MacBook Pro :: Upgrade To Lion Causes Black Screen?
Apr 1, 2012
I read early discussion posts on this topic and thought by now Apple would have corrected this poblem but apparently not. I updgraded my MacBook Pro last night to Lion and since last evening I have had 5 black screen (failures) and had to power off and reboot. Is there a known correction or update to this problem? It is extremely disappointing as I need my Mac for my business and cannot afford to send it to a depot for a five day repair.Â
This same problem was happening to me with an older OS but ONLY when I used both PowerPoint and Parallels at the same time. For this probem I took the MacBook into the Genius Bar and had to leave it there through the weekend and all day Monday. They told me after running multiple tests they found no hardware problems and the issue had to be software. The only fix was a five day depot repair. I thought I would manage by not using PowerPoint and Parallels together but now, with the Lion Upgrade it happens with ALL apps and when I simply try to read an email.Â
Info:
MacBook Pro, Mac OS X (10.7.3), Black Screen of Death.
View 1 Replies
ADVERTISEMENT
Sep 10, 2009
So I installed the 10.5.8 upgrade on my MacBook4,1 early -08. First impressions was that the screen got really bright. After a coupple of minutes the screen went black. So i called up Apple tech and asked what to do. After a coupple of NVRAM and PRAM (alt + cmd + R + P w. battery removed before) no success. I had to go to work and left it hanging.
When I got back I gave it a shot my self. After hocking up the computer to my TV I could see what I was doing without using a flashlight as a light source on the screen. Managed to reinstall Leopard clean, that didn't help.
Called up Apple tech again and asked for help, but no success there.
Installed Ubuntu 9.04 and the problem resided. So i removed all partitions, incl. the EFI and reinstalled Leopard. Same problem. In anger i tried to alter the screen brightness controls as the screen flashed before my eyes when i used them. I figured out that i could set the brightness to lvl 4 (out of 15) and the light wouldn't go out, at lvl 5 the light would be on for a while and then die. The higher the levels the faster the screen goes black.
Anyone experienced this with the 10.5.8 update?! Do you have any solution to this problem?
Update: Booted from the install disk while pressing D for diagnostics. Ran the extended test four times without any problems found. Problem remains.
Update: I reinstalled Leopard (10.5.2 that came with the MB) and repaired the permissions after the clean install. Installed Combo Update 10.5.8 and fixed the permissions, same problem still occurs. Clean installed Leopard 10.5.2 again, repaired the permissions. Combo Update 10.5.7, repair permissions, Combo Update 10.5.8 repair permissions. didn't help. Started up in Safe Mode and repaired permissions. The screen goes black after a while in 10.5.2 also. Problem is still unresolved.
View 5 Replies
View Related
Feb 12, 2012
I am experiencing black screen and kernel panic issues on a macbookpro 5,5 (Late 2009) running Mac OS X Lion 10.7.3. Theses are two of the most recent error reporting logs sent over to Apple Inc.:Â
Log 1:Â Interval Since Last Panic Report:Â 5191 secPanics Since Last Report:Â Â Â Â Â Â Â Â Â 1Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Sat Feb 11 19:27:15 2012Panic(CPU 1): NMIPI for spinlock acquisition timeout, spinlock: 0xffffff80149c2c40, spinlock owner: 0xffffff80141c4000, current_thread:
[code]....
View 3 Replies
View Related
Apr 1, 2012
I bought a MacBook Pro 17inch i7 in November 2010 and it was working fine under Snow Leopard and Lion since then. Yesterday I installed Bootcamp and it was workng also. Today when starting from Bootcamp to Lion I had a Kernel Panic (had this never before) and the screen turned black. I just have the energy cable connencted to it, the computer starts somehow (noise) but no Startsound and screen keeps black.Then I made a little mistake by inserting a LION installer DVD. Cannot get this out anymore, even when I press the trackpad when starting it. I changed the internal hard drive to be sure that the problem does not come from there. I reset the PRAM. I reset the SMC. No way to get the laptop back to work.
Info:MacBookPro, Mac OS X (10.7.3), 8 GB RAM, 30 ACD
View 5 Replies
View Related
Apr 29, 2012
When I open my macbook, the screen remains black (as though it's in sleep mode). Adjusting the brightness always fixes this problem, but this is a temporary fix. The brightness is not at zero when I adjust it after opening, often I need to dim the screen to reactivate it.
