OS X V10.7 Lion :: Cannot Access "powerPC Tools" That Still Need To Use
Apr 14, 2012
I got Lion and now running into several problems. There Are files I still need to access and I keep getting "no powerpc tools" supported message. I am also running into problem with the finder. A mac friend helped me "re-boot" finder and Suggested I re-install Lion. That didn't work -- couldn't get the program to "reboot/re-download." Is there a way in which I can get programs/files to work in Lion? Can I revert back to Leopard or Snow Leopard and save the upgrade I purchased for later?
Info:
MacBook Pro, Mac OS X (10.7)
View 2 Replies
ADVERTISEMENT
Jun 2, 2014
It would appear that the new iPhoto app that is being prepared for cross-platform use is being optimzed for cross-platform as iWork applications have been. The tools for altering photos only has a fraction of the tools currently available in Aperture (and even less than available in platforms like Lightroom. There had been hope that with the new iMac Pro that there was going to be a supercharged version of Aperture...but no mention at that role out, nor in today's WWDC.
Info:
Aperture 3, Mac OS X (10.7.2)
View 14 Replies
View Related
Oct 19, 2009
I am running OS 8.6 and have installed the iomega ware for classic on it (I believe the driver is 6.2.3). The drive will power on when I insert the drive. The drive is recognized by the Iomega Tools but will not recognize when a disk is inserted. The drive does not even try to spin up when a disk is inserted. Iomega tools says no disk is inserted. The only way to eject the disk is to put a paperclip in the "emergency eject" hole.
View 3 Replies
View Related
May 14, 2012
I just upgraded my HD to a 1T drive. I had recently reinstalled everything on the original HD, and enabled FileVault2 on the drive and didn't want to go through the tedious process of reinstalling everything. Instead, I used Clonzezilla to image the drive over. Everything works properly. My new drive boots as expected and everything on the FV2 partition shows up properly. Of course, now I would like to extend my FV2 partition to fill the remaining part of the disk. Are there any tools (3rd party or native) that allow me to resize my FV2 partition? Everything I have found to date indicates that I have to disable (decrypt) FV2, resize, and then re-enable FV2. Seems like an extremely long and arduous process. Has noone been able to write a utitility to extend the partition size without needing to decrypt everything? I'm running Lion 10.7.3.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 16, 2012
I have installed an the old xcode tools 1.0 on mainly by Accident on Lion. Now a lot of commands causes the error "the PowerPC architecture is no longer supported." A lot of programms are now buggy... Is there a way to fix that and uninstall the package?
Info:
MacBook
Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Jul 4, 2012
I want to download apple developer tools XCode on my iMac, but it says I need a later version of OSX. What are the downsides to installing the later version (Lion?). I currently have OS X version 10.6.8 on my iMac and it says I'm required to install version 10.7.3 or later. By the way, is the updated version provided free or do I have to buy it? I'm looking to do all of this so I can start to develop an App for my iPad..
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 26, 2012
pro tools will not open after upgrading to lion ver 10.7.s
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 21, 2012
I have just bought a new MacBook Pro 13 (with Intel CPU), and I'm trying to set up my MBox 2, which came with Pro Tools 8 LE (m-powered).I'm getting the error message: "Unable to locate Digidesign hardware. Make sure your hardware is connected and turned on. Click "Ok" when the hardware is ready."The USB socket's light on the MBox 2 does not light up, although the other lights are on as normal.I know this is a widely-encountered issue, and I think it is because this software is not compatible with OS X Lion but I have tried several things so far to isolate the problem:1) Have connected the MBox 2 to my Dell Window 7 laptop using the SAME USB cable and it works perfectly (suggesting the USB cable is okay and the USB socket on the MBox 2 is okay).2) Have tried installing the software and drivers from the Installation CD which came with the MBox 2 onto my MacBook three times, in case there was a problem with the installation. This is the same Installation CD I used to install them onto my Dell laptop which did work using the MBox and Pro Tools 8 LE setup (which suggests that the problem is either with the contents of the CD not being compatible or up to date for the MacBook Pro 13 / OS X Lion 10.7.03, or that there is another problem I need to address with one of these three devices/components)3) I have installed the later drivers for Pro Tools 9 (I believe it was for 9.0.6), although I don’t own the Pro Tools 9 software, so this is a newer driver being applied to my Pro Tools 8 LE software. After I did this, the MBox 2’s USB light DID come on!But… when I then tried to open Pro Tools 8 LE, I got an error: “CRITICAL ERROR - PRO TOOLS NEED TO BE REINITIALIZED” Then when I rebooted, each time I opened Pro Tools it said: "Pro Tools LE 8 has shut down unexpectedly. Please retry…”Could someone tell me if my set up is compatible please? Can a MacBook Pro 13 running OS X Lion 10.07.03 ever operate with a MBox 2 and Pro Tools LE 8?If so, what do I need to do in order to resolve this - is it simply that I need to power on the devices in a specific order?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Feb 2, 2012
just installed the Server Admin Tools 10.7.3 but Server Admin and Work-group Manager are still 10.7. Only the System Image Utility is 10.7.3.
