MacBook Pro :: Display Has Been Flicking To A Black Screen But Has Gradually Been Increasing
Sep 5, 2014
Macbook pro 2014 only had it for about 2 months but recently about three weeks ago the display has been flicking to a black screen but has gradually been increasing and it now happens every two minutes - just randomly goes black for about 5 or 10 seconds and sometimes goes back to home screen but sometimes goes to log in screen, It interferes with me trying to do my work when this happens so frequently
Info:
MacBook Air, iOS 4.3.3, Transferring from Windows XP
This i dont think is serious and i am not sure what is causing the problem, basically my Alu macbook 2ghz' screen has started flicking, this has only started to happen since i installed 10.5.7 but only happens when my power adapter is in, it doesn't happen all the time but basically when i put my adapter in and the light isn't on then my screen starts to flicker.
It does stop flickering after i remove the charger and put it back in and then the light on it works.would you say its a problem with my screen/charger/something else?
my Mac started doing this a week ago. The bottom half of the screen flickers/flashes lines. If I leave it open on a flat surface and I touch the screen for a little bit, it'll go back to normal. When I close the laptop, put it in my case, and travel around with it, the next time I open it up it'll start flashing again. Â
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
I have a core i7 MBP with the high res display, and when the display is showing black, a horizontal green line appears on the screen. It is only visible when the screen is showing black or another very very dark color, and the line is not visible with the screen off. It isnt something on the screen, as rubbing it does not affect it at all. I cannot post a screenshot of it, because it does not appear in the screenshot (it does on my screen, because the line is there physically, but on other monitors it is not visible).
So I've got my MBP that I've had for about 4 months, the thing is. It just recently started to have screen flickering issues. I'll be sitting doing w/e as usual and all of a sudden the display goes dark, almost black, for a second, then comes back up again. I have yet to find any trend in when this is happening, but it is definitely happening on battery as well as plugged in, but it seems to be getting worse.any one have any idea what this could be, something I can fix on my own, or should I take it in?
Today, I bought a vga adapter for my unibody macbook and it is not working. I hooked it on a 22 inch Samsung 225MW screen and it the screen shows a message "check your cable (PC)".
I have a MacBook Pro (13'', Early 2011) & iMac (21.5", Mid 2011) using a Thunderbolt Cable to Target Display. Everything was working find and I could Command F2 to Target Display as expected.However, about a week about this stopped working. Now when I try to Target Display the iMac goes to a Black screen (like it's switching to Target Display) and the MacBook Pro does nothing. The iMac will be at the Black screen until I Command F2 again (or disconnect the Thunderbolt Cable), then the iMac goes back to the normal display. I have tried another Thunderbolt cable with no luck. I have perform all software updates on both machines (now both running 10.7.3) and fixed Disk Permissions. I have also found that restarting my MacBook Pro allows this to function as excepected (Command F2, Blue Flashing Screen, Target Display on the iMac). However, this is not an ideal situation since having to restart my computer is time consuming. Â
I have a early 2011 MacBook Pro 13" running the latest version of Lion. I have been using my MacBook with an external monitor since I brought it in 2011 and have had no problems with connecting it to my external monitor. Connected via mini display port DVI adapter and a DVI cable to a Philips monitor.
Two days ago when I plugged the MacBook back in to the monitor I connected and but now only displays a black screen, I can move the mouse off the MacBook screen and over to the external monitor and back but it is not displayed on the monitor. I have tried connecting other devices to the monitor and they work fine.
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
my macbook air 13 display only black screen and pointer when wake up from sleep. its not frequently happen. to become normal it take 10-15 sec, is it hardware problem or software problem?
I have a 2 month old 13" MBP which I absolutely love. The only hitch is that there is an oddity when connected to my Dell 2008wfp display. It only happens when I wake the MBP from sleep. A number of things happen sometimes. Usuaully, when I wake the MBP from sleep, i get a black screen on both displays and all I can see and control is the cursor. Sometimes the main display will be black, but the MBP display will show the desktop wallpaper, but again, I can only see and control the mouse cursor. It should also be worth mentioning that the keyboard is rendered non-functional as well.
Sometimes, OS X will appear on both displays, with mouse cursor active, keyboard inactive, but I am unable to click anything or interact with anything OS X.
Anyway, I'm at the point where I need to mention this because it happens quite frequently and its getting rather annoying. The only way I can get out of this hang, is to cold reboot the machine. It happens everyday and at least 50% of the time I wake the MBP from sleep. When not connected to the display, I never get this occurrence. Also, this display worked perfectly when I used to own the classic 15" MBP, so its hard for me to pinpoint what exactly is the anomaly that is happening.
Anyone else experiencing this same issue? I am using a mini display port to DVI adapter to the Dell display.
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
My Mac Book Pro just stopped accepting commands, the screen is freezing on a black screen and the keys have no bearing on the situation. The only way I can get it to stop is pull the battery out. It has been acting funny lately.
Info: MacBook Pro (17-inch Early 2008), Mac OS X (10.5.6), final cut express
I've noticed that when my rMBP (late 2013, Mavericks) turns off the display automatically while on battery (as configured via Energy Saver) and I try to wake it immediately, I get a black screen with the cursor, rather than my password/unlock screen. It remains a black screen, with the cursor moveable, for 5-10 seconds or so, and then the password/unlock screen will appear as usual.Â
This does not happen if:I don't try to wake the display/computer immediately after automatic display sleep (e.g., I wait 5-10 seconds and it's fine)I turn off the display using a hot corner and immediately wake the displayI put the computer to sleep by closing the lid and immediately wake it by opening the lidI select Sleep from the System/Apple menu and immediately wake it by pressing a key or clicking on the trackpadÂ
Why automatic display sleep is causing this temporary black screen? I currently get around it by setting the time for automatic display sleep while on battery to 10 minutes instead of the default 3 minutes to minimize the chances of needing to immediately wake the screen. I'd like to keep it at 3 minutes if possible to maximize energy savings, but the temporary black screen is really annoying if I didn't really want display sleep and consequently have to wake immediately.
