MacBook Pro :: (OS X 10.9.3) External LG Flatron Display Remains Black
Jun 22, 2014
I'm trying to connect my rMBP13 (OS X 10.9.3) received a couple of weeks ago to my desk display (LG Flatron W2486L) through apple's DVI-mini display port adapter.
Here is the results:
The MBP freezes a couple of seconds (I guess normal) after plugging in the mini display connector in one of the thunderbolt ports, but nothing happen on the external display (no signal).
The MBP sees the display: from "system preferences>displays" I see the MBP sees the external display and recognises the model "W2486"; but it seems to me that the display doesn't see the MBP...Â
I've tried to restart the MBP, but with the same result.Â
(I've ben using the display through the DVI port with my old PC, so it works).Â
View 1 Replies
ADVERTISEMENT
Dec 2, 2009
I was browsing the internet, not doing anything major, put the computer to sleep, came back 10 minutes later... black screen. I messed with it for an hour or so and determined that the video card went bad (I'm guessing. It's a mid 2007 macbook pro with the nvidia geforce 8600m. My secondary monitor remains black as well). In the midst of totally freaking out, I decided to activate the voiceover utility, enable screen sharing (after figuring out a slew of keyboard commands I didn't know about), and logged in from my girlfriends computer.
I immediately closed all the windows and applications that I had inadvertently opened during the blind wtf session, and opened up system profiler to see if it is recognizing a video card. Well, it is! It's listing the video card as a GMA x3100! Is there a secondary card in there? Cause if there is, it's not working either. Or is that just a default they would put in if it doesn't recognize a video card? Doesn't seem likely. Or, because I'm using screen sharing, is it picking up my girlfriends card? It's not, because she's using a GMA 950. Maybe it's splitting the difference?
View 1 Replies
View Related
Jun 25, 2014
My 2008 Mac Pro display remains black after start up. It is plugged in properly and the light comes on, but the screen stays black. It first started doing this about a week ago, but after a manual restart or two, it would start up properly with the display working. Today the display has remained black every time I've tried to start up.Â
View 3 Replies
View Related
Jun 26, 2012
I slept my MacBook Pro last night and can't wake it? I have rebooted and no bing sound is made. The screen remains black. The volumn keys blip. It is as if it is still locked in sleep mode!
Info:
MacBook Pro, Mac OS X (10.5.4)
View 5 Replies
View Related
Jan 2, 2010
I have a problem: when I restart my Early 2008 MacBook Pro there is no "chime" and the screen remains black. The keyboard doesn't light up or respond to any input, and worse still, the "lid button" light on the front of the notebook remains illuminated, it doesn't blink, it just stays on, shining in my face. I loaded a CD into the optical drive to see if I could use the keyboard to eject it, but this test failed. Now, when I turn on my MBP, I hear the optical drive spinning and the quiet whirr of the fan inside.
I looked on Apple's support website about what to do when a Mac refuses to boot. I tried all of the methods they listed, but since my Mac doesn't respond to keyboard input, all of the techniques failed. Having exhausted everything I could think of, I decided to post here hoping someone could suggest something. I was just on the verge of completing my portfolio website and I would like to salvage my data at least.
View 12 Replies
View Related
Apr 29, 2012
When I open my macbook, the screen remains black (as though it's in sleep mode). Adjusting the brightness always fixes this problem, but this is a temporary fix. The brightness is not at zero when I adjust it after opening, often I need to dim the screen to reactivate it.
This problem is not: related to *clamshell mode*related to unintentionally dimming the screen. related to any of the settings in the Energy Saving panel in system preferences
Extra info: The computer seems as though it doesn't actually enter sleep mode when I close the computer.I don't think there are any processes running that would prevent sleep mode. I really just want the computer to go to sleep properly when I close the screen and more importantly, that it wake-up when opened, or at least when a button is pushed aside from the brightness buttons.
Info:MacBookPro, Mac OS X (10.7.3)
View 3 Replies
View Related
Mar 2, 2009
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
View 4 Replies
View Related
Feb 27, 2009
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
View 2 Replies
View Related
May 11, 2012
I have a early 2011 MacBook Pro 13" running the latest version of Lion. I have been using my MacBook with an external monitor since I brought it in 2011 and have had no problems with connecting it to my external monitor. Connected via mini display port DVI adapter and a DVI cable to a Philips monitor.
