I've bought Macbook pro yesterday and checked for software updates. But unfortunately my internet modem restarts for about 10 seconds, and I lost my update. Why doesn't the update resume by itself?
Info:
MacBook Pro, Mac OS X (10.7.3)
I am trying to create a resume in pages '08, but the header on the resume template is way too big for my purposes. I would like to shrink it so I can fit ~ 2 more lines of text onto the first page.
I have tried
1. exporting it to word
2. clicking everywhere in on the page
3. shrinking the line spacing between subheaders and sections, but it was not enough.
4. swearing
Is it possible to make the spacing of the header smaller, or am I just sol?
I'm trying to update my Macbook Pro to the new 10.7.4 I have downloaded the update twice (no interruptions during download) and when i click to restart the computer to install the update, the update dosent install. I keep getting an error message saying the download is corrupted, when the update tries to unpack to install.
Info:
MacBook
Pro, Mac OS X (10.7.3)
My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.3)
MS Excel doesnt work after update to 10.7.3.
Info:
MacBook Pro, Mac OS X (10.7.3), Update
I received my new iMac 27" yesterday and as it has Lion pre-installed I ran Software Update to check.It did this OK, but then my second attempt it had an issue with one of the files and wont complete.Since then when I clcik install items it minimises to the doc, but no sign of progress and does nothing (it seems) How can I get this to work properly again as it should?
Info:
iMac, Mac OS X (10.7.3), Magic Mouse, Wireless keyboard
I've made the update to 10.7.4 last week and since then my MBP doesn't want to shutdown. I tried a few times, waiting for half an hour, but the result was the same. Also, the startup is slower than usual.
View 5 Replies View RelatedTime machine doesn't work after I did the 10.7.4 update. Error message says disk is in read only mode. Tried to repair disk preferences, and this did not work.
Info:
iMac, Mac OS X (10.7.4)
I have late 2011 13"Macbook Pro with Mac OS X Lion 10.7.2
After i update it to 10.7.4 it restarted and shutdown , i open it again only apple logo appeared for 1 min then it shutdown .
Info:
MacBook Pro, Mac OS X (10.7.4)
I have two annoying issues and hopefully one of you can help. i have looked around and cannot find an answer to my question, especially my second one (which i think is connected to the first one). I am using Safari 5.1.3 and OS X 10.7.3. One of the accounts works perfectly, the other has two issues:
1 - Safari will always start with the same set of old windows, even closing some of them and then reopening safari will always get us to the same old set of windows. I understand the (new) standard behavior is that if i open windows A, B and C and then quit Safari, at reopening it will open the same windows A, B, and C. If i now proceed to close window (or tab) C and then quit Safari at the next opening i shouldbe presented with A and B only. This is not the case for me, i am presented still with A, B, and C. I can add to the windows but not subtract. Clearly something is wrong here. Thoughts?
2 - Trying to debug problem 1 i decided to close all the winodws in Safari, then in System Preferences-General uncheck the "Restore windows when ..." and so i hoped that closing Safari and reopening would get me to just the homepage, but this was not the case and i was presented with the same old set of windows. This is easily explained by the fact that under system prefs-general the box i had unchecked was still checked. It lets me uncheck it but does not retain it.... I obviously tried rebooting to no avail.
Info:
Mac Pro, Mac OS X (10.7.3)
I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion.
Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized).
This is the "Trackpad Firmware Update" from the automatic updates.
When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point.
After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)
Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)
How do you totally shut off resume? I've tried unchecking the box at logout, and in system preferences, and it just ignores it.
View 2 Replies View RelatedIt seems that since 10.7.3, the "Resume" "FEATURE" now does not obey the setting the General Control Panel (I have Resoter windows when quitting and re-openning apps un checked). I have an app that is causing the system to hang, but when I send shutdown -h now as root from the terminal and then restart the machine, ALL the applicatinos and their windows reopen, no matter what I do, including the one that is hanging.