View 7 Replies
View Related
Sep 18, 2010
I'm abroad at university and the school has a pretty wicked proxy that prevents Xbox Live from getting through. I asked an IT guy about it and he said, "Man, I wish we could use it. I just don't know if it's possible." I took that as permission to try. I decided to log on to the school network with my iBook (old school, I know) and share my connection with my Xbox. I followed one of the many, many guides available online and set everything up. When I test my Xbox Live Connection, it connects to the network, accepts my DNS settings and then says, "Xbox can't access the internet." My computer is accessing the internet just fine, but my Xbox can't?
View 3 Replies
View Related
Aug 25, 2008
My son has an iBookG4. Sophus has detected 7 viruses. I'd name them but we're unable to access further info because (presumably) the viruses have blocked his access to the web.
View 7 Replies
View Related
Dec 15, 2008
I have a weird problem with my iBook G4. I cannot get access to the Internet at all. I connect using a TimeCapsule. In total I do have 3 Macs, 2 of them connect just fine just my old iBook gives me headaches. It doesn't acquire a correct IP address either.
I do connect over Wifi. The Wifi symbol in the menu bar gets all bars on the iBook and the TimeCapsule does show 4 connected clients ( I do guess my iPhone is one of them).
So - two Macbook Pros and one iPhone connects just fine to the Internet using this TimeCapsule. It does show 4 connected clients and I do get all the bars in the menu bar on the iBook.
The iBook doesn't get a correct IP address (that is my guess as it totally different from the two Macbook Pros). The iBook runs 10.5.5.
View 6 Replies
View Related
Sep 15, 2010
My Powerbook G4 Titanium is running OSX Tiger and will not open the Date & Time preferences - instead it gives the error message 'System Preferences closed down unexpectedly' with an option to send info to Apple.
This is an issue because the date has reset to 1970 and when I start the mac the time is always 04:00. I tried leaving it connected to the wi-fi overnight to see if the time servers would do their thing, but no luck.
View 11 Replies
View Related
Jul 12, 2008
Someone told me that O2 allows this but I forgot the right term for it so could someone help me with my situation please? I need to be able to access internet on my PBG4 through my iPhone as I'm going on a holiday and there is no internet cafe.
View 5 Replies
View Related
Jan 11, 2010
an older retired couple, recently got cable modem access specifically so I could have it. They are the coolest, nicest people on earth. I'd like to get them on my wireless network as a
View 1 Replies
View Related
May 13, 2010
My G4 finally died, no big deal, I have a pretty recent back up. It simply does nothing when I try to start it, browsing the forums indicates it may be a switch issue, I tried resetting the PRAM. Anyway, I was hankering for a new one anyway. Is there a guide out there to pull the HD to access as an external on the new Imac I plan on purchasing tomorrow? I probably need an external HD kit, but would it be worth it? There are probably some photos and music I added since my last backup.
View 6 Replies
View Related
Jan 21, 2007
Recently my dad inherited an iBook G4. The Airport works, but it seems to accept the signal broadcast from only one of the two wireless access points in the house. The two routers are being used to extend the coverage, i.e. iStumbler and Airport Radar show two entries, both with the same ID.
My Macbook is fine; I can move from one end of the house to the other and signal remains high. The iBook's signal gets weaker as it moves from the router on that side of the house. Is this a hardware issue (specifcally, the iBook's Airport), or is there a way to specify which access point to use?
View 3 Replies
View Related
Nov 9, 2008
I have an iBook G4 1.33 14". The computer all the sudden wont boot anymore and the file/smiley blinks. I tried the Apple Hardware Test CD and got the Invalid Memory Access Error:%SRRO: 00032ed8 %SRR1: 0003030
I tried to boot from the startup CD and once the CD kicked in the screen froze, and other times it says the computer needs to be restated.I removed the ram under the keyboard and still got the same error. I also Zapped the PRAM, Reset the PMU and still no luck.Any suggestions? I love this Mac and currently can't go out and buy a new one.