Two days ago when I plugged the MacBook back in to the monitor I connected and but now only displays a black screen, I can move the mouse off the MacBook screen and over to the external monitor and back but it is not displayed on the monitor. I have tried connecting other devices to the monitor and they work fine.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 3 Replies
View Related
May 7, 2010
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
View 4 Replies
View Related
Jun 4, 2012
imac a1225 shimes but screen remains black... what can I do?
Info:
iMac, Mac OS X (10.7.4)
View 5 Replies
View Related
Jun 28, 2012
I have a 2009-2010 27inch iMac with OSX and software fully updated.My Mac started shutting down or going into deep sleep when left on.I've tried rebooting, power long hold, checking cords etc.I've attempted the 5 second hold after disconnecting the power cord, plugging back in and start no luck.I hear a very small click inside when I long hold, sometimes a very faint spinning sound but nothing else.The fan came on once after a start attempt but nothing else happened. I can't seem to safe start because the screen remains black.
Info:
iMac, Mac OS X (10.6.8)
View 4 Replies
View Related
May 10, 2010
After moving I setup the Mini, but got nothing from the monitor. Reset PRAM & PMU, nothing. CPU chimes, etc.work, but the only thing I get from the monitor is a yellow square with a brief message indicating there's no signal.
It's a Mini, 2 MB RAM, Core 2, OSX10.5.x, it's less than a year old. The CPU appears to be OK. Monitor is getting power.
View 5 Replies
View Related
May 28, 2009
A few days ago I began having trouble with my Mac Pro (Dual Proc. 2.8 Ghtz, 2 GB RAM, DVI display, OS 10.5) It would not wake up after going to sleep. I did the PRAM and SMC resetting thing, and I thought it had worked, but now just two days later, the computer does turn (the bell rings a la Wall-E and everything) but the display remains blank. I plugged the display into a MacBook pro and it worked fine, so I'm guessing the problem is the DVI port. 3 questions arise:
Does anyone know of a sure-fire way to find out if the DVI ports ARE the problem? I did hook up the computer to a Power Mac (G4 running OS 10.4.11) in transfer mode, and the HD did load, I also performed the first aid thing on it and everything came back positive.
Does anyone know if changing the DVI ports is simple enough to do, or should I definitely leave to a professional? (I am fairly familiar with putting stuff in and out of it)
Should I buy the DVI card directly from Mac or can I get by with a less expensive brand?
View 7 Replies
View Related
Jun 17, 2014
I have a samsung display and I can see the cursor, but nothing i drag and drop over there is showing up. if I drag a tab over, I can see the cursor but not the page, just blackness
Info:
iMac, OS X Mountain Lion (10.8)
View 1 Replies
View Related
May 14, 2012
I am not able to project my MacBook Pro onto a LG Flatron display. It recognizes the external display, it just doesn't project.
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.3)
View 1 Replies
View Related
Jan 14, 2010
I have a MacBook Pro 15" and my father has 17", both 2007 model.
I bought a new Samsung XL2370 external monitor (1920 x 1080) for my notebook. When I connect it to the 17" model, it works fine and gives me the full picture.
However, when I connect it to my 15" MBP, even at 1920 x 1080, the display gets cropped on two sides with black bars.
If I change the resolution to 1680 x 1050, then the whole screen is filled. But if I put it to 1920 x 1080, this happens.
View 2 Replies
View Related
Apr 30, 2007
My iBook will not display anything on its screen. Rather, it just remains black. One time, the screen did come on, but then shortly after booting, it flickered a lot and then went black again. A year ago, something similiar happened and when I took it to be serviced (when I had AppleCare), they had to send it away and have a new logic board installed. Now this machine is out of warrenty and and I am not sure what to do, or even if it is the same problem. Any suggestions?? Thanks!
View 1 Replies
View Related
May 24, 2012
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
View 1 Replies
View Related
Dec 13, 2009
I have a 2007 santa rose mbp and recently I have been having display issues. Out of nowhere is seems that my display just goes black. You can tell that the screen is still on because of the backlighting; its just the picture that seems to disappear. However, the computer still seems to be working fine. I can remote screen share and use the computer normally as if nothing happened. I have no idea if this is some kind of a hardware or software problem... Can this be an indication of the 8600M GT dying?
View 9 Replies
View Related
Jan 9, 2009
well was using my macbook and he display suddenly went black on me. I charged and restarted with no luck I usually get a quick flash and then it continues to start up. now if I look closely the system is working properly becasue i can see my log in screen very faintly in the back ground. Does anyone know what my issue may be?