Info:
Mac OS X (10.7.3), XServes and XSAN
How can I create a resume from my MAcBook Pro? ex. resume template
Info:MacBookPro
all the applications that were open on shut down resume at start up. Quite a nuisance and unnecessary! How to stop this?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), brand new
I am trying to download the Lion .dmg image using the Lion Recovery partition. My connection is flaky, and keeping a connection for the number of hours the downloader indicates is pratically impossible. Everytime If restart the download, the installer throws away what I downloaded previously. How can the downloder be made to resume a previous download? (This is a pre-installed copy of Lion, so the App Store is not an option)
Info:
Mac mini, Mac OS X (10.7.3)
When I resume from sleep the top half of the screen is grey'ed out and it won't go away without going through Shut Down. Just restarting has no effect.
FYI Just had a look at the sgcreenshot now that its been uploaded and its considerably brighter than the actual screen. In reality the top menu bar is almost completely occluded and the tone graduates out from about 90% black at the top to around 10% black at the centre of screen.
Info:
iPad, iOS 5
After upgrading to Lion, when the Mac goes to hibernation, due to the low battery, and after the resume, some applications tend to crash.
MacBook Pro 15-inch, Mid 2010, 2,66 GHz Intel Core i78 GB 1067 MHz DDR3NVIDIA GeForce GT 330M 512 MB (+integrated intel GPU)Mac OS X Lion 10.7.3 (11D50b
Info:
MacBook Pro, Mac OS X (10.7.3)
how to shut-off the resume feature in Safari in Lion?
Info:
iMac; iBook, PC, na
Yesterday Apple released Safari 5.0.1 and Magic Trackpad and Multi-Touch Trackpad Update 1.0, but Software Update on my Mac makes me able to download only the first one (Safari 5.0.1) - which I did. Why can't it find the Multi-Touch Trackpad Update?
- My MacBook is fine (it's 13-inch, Mid 2009).
- My OS is fine (Mac OS X v10.6.4).
Sure, I can download it manually, BUT it makes me really annoyed if something on my Mac works not as good as it should.
I just left a several hour session at genius bar. I need to install Lion, but it is paused, and the resume button will not work???
Info:
iMac, Mac OS X (10.6.8), lion will not resume installing
If my time machine is backing up to time capsule and the backup size is big like 100 GB. Can I shutdown and resume after startup maybe next day? Will it verify and backup correctly?
Info:
MacBook Pro, Mac OS X (10.7.3)
On my iPhone and iPad mail app, which is sourcing from my Gmail, 'read' mail is changed to read mail (from unread) status on across iPad and iPhone mail application platforms. But not for IMac using Lion.
View 4 Replies View RelatedI just switched from hdd to ssd and i want to resume my Timechine backups, but it says that I have incorrect date and time set in my mac.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Address-book doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your address-book is 5.0.3. PB says You have adressbook 10.5.3, yes, but now?
Info:
MacBook Pro, Mac OS X (10.7.3)
I'm sorry to say that all was OK until.. I updated OS to 10.5.6 two days ago.. and my external 1T Seagate Freeagent Desktop for Mac stopped mounting on Firewire.
It will mount on USB, it will mount on FW when Mac is restarted, but will not when you boot up after your system was shut down.
I tried to reformat, repair the disk, repair permissions and nothing worked.
Somebody posted that you should disconnect your Firewire stuff before OS update? Is this correct?
Can anyone please suggest anything as I don't want to end up having this HD hooked with USB...
Alternatively how can I revert to the OS before the update? Is restoring from Time Machine the only solution?
Why do i have to login at the ADV to get the new SDK and IDE. it makes alot more sense to just send them via software update [URL]
View 2 Replies View RelatedIt just update until the half and then it froze. What i need to do?
Info:
Mac OS X (10.7.3)
I want to update Aperture, but when I go to the App Store it tells me "All apps are up to date". I'm running an iMac, OS 10.6.8, current Aperture version 3.1.3 (latest version stated on App Store as 3.2.3).
I've tried downloading the update manually, but the updater doesn't work and tells me my version of the app must be updated through the App Store. (This is especially annoying because I transferred my Aperture Library to a MacBook which has a newer version of Aperture installed and it reformatted my library to a newer version. Now I've copied the library back to the MacBook but Aperture won't open the library because it's a requires the newer version of Aperture!)
Info:
App Store, Mac OS X (10.6.8)
The problem is this: when I try to turn off my IMac, the desktop disappears and the display becomes white, without anything else. It may stay in this way for several hours, maybe days.
I only can turn it off by pushing the on/off button for ten seconds. The start up is also very slow.
Info:
iMac, Mac OS X (10.7.4)