I have a Mac Pro (Early 2008) running on 10.5.8 OSX with apple 20" display and 16G RAM.
Initially started with my MACPRO not waking up from sleep and has to force the shut down with power button. Finally realised it was due to my Epson scanner connected via USB...
The main issues now is with the display, black screen on startup. I can still control the volume and disk eject/close, just no display. Force shut down with power button numerous time but futile. Finally solved it with SMC reset.
it becomes an on and off issues... and continuously I solved it with SMC reset.... sometimes needed 2 or 3 resets to get it to work,and finally for the past few days... SMC reset can't solve it either... no display on startup, and same thing I can control the volume and disk eject/close. Have tried my monitor on other mac and it worked fine.
Now this is strange. if I let the mac cool off totally,after a SMC reset. the display will comes up fine...
I was browsing the internet, not doing anything major, put the computer to sleep, came back 10 minutes later... black screen. I messed with it for an hour or so and determined that the video card went bad (I'm guessing. It's a mid 2007 macbook pro with the nvidia geforce 8600m. My secondary monitor remains black as well). In the midst of totally freaking out, I decided to activate the voiceover utility, enable screen sharing (after figuring out a slew of keyboard commands I didn't know about), and logged in from my girlfriends computer.
I immediately closed all the windows and applications that I had inadvertently opened during the blind wtf session, and opened up system profiler to see if it is recognizing a video card. Well, it is! It's listing the video card as a GMA x3100! Is there a secondary card in there? Cause if there is, it's not working either. Or is that just a default they would put in if it doesn't recognize a video card? Doesn't seem likely. Or, because I'm using screen sharing, is it picking up my girlfriends card? It's not, because she's using a GMA 950. Maybe it's splitting the difference?
Ive got a hd cinema display 23 inch wich stopped working last week.The power led is on, not giving a code or anything.I'm not affraid to open it, it is allready. But i dont see obvious black smoked parts
When I shine on the screen with a flashlight or something, I dont see images. so I dont think its the inverter.Was hoping someone here might know more?Perhaps logic board? not sure what that does btw
For the past few weeks it has been going to a black screen when trying to wake it up from sleep. Either I've put it through too much work lately editing all these photos and its really tired. So, often it wakes up normally and functions fine, well, not really. It is seemingly very slow. It requires a lot of time (more than before) to open up a program or it gives me the "spinning wheel of death" when trying to go to a different page on the internet or open up a folder on my desktop. Amongst other things that require it to think. So It's just a lot slower in general than before.
So for the first time in over a year since I purchased it, my iMac crashed twice.The first time was this morning, i went to do something and the screen went black, and my secondary display got black and white lines. I had to restart. And the boot screen with the apple logo hung around for a while.
Then, later on the screen went whacky after trying to wake it from sleep (not full sleep just display sleep) and had a bunch of moving lines and then I couldn't see anything. So luckily I got a picture. After restart, it seems fine.I'll call apple care in the morning, but thought i'd try my luck here.
I have a Macbook Pro 2.2 Santa Rosa Rev. D model. Recently I have discovered gray dots appearing along the top of my screen.
A few at first, but masses growing are growing rapidly. In the past 3 weeks the problem has started to spread to both my right and left edges as well. Under different viewing angles the dots sort of dissapear. The dots are not uniform in size or pattern.
I have a slight feeling that this has to do with my NVIDIA 8600GT graphic card.
I read tonight that that specific card was reported faulty and thousands have had problems and have had to get their logic boards replaced.
I also read that Apple extended their warranty for this specific reason.
Anyways, the dots are increasing and it's worrying me as I am not sure if this will be covered or not.
These lines are 1cm apart one another, and are almost invisible, but their "flicking" it's really noticeable and quite annoying working as a graphic. It has less than 2 years but they say that the warranty it's over, even if by law it should be at least 2 years, it's obviously ah hardware problem, so I'm quite sure it's a display problem and probably should be replaced.
Info: iMac, Mac OS X (10.6.8), Less than two years of life
I have a Macbook Air and the new 13" macbook pro. I see that the Macbook Air is much brighter than the 13" macbook pro (under the same ambient lighting, both set to maximum brightness). I was told the reason for this difference is because of the lack of the glass layer on the Air. Is that really true ? If so, can you please let me know if I'd be able to get the same brightness I get on the Air on the Pro also by just removing the glass layer on my 13" macbook pro. TechRestore offers such a service for $134, which is simply a subset of their service for matte replacement (I don't want the matte replacement as I like the glossy screen). But since such a service would void my warranty and return policy, I want to be really sure before getting it done with them. I'd greatly appreciate any inputs/advice.
why does my illuminated keyboard keep flicking between being on and off, also sometimes when I go to turn it on there is a symbol indicating that that function is not available?
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
I'm running osx 10.5 off a intel mac mini through a samsung syncmaster 920nw.the native resolution is 1440x900 60hz
i'm a designer, and often i find that i simply don't have enough screen space, is there any way that i can increase the resolution, display preferences don't give me that option, i've downloaded software called switchresx, but i can't seem to get the resolution right and also the software expires eventually.
I was wondering if/where I could get a better screen for my 12.1" Powerbook... Better viewing angle, brighter, possibly glossy. OR is there a way to bump up the screen brightness by just putting more juice in it? I know it would hurt battery life, but while it's plugged in it wouldn't hurt.