View 4 Replies
View Related
Aug 18, 2009
Since the new line of MBP I have fallen more and more in love with the black frame around the display on these MBP. Feels like the display is much easier for the eyes.
Do anyone know if it is possible to buy a skin/coverfoil/etc to cover on the alu frame around my MBA display?I have found a lot of pages/webshops that provide skin for the front/back and trackpad, but nothing for the frame around the display.
View 10 Replies
View Related
Dec 1, 2014
after starting with power button, I hear apple thud and apple sign comes on, and can hear machine is on, but no display. What has occurred and how do I get display to work as normal?
View 1 Replies
View Related
Sep 4, 2014
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.Â
Info:
OS X Mavericks (10.9.4)
View 2 Replies
View Related
Apr 6, 2010
I have a 19-inch Envision EN9410e LCD flat panel monitor. Right now I did a mirror display setup. The native resolution of this monitor is 1280 x 1024. When I went to System Preferences to change it to that resolution my LCD monitor shows the Snow Leopard desktop but it's in the middle of two black bars. I had to revert to 1024 x 768 resolution to not have the black bars show. Is there a way I can change it to the native resolution and not have the black bars on the top and bottom show up on the screen?
View 2 Replies
View Related
Jun 25, 2010
I had a repair done to my mac because it was beeping when i tried to turn it on and the display stayed black. They only replaced one part... does anyone know what this part actually is and what it would have cost me to buy myself???
it says logic board: Item number 605-1795
I cant find out what this part even is...
View 1 Replies
View Related
Jul 8, 2010
I have a core i7 MBP with the high res display, and when the display is showing black, a horizontal green line appears on the screen. It is only visible when the screen is showing black or another very very dark color, and the line is not visible with the screen off. It isnt something on the screen, as rubbing it does not affect it at all. I cannot post a screenshot of it, because it does not appear in the screenshot (it does on my screen, because the line is there physically, but on other monitors it is not visible).
View 3 Replies
View Related
Apr 26, 2012
I am trying to use external display with my Unibody Aluminium Macbook Pro (NVIDIA GeForce 9400M, 2.26Gh, snow leopard). Cable setting I use is quite complicated as it is: macbook: minidisplay port>hdmi> DVI D : display. Display is LG Flatron W2242T (4:3).So I hooked everything up and macbook detected display without any problem. The problem arises when it comes to resolution. Maximum resolution I can set (and in fact the only except 800xsomething) is 1152x870 and not only it is to low, but also it does not respect 4:3 ratio so it looks quite bad. So bad, that i cant really work on a setup like that. When I try to change resolution to any other, Display goes black. I tried using some apps, but they dont really work.
Info:
MacBook Pro (13-inch Mid 2009)
View 2 Replies
View Related
Sep 5, 2010
So I've got my MBP that I've had for about 4 months, the thing is. It just recently started to have screen flickering issues. I'll be sitting doing w/e as usual and all of a sudden the display goes dark, almost black, for a second, then comes back up again. I have yet to find any trend in when this is happening, but it is definitely happening on battery as well as plugged in, but it seems to be getting worse.any one have any idea what this could be, something I can fix on my own, or should I take it in?
View 7 Replies
View Related
Jun 24, 2009
I have a 6 year old PowerBook G4 12" (Model 6,1) hooked up to a 20" VGA display using the Apple Mini-DVI to VGA adapter that came with the computer. Perfect performance for several years. I now want to hook up my early 2008 Black MacBook Intel Core 2 Duo 2.2 GHz. (Model 3,1) to the same monitor. The "Mini-DVI" connector on the MacBook computer does not mate with my adapter! It is real close in size and shape, but is obviously a different connector design.
The MacBook manual says the display port is a "Mini-DVI". The older PowerBook manual also says it's display port is a "Mini-DVI." Apple's site implies that the two computers require the same adapter, but that is obviously wrong. Some of the product reviews say that the Apple information is wrong, but no one has posted the correct information (part number). Is there an adapter for the black MacBook to VGA? I've spent all afternoon searching (including here an MacRumors) for the real part number for an adapter. No luck. I have also tried several Apple phone numbers and the chat forum, all with no results. Does anyone know what I should order to adapt the MacBook display port to a VGA cable, and from where?
View 3 Replies
View Related
