I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer.
Info:
Mac OS X (10.7.3)
how to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replies View Relatedi could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5. how could i connect wireless?
View 1 Replies View RelatedCanon says "due to certain incompatibilities between Mac OS X Lion (10.7) and our previously released Mac OS X 10.6 Printer and Fax drivers, you may not be able to print and an error log file will be generated that could potentially fill up the hard drive of your Macintosh computer."[url]
Info:
MacBook
Pro, Mac OS X (10.7.3)
I have just upgraded to OS mavericks. My Canon MP550 printer, scanner worked fine on the old Mac. However, with the new Mac the printer works but the scanner doesn't. What should I do to make it work?
Info:
iMac, OS X Mavericks (10.9.3)
I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
I just installed MAC OS LION after snow leopard and now I can't get the iMAC to communicate with my canon printer. I installed the canon drivers again but still no go.
View 2 Replies View RelatedThis is not a Canon problem as other computers (PCs) detect the scanner and work fine. This was originally the easiest multi-function printer/scanner setup I ever did.The scanning is easy and worked fine for a couple of months, then several days ago it gave "scanner not available" message,tried deleting the scanner and then adding, now it will not detect the scanner ONLY the printer
Info:
iMac, Mac OS X (10.7.3)
I have my Canon iP4200 printer hooked up to my iMac and have been using it for years with out any problems until today. When i try to print something nothing happens. In the Printer queue application thing in the dock, it shows the document in queue and its status is "printing". On top of the window it shows this message: 'GenericClass: waiting for device' whatever that means i assume thats the issue but have no clue what it means. I have so many things to print for uni and need to get this working again, how do i get it back to working order again??
View 5 Replies View RelatedI should have posted in this forum first as its printer related. But does anyone know how to get the above printer scanner working with snow leopard?
View 3 Replies View RelatedI have a canon mx700 printer.I just upgraded to snow leopard 10.6.8 and now my printer is no longer working.This is probably the 50th time I have had this problem. It always occurs whenever I update my apple software. I have tried reseting my settings, updating my drives and trying to connect the printer directly into my computer and over my network without any success. Upon resetting my drives I keep getting this error a communication error has occurred.
View 2 Replies View RelatedUpgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
My iMac and Canon scanner "aren't friendly" with each other. Only the very first time I succeeded to obtain my scanned doc saved as pdf. Later on the scanner simply started quitting after having scanned the doc.
View 2 Replies View RelatedI'm trying to get my Canon SmartBase MP390 to work with my Mac, and I need to be pointed in the right direction, assuming there is a right direction. Aren't there any open-source Linux drivers or something that I can use?
View 1 Replies View RelatedI was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have a Canon MP460 connected to my iMAC however I am unable to scan. I can print perfectly and would like the scan capability to work. How do I get the scan to work?
Info:
iMac
I have updated to lion and now I can't use my scanner canon N670U and phone Nokia C2-01. Is the solution now to waste lion and reset to snow leopard??
Info:
MacBook, Mac OS X (10.7.3)
After upgrading to Maverick on my 2.93 GHz Intel core 2 duo processor with 4 GB memory and a 10.9.4 version for my OS X my canon MG5220 all in one printer scanner shows as MP Navigator EX quits unexpectedly.
Info:
iMac, OS X Mavericks (10.9)
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
this canon 4400f is a fine scanner but does not have an on off button.it powers up with computer start up, but eventually powers down.how do i set preferences, etc. so it only powers up when directed?i have searched manual but found nothing.
View 1 Replies View RelatedI just bought me a brand new Canon DR-2020U, but to my dismay, I noticed that it doesn't have OS X drivers, and OS X doesn't even flinch when I connect the scanner to it.
I googled for drivers, but the official site does not say anything about those drivers. I have, of course, the Windows drivers and I can operate it through Parallels, but I feel a little stupid for paying $700 for a scanner which does not have necessary drivers to operato on my OS X.
I have downloaded Canon driver 10.51.2.0. I tried Navigator Ex 3.1 . All Apple updates have been run. I tried removing printer and bonjour scanner and reinstalling. All ng. I cannot launch from " Solutions Menu ". Printer does print. If I try and scan from image capture it scans very very slow and is not accurate. I tried connecting with a usb cable and not using the wifi. Still ng.
Info:
iMac, Mac OS X (10.6.8), Canon Mp560 Driver 10.51.2.0
I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.
Info:
iMac, Mac OS X (10.6.7)
IMac, running Mavericks, connected to a wireless network. Using a Brother MFC-J6710 printer, connected wirelessly.
Recently moved printer and computer and am connected wirelessly. This worked intermittently. I started over, reset the wireless on the printer, and got a network report that says that the printer is connected to the wireless network.
On my Mac, I have reinstalled the Cups driver, Twain driver, and wireless setup wizard. When I go into the System Preferences>Printers, and try to add the printer, the printer does not show up in the list, so there is no evidence of the printer on my Mac. Similarly, I cannot see this printer on the wireless network from my IPhone either.
Info:
iMac, Mac OS 9.0.x
I am using my HP DeskJet F4500. I connected it to my MacBook Pro 13inch mid 2012. i Added it and then i tried to print something out it doesn't print. I've went to the printer queue and i found nothing. I really need to print stuff for my homework and projects.
Info:
MacBook Pro (13-inch Mid 2012), OS X Yosemite (10.10.1)
How can I add HP Laserjet Printer in my Mac which was added in other Network PC which is window Based?
Info:
iMac, Mac OS X (10.7.3)
I've browsed the site for awhile now, but this is the first time I've had to post.
I recently tossed my old printer due to the scanner going bad, and picked up a new one. It's an Epson NX400. I've gone through the install disk, done what needs to be done, but I've got a problem.
Whenever I go to add it in the printer utility window, all I can do is highlight it. To clarify, it's showing up just fine under the 'Printer Name' section, and the 'Name' and 'Location' both fill in with the appropriate information when highlighted, but the 'Add' button doesn't become selectable.
It forces me to look through the 'Print Using' window, where the desired printer is nowhere to be found. This also happened when I tried hooking up an HP printer.
I've been scratching my head going through every support site I could find, but I'm giving up. Anyone familiar with a fix?
mainly to be used as a color scanner and to print coupons.
Info:
iMac, Mac OS X (10.7.3)