View 13 Replies
View Related
Mar 4, 2009
I just installed the Airport extreme wireless card on my emac, but I have run into some problems:
1)after installing the card, the mac took a very long time to start up, I tested to make sure it was the card: everytime I started it up without the card, it did the normal thing, but with the card, it took a long time
2)after finally starting up, nowhere can i find where/how to configure the wireless. When I go to configure the network, it has all options, but the airport card option is not usable.
View 16 Replies
View Related
Dec 22, 2008
when i switch my ibook on it says that the date is set to 2001 or earlier and so i need to change the settings.
View 1 Replies
View Related
Aug 2, 2010
I have an iBook G4 which was working fine. A week ago my little sister used the laptop and now I have the following problem:
a) The laptop boots because I get the boot chime, but the screen keeps black.
b) I connected an external monitor to check if the problem was the laptop monitor. When I start the computer, I get a gray screen (in the external monitor), but no apple icon () and cannot pass from this gray screen.
c) I noticed that the caps lock light was not turning on, so I accessed the open firmware (keeping hold the power button - getting a weird chime and a light flashing near the case button - power chime ) and I got the open firmware screen (still in the external monitor) and I noticed that the keyboard was not working also! I connected an external keyboard (usb) and I am able to type.
I know I won't be able to use it as a normal computer because of this weird problem. I was thinking to keep it as a "desktop" with the external monitor and the external keyboard. My questions in this case are:
a) Is it there any way I can boot from cd from open firmware? (I cannot do the "keep the 'C' key hold during start up" because my laptop keyboard does not work.
b) Because I get the open firmware console, could this be a OS problem? What I mean is that if I reinstall the OS, could I at least keep using this computer as a desktop?
View 4 Replies
View Related
Jan 13, 2008
Any ideas ? when i switch my ibook on it says that the date is set to 2001 or earlier and so i need to change the settings. I can't physically access the settings
View 11 Replies
View Related
Mar 20, 2012
I am reluctant to upgrade to Lion due to being quite happy with OS 10.6.8, but now am looking for extra backup and storage after 3 external hard drives dying. Question: can I access iCloud using 10.6.8. on my iMac? - don't have an ipad, as yet. Or an iPhone. What are the major changes between Lion and Snow Leopard, and how difficult would it be to get used to using it, as it sounds like it is catering for those with iPads and/or iPhones and the ways of interacting with those items.
View 4 Replies
View Related
Jun 13, 2009
How can I get it ? It ask me for a password, but.. you know what!
Every time I launch XCode 3.2 on SL and go to Documentation tab at Preferences, it ask me for a password.
I want to use it for Java, but when I try to create a new Project it does not appear there.
View 7 Replies
View Related
Aug 29, 2009
I cant upload to youtube using all the tools available.
View 5 Replies
View Related
Oct 4, 2009
my dad has Pro Tools 8 (the mbox) and he is wanting to plug it into his Mac Pro,
however it seems there is only one FireWire port on the back of the Mac Pro,
which is currently being used to power a 30" and 23" ACD.
How can this work? is there a firewire splitter, allowing you to use two firewire ports from one?Or anything else you can do, does anyone have any idea's?
View 6 Replies
View Related
Feb 13, 2010
im trying to get rid of my 3.1.2 dev tools because im upgrading to 3.1.3 and i try this "sudo perl /Developer/Tools/uninstall-devtools.pl" but after i do that in terminal is says cant find the unistaller for devtools so can anyone help find a way to get rid of these devtools
View 7 Replies
View Related
Jun 2, 2010
As it's a .exe file, only able to be executed using Windows through BootCamp or Parallels, would you be able to run it and overclock gpu/cpu through profile options and have them take effect in Mac OSX or would they only take effect when running Windows on the mac? Trying to find a way to clock my Mac OSX 10.5 2.2ghz 9400 chipset. Have read about it on forums, though i've not read if it will work when just running OSX as I don't regularly use windows.
View 9 Replies
View Related
Jul 3, 2010
[URL:...] I know a lot people are upset that this hasn't been resolved yet. Does ANYONE know if anything has been done yet?
View 2 Replies
View Related
Aug 9, 2008
Does any one know of where to download Developer Tools for Mac OS 10.1 or any other free programing software for Mac OS 10.1?
View 2 Replies
View Related
