 3870 (mac edition) cards and get crossfire mode to work successfully in XP under bootcamp? I've been trying to for a few days now with no luck!
The drivers for bootcamp on ATI's site won't install on my machine for some reason and when I use the normal xp drivers (successfully) I can't get the crossfire option to show up in catalyst control center.
Also, in the catalyst control center, it only shows the primary card as enabled and says my other is disabled. However, they are both enabled and working just fine according to the device manager.
Cards are installed in 1st and 2nd slot.
Does anyone game on a Mac Pro with an ATI Radeon HD 4870? How is the performance? Can it play most games? I'd be gaming at 1920x1200.
View 1 Replies View RelatedI'm using OS 10.4.11 on a first gen mac pro. Would I have to upgrade my OS or will this card work on it. If the card is not compatible with my OS what cards would be besides the ATI Radeon x1900.
View 1 Replies View RelatedI got an MP09 with Apple HD 4870 512MB graphics card some time ago and while I enjoy working with Mac OS, I also enjoy playing games. At the Mac OS side I don�t really play games or do much heavy 3D stuff but on the Windows side then I play. I noticed that the graphics card kinda get�s hot, not in amounts to worry but still. Catalyst Control Center states the following: 79�C while at 70% load with fan at 20% windows 7 x64, Catalyst 9.12 I would like to tune the fan to 33%. Is there a way to do this? I enabled Overdrive and checked manual fan speed, which doesn�t work (known bug). Then I edited an profile and loaded it, still not at 33% fan speed. I also tried Speedfan to tune the PCI fan of the MP but it doesn�t show me the fans of the MP.
View 4 Replies View RelatedTheres 2X 5770 but not for the 5870 -- is it b/c of the power draw requirements?
View 24 Replies View Relatedwill my Radeon 6970 in my pc work in my wife's Mac Pro, which currently has a GeForce 8800?
View 2 Replies View Related
