OS X V10.6 Snow Leopard :: A Communication Error Has Occurred And Canon MX700 Printer Not Working?
May 18, 2012
I have a canon mx700 printer.I just upgraded to snow leopard 10.6.8 and now my printer is no longer working.This is probably the 50th time I have had this problem. It always occurs whenever I update my apple software. I have tried reseting my settings, updating my drives and trying to connect the printer directly into my computer and over my network without any success. Upon resetting my drives I keep getting this error a communication error has occurred.
View 2 Replies
ADVERTISEMENT
Apr 29, 2012
We have a Canon MG8120B printer on our wireless network, using a Time Capsule as the WiFi hub. Printing from the 27" iMac has never had a problem. But from our 11" MacBook Air (late 2010), it fails about half the time, simply saying "A communication error has occurred". Pausing the print queue and resuming it will eventually get the print job to succeed, but it's a pain, and I do not understand why the two machines act differently.
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 21, 2012
When I try to empty my Trash with a certain app in it I get error code -8003. I can't find reference to that code anywhere and do not know how to clean up the trash. "The operation can’t be completed because an unexpected error occurred (error code -8003)."
Info:
iMac, Mac OS X (10.6.7), iMac-24, iMac-27, G5, G4, G3, iBook, etc.
View 2 Replies
View Related
Sep 3, 2009
Has anyone got a work around for the Canon IPF500 printer.
I need to get this working, but waiting for new driver to be released from Canon.
Anyone know any temporary fixes?
View 2 Replies
View Related
May 3, 2012
I had trouble with my printer before and I did everything from resetting it to the LAN setup, enabling bonjour, and when I enable bonjour on the printer, it worked the first time. But now months later, when I try to print, it says, 'communication error'. I deleted the printer and tried adding it again using the system preferences, printer&fax, then pressing the '+' button to add the printer but for some reason, the printer doesn't show up.
Info:
MacBook, Mac OS X (10.6.8)
View 5 Replies
View Related
Jun 19, 2012
Unable to burn disk a internal error occurred?
Info:
iMac, Mac OS X (10.6.8)
View 7 Replies
View Related
Dec 9, 2009
I was wondering if anybody knows why my canon i9900 printer is printing so slow in snow leopard. I have updated the drivers with the latest that apple released.
View 1 Replies
View Related
Dec 25, 2009
I'v been running Leopard on my wife's MacBook Pro since we got it in May. We have a Canon MF4150 attached to it via USB and have been sharing it out from the Mac. I have been using Bonjour and have been printing just fine from both my XP machine and my daughter's Vista machine. I just upgraded to Snow Leopard. I upgraded the drivers to the Snow Leopard compatible drivers from Canon and everything prints fine from the Mac. However, whenever we try to print from one of the Windows machine I get this popup on the Mac: "Canon UFR II Printer Driver key value specified for ticket does not exist.: 15512" And the printer is now "paused" whatever that means. When I try to unpause it, I get that some popup error. I end up having to delete the printer and re-add it to get printing (from the Mac) working again. I've deleted and re-added the printer many times. I even went to far as to remove the drive on the Mac manually (according to Canon's directions) and reinstall. I've deleted/recreated the printers on Windows using the Bonjour wizard.
View 6 Replies
View Related
Feb 19, 2012
How to install Canon MP 810 printer driver?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 15, 2012
How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.
View 3 Replies
View Related
Mar 8, 2007
I had to have my logic board replaced in my 12" G4 Powerbook. I restored my hard drive content (from Retrospect) and all seem to work fine. Programs and files are where they were as per the last backup. But now none of my printers are recognized. I can have them appear in the Printer Browser window but when I try to add them an error message comes up. "An error occurred while trying to add the selected printer. server-error-service-unavailable." I have run both TechTools Pro, and DiskWarrior and have restored permissions and zapped the PRAM. The problem occurs with both USB printers on AppleTalk and on our network printers at the office.
I have also...
1. Launch Printer Setup Utility and reselect the printers.
2. Try Printer Setup Repair and ran its utility routines and the problem still exists.
I don't want to archive and install OS X if I don't have to.
View 2 Replies
View Related
Mar 7, 2010
I finally got around to installing Snow Leopard this weekend. After installing it, I get the following error message when trying to print to a Canon MP620. Tree connect failed (NT_STATUS_BAD_NETWORK_NAME) I then downloaded new drivers from Canon but still get the same error.
I am using a wired connection on the printer and the iMac. The printer still works on a separate XP machine.
View 1 Replies
View Related
Feb 4, 2012
When I try running Software Update to install Security Update 2012-001 I get "An unexpected error has occurred" at the end of the installation process. I tried downloading the standalone installer but that fails too.
Info:
Mac Mini, 1.83 GHz C2D, Mac OS X (10.6)
View 14 Replies
View Related
May 30, 2012
My Canon MF8380 had been working fine with my MacBook Pro (printing wirelessly), and all of a sudden today I am getting an error that says: "Canon CMFP Printer Driver: Printer is not responding. Check the printer power and connection, and then try sending printing job again."
I have tried the basics - turning off and on the printer, rebooting the MacBook Pro, printing from different applications, making sure Job Accounting is not checked in setup, seeing that the driver seems like it's acknowledged, checking and unchecking sharing prefs.
Info:
Mac OS X (10.7.4)
View 1 Replies
View Related
Jul 22, 2009
Anyone else having this problem?
My HP A-I-O printer is not working under SL. Tried deleting the printer in Prefs. and reinstalling the drivers a bazillion times. I even went out and bought a *new* HP printer and I'm experiencing the same problems.