This problem is not: related to *clamshell mode*related to unintentionally dimming the screen. related to any of the settings in the Energy Saving panel in system preferences
Extra info: The computer seems as though it doesn't actually enter sleep mode when I close the computer.I don't think there are any processes running that would prevent sleep mode. I really just want the computer to go to sleep properly when I close the screen and more importantly, that it wake-up when opened, or at least when a button is pushed aside from the brightness buttons.
Info:MacBookPro, Mac OS X (10.7.3)
View 3 Replies
View Related
Apr 14, 2012
I'm have an issue where when I login to my mac, it goes to a black/grey screen. It's definately on, but you just can't see anything. I'm think poss hard drive failure, but I'm not sure.  Â
Earler this week, I noticed copying files from different devices and HDD, were particuarly slower that normal. Today the screen started to flicker quite eratically and I had to force a restart. It seem to be ok after that. However a few hours after, while I was doing some work, the screen just went a greyish black. Â Â Â
Each time I re-booted, it would either just go to a black screen as soon as it started up, or, get all the way the the desktop, then the black screen would appear.  Â
I've reset the PRAM and SMC. I even got a Blue screen while halfway through performing a Hardware test. Â I've tried changing the memory modules and still no luck, safe mode fails too. Â Â Â
Could it be HD failure? Or something more servere like the logic board. I did the Java update today too, however, I'm sure the screen was flickering before that. Â Â Â
Info:
iMac, Mac OS X (10.7.3), 750Gb HD, 4Gb Memory, 3.06Mhz CPU
View 4 Replies
View Related
May 1, 2012
my iMac(mid-2010) screen goes black soon after startup.i did notice some flickering about a week ago.i tried shutting it down,removing the power cord and all peripherals but it didn't help.i had done a software update a few days before the flickering started.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 8, 2012
I have had to do hard restarts in Lion when it satrts up with a black scren and the mouse pointer and nothing else. It happened most recently today with a scheduled wake up from being asleep. The other day it restarted with the pointer acting as a painting program and actually colored the path of the cursor until it eventually painted in enough of the login window to enter my password and log in... I have reinstalled the os from the App store and it still acts strange some times...
Info:
Mac Pro, Mac OS X (10.7.3), 2007 model, 3 Ghz quad
View 6 Replies
View Related
May 19, 2012
I installed 10.7.4 update and now my screen goes black. It is quiet random at times, but mostly goes black after a few seconds from wakeup. Pressing the space-bar restores the screen, then sometimes it goes black again almost immediately.
Anyone else having the same problem?
Info:
iMac, Mac OS X (10.7.4)
View 4 Replies
View Related
Feb 27, 2009
Does anyone know if the 500GB Hitachi Travelstar 5K500.B 5400RPM 9.5mm 2.5" SATA HD will work in my 2.16GHz black MacBook MB063LL/A? Does anyone know of any better hard drive upgrades?
View 5 Replies
View Related
Mar 7, 2012
when I tried to launch the macosx lion, after display the login window, the whole window become black.Â
Then I inject the U-Disk that has MacOSX Lion Installer in it, after the white screen, it become black too. So I can not re-install macosx.Â
Then I tried press `shift` at login. It also didn't solve the problem. At last I tried the single user mode. It appears some problems:Â
... USBF ... The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of Hub at 0X24000000)
no interval found for . Using 8000000Â
USBF: 9.62 AppleUSBEHCI[0Xffffff800ba92000]::Found a transaction which hasn't moved in 5 seconds on bus 0X24, timeing out!(Addr:0, EP:0)
...(it appears 5 times)Â
USBF: 51.642 [0Xffffff800c4eaa00] The IOUSBFamily was not able to enumerate a device.Â
Info:
MacBook, Mac OS X (10.7.3)
View 4 Replies
View Related
Mar 9, 2012
In the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours.Â
Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop appears (after logging in). This did not occur until I got 10.7.3 and only within the last 2 months.
Info:
MacMini 2011 i5, 8GB, Radeon 6630M , Mac OS X (10.7), iPhone4; headless dual G5 via FW800
View 2 Replies
View Related
Feb 18, 2012
I have a 24inch iMac 3.06ghz and seems to be stuck restarting. It will not get to the any screen (just stays black) and constantly restarts, the chime seems to get quieter each time, after about 6 times it comes back to full volume but will not get any further in the start up process.
I restarted it myself because the screen was flickering very quickly and seemed to freeze (this is the first time I have encountered that). I had to power down by the button at the back, then restart using the power button and now won't start up. All software fully up to date. Running Lion.
Info:
iMac, Mac OS X (10.7)
View 6 Replies
View Related
Apr 19, 2012
On my Macbook Pro 13 inch, there is about a 3cm black space and made finder and all my windows smaller?
Info:
MacBook Pro
View 1 Replies
View Related
Feb 3, 2012
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
View 3 Replies
View Related
May 24, 2012
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
View 1 Replies
View Related
Sep 16, 2009
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies
View Related
Jan 4, 2010
I have a problem with my screen - when there is something black on, I can see a faint mark of a lighter colour. I have tried to take a picture, please excuse the poor quality. There is nothing visible when the screen is off, even under close examination. Is it less visible when lighter things are on the screen, and invisible when the screen is white.
No drops or liquid spills. Will this go away on it's own? Any fixes?
View 6 Replies
View Related
May 22, 2012
The System Mac OS X 10.7.3 has no missing icon in the main system preferences -> Apearance "Blue"Â Screenshot 1, 23.05.12 AFTER UPDATE: The System Mac OS X 10.7.4 has a missing icon in the main system preferences -> Apearance "Blue"Â Screenshot 2, 23.05.12 What about you?
View 1 Replies
View Related
May 5, 2012
I've had my mac for about three years now and everything was working fine. After I installed lion, I notice that this started to happen. I don't lose any of my information though when it does that. It just goes into a sleep mode I guess? Anyways, is this a feature from the lion update? Something standard?
Info:
MacBook Pro, iOS 5.1
View 2 Replies
View Related
Mar 27, 2012
My macbook pro just has a black screen with a small coloured circle on the right of the screen. It is frozen and wont respond to turning it off or on. It is plugged into mains power.
Info:
MacBook Pro
View 1 Replies
View Related
Jun 2, 2012
When my MacBook Pro 13" i5 goes into screen saver mode, which is black, it won't return to normal mode. Tried all keys, trac pad, closing the lip and re-opening it, and it won't respond. The only thing that works is holding down power button for hard shutdown, then restarting it. It has happened 8 times in the last 2 weeks.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 5 Replies
View Related
Jun 3, 2014
After an update(I think) I can no longer get into my computer. When turned on I get the apple logo then a grey screen that turns to black but the curser is active . Then there is no more progress to the startup screen
Info:
MacBook Pro, iOS 7.1.1
View 2 Replies
View Related
Jun 27, 2014
Computer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
View 5 Replies
View Related
Apr 17, 2012
Only way to recover is hard restart. Just downloaded Lion two weeks ago - problem started shortly after.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 5, 2012
Today I upgraded a MacBook Pro from 10.6 to 10.7.3 and every time I try to shut it down or reboot it will go to the gray screen of death and ask to be powered down manually. On reboot it gives an error report.
Here it is:
Interval Since Last Panic Report: 2344 sec
Panics Since Last Report: 8
Anonymous UUID: 731B3211-37FB-4C90-9D90-C15739B5E84C
Thu Apr 5 17:26:25 2012 .....
I've tried to verify/fix permissions/disk but that didn't work. I even reinstalled Lion, but not from a fresh install. I'm trying to avoid a fresh install as this machine is used by many different people and it would be a pain to reinstall everything that is currently installed on it. This machine does have Deep Freeze installed. Could this be related to the issue? Even though the kernel panics on shutdown/reboot Deep Freeze is still able to save it's changes and boot thawed or frozen. Conversely, I have also tried to run a thunderbolt stability update and it can not complete due to the kernel panic.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 13, 2012
I hear the initial "turning on" sound, buy after that there is nothing.What is wrong and how can I fix it?
View 11 Replies
View Related
Feb 9, 2010
Upgraded to a 1.5TB seagate, followed all instructions as perfectly as possible, but her back together and the lcd screen just glows slightly. When I attach an external display that display works fine.
View 2 Replies
View Related
Sep 4, 2014
My computer won't start. If I'm holding in the power button, you hear the HD starting the boot. The instant I let go of the button the computer turns off. The longer I hold the button, the longer it attempts this process, until I get to the point where holding the power button would manually shut the computer down. Happens computer plugged in or on battery. Screen never changes from black screen.Â
Info:
MacBook Pro, OS X Mavericks (10.9)
View 5 Replies
View Related
Jul 19, 2010
My Macbook is brand new! (Barely 4 months old) Just recently my laptop will flash a black screen. It starts from the bottom and quickly flashes up the screen higher and higher each flash! i have read on some other pages it is a bad inverter on the inner core of the Macbook. Other than that I do not know what to do!
View 3 Replies
View Related