View 5 Replies
View Related
Aug 13, 2009
I have my Canon iP4200 printer hooked up to my iMac and have been using it for years with out any problems until today. When i try to print something nothing happens. In the Printer queue application thing in the dock, it shows the document in queue and its status is "printing". On top of the window it shows this message: 'GenericClass: waiting for device' whatever that means i assume thats the issue but have no clue what it means. I have so many things to print for uni and need to get this working again, how do i get it back to working order again??
View 5 Replies
View Related
Sep 10, 2010
Not idea why but the my Aventail VPN client worked before is no longer working now - "Unknown FATAL error occurred. Please see logs and contact your Network administrator."
Rebooted, shut down, deleted using zapit and reinstalled and still show the same error.
View 5 Replies
View Related
Feb 9, 2012
I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer.
Info:
Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 17, 2012
I have had a Canon MX700 for a few years now, and have generally been very happy with it - when it works.
One bugbear of mine is that the "Scan to" button on the scanner stops working from time to time. It will work magically for AGES, then.. Pressing the button shows "Set the PC to start scanning" on the printer.
This usually results in me spending hours removing, and re-installing Canon drivers/software, restarting my Mac(s), the Printer, my Wireless, etc, until I eventually get this going again. (Pressing the "Scan to" button results in a list of my Macs to scan to).
When the printer is doing this, scanning from the Mac(s) works no problems - using Canon's Scan software, or Image Capture. Printing works fine also. So, the Printer can clearly communicate to the Mac(s). It just doesn't allow you to initiate the scan from the Printer.
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Oct 2, 2010
I should have posted in this forum first as its printer related. But does anyone know how to get the above printer scanner working with snow leopard?
View 3 Replies
View Related
Dec 3, 2014
Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
View 3 Replies
View Related
Feb 12, 2009
I have a Canon 780 installed which seemed to print fine for a while, but now when I try to print I get:Error Number : 306 A communication error has occurred. Make sure that the printer is plugged in, powered-on, and properly connected to your computer. Then try printing again.The printer is connected via a USB Hub, but plugging it directly into the USB Port doesn't seem to help either. I've also made sure I "woke up" the printer, plugged, replugged, etc.If I mess around plugging and unplugging, it eventually will work.
View 2 Replies
View Related
Apr 10, 2012
I am unable to install the "Applications Install Disc" it just says: an unknown error occurred...please contact the software manufacture.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
Jan 7, 2010
I am very new to Mac (two weeks now) and I was having the smoothest of installations of my new Canon MP990 AIO printer. I carefully followed the instructions, went to Canon's website to get the proper drivers for this printer (because the disc does not have software for 10.6). My wireless network found the printer no problem. Heck even the MacBook found it and installed it no problem...or so I thought. Every time I try and print I see "No Printer Selected" and then when I try and repeat the step of selecting my new Canon it says you already have this printer set up and is asking would I like to set it up again. I can't seem to find where the printer software is even installed on the MacBook. Afterwards I tried installing the CD on my PC laptop. Just as with the MacBook, smooth and easy install...easier because I didn't have to download. Anyhow the PC is printing really easy. I am disappointed because all the reviews I read about this printer made it sound like a monkey could get it going. I've spent over two hours and not feeling very good about being dumber than a monkey.
View 2 Replies
View Related
Jul 2, 2012
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Dec 2, 2014
I use MacBook Pro and I updated from the Snow Leopard to Mavericks, OS 10.9.5. My printer is Epson Photo R2000 WiFi Wireless.Before I updated, I very seldom had problems printing. Now after updating to Mavericks, I very very often get a 'Communication Error' , then
'Printing - looking for printer', then 'Printer not connected'. and if I click off and on the 'pause' feature several times, often up to 7 or 8 times, it will eventually print. Apple would probably say this is Epson's problem and Epson would probably say this is Apple's problem. but it is very difficult to complete my projects when I can't get the equipment to work properly.
Info:
MacBook Pro, OS X Mavericks (10.9.5)
View 4 Replies
View Related
Jun 2, 2014
I have a wireless printer that has stop working..HP 6510..
when i try to print the queue says the uri is incorrect or no longer exists and then pauses the printer with the statement Communication failure..
Yet.. when i go to the printer setup and look at the options i'm able to see the printer and send a test print, can't from the queue itself
I've tried reloaded the latested driver,,,re installed... verifying disk permissions.. i can ping the printer, get to it via a web page,,,
Note when i try to build the printer during the final set up it says communication error..
Info:
MacBook Pro, Mac OS X (10.7.5), Hp printer 6510
View 3 Replies
View Related
Apr 15, 2009
I switched my EpsonR320 from my PC (where it works fine) to my Mac Mini. I downloaded the proper driver. It just says "communication error" when I try to print. I've tried several printer cables, to no avail. If I bring up the printer window it says "printer ready", until I actually ask it to print and then I get that error message.
View 1 Replies
View Related
Apr 21, 2012
I am getting this error "The operation can’t be completed because an unexpected error occurred (error code -50)." when I try to transfer files from my Mac Mini to my External Harddrive which is connected to my Airport Extreme. " The error does not appear to happen all the time. It does seem consistent if I am transfering files and then try to transfer more.
The files I am transferring are .mp4. It does not appear to care about the size of the file, it happens with small files and large files, I can transfer some large folders (2.54G). I can connect the hard-drive externally directly to the mac mini and it will transfer any file.
View 3 Replies
View Related
Mar 21, 2012
The disc can’t be burned because an unexpected error occurred (error code 0x8002006E). I keeep getting this when I try to burn my daughters wedding pic to a dvd.
Info:
iMac, Mac OS X (10.7.1)
View 2 Replies
View Related
