OS X Mavericks :: Restore Volume Of Third Partition To Macintosh HD Volume
Aug 23, 2014
I recently decided to increase the volume of my bootcamp disk, which I had done in the past using a method which ultimately made the disk unrecognizable. This time around I used Winclone to create an image of my bootcamp disk. I was not sure exactly how Winclone worked and to be safe I decided to keep the Bootcamp disk I had, and I created a third partition of a larger volume to which I restored the bootcamp image. Everything worked fine obviously, and the image was restored correctly to the new larger volume. The dilemma is I had two bootcamp disks, so I erased the smaller volume because I no longer needed it. Currently I am trying to restore this empty space within the main disk to the Macintosh HD. Disk util looks like:
I know I can just create a backup of the macintosh HD, another image of the bootcamp disk, and format the disk and start over, but I am hoping there is an easier way to go about this; considering there has been a method engineered such that I can just drag that corner of the mac HD and voila I have instantly more storage after applying, it seems viable that there is something that can be done rather than formatting my disk, unless the necessity for that of course was overlooked.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
View 4 Replies
ADVERTISEMENT
Jun 23, 2014
I have a 3 TB disk that I used for video files that I now want to use for backup. So I wanted to erase and partition the drive to wipe it clean. So after going into Disk Utility and "trying" to erase and partition the drive, it now only shows the drive and no volumes.I cannot create or partition volumes. I tried verifying and repairing the disc but that didn't do anything. The only buttons available are Verify, Info and Burn. What do I do to use the drive again?
View 2 Replies
View Related
Aug 26, 2014
My 2012 MacBook Pro got stuck on the screen with the apple logo and spinning wheel after I tried restarting it.i haven't updated it recently and it was working fine before I restarted it. I did command-r when restarting and when trying to repair the disk I got the following message:
Checking file system
checking journaled HFS Plus volume
checking extents overflow file
checking catalog file
keys out of order (red)
rebuilding catalog B-tree
The volume macintosh hd couldn't not be repaired (red)
volume repair complete
updating boot support partitions for the volume as required
error:disk utility can't repair this disk....disk, and restore your backed-up files (red)
what do i do?? is my computer crashed?
Info:
MacBook Pro
View 1 Replies
View Related
Oct 20, 2009
I have a Mac Pro and not too long ago I swapped from a fat, heavy and filthy white Apple Keyboard to a new skinny silver one. I like it, and also love that the F7-9 Skip Back-Pause/Play-Skip Forward keys work for iTunes, even when another app is active (what's the word I'm looking for - in focus or whatever). But I use Optical output, so the volume keys (F10-12) don't do anything. I know that, when iTunes is the active app, I can command-+/- to change the volume, but I'd love to be able to map the F10-12 keys to do that - without having to have iTunes active (playing, but not the active window).
View 1 Replies
View Related
Mar 9, 2010
Recently, my newer (last year) iMac probably running 10.5 started speaking and wont shut up... there is no obvious way to turn it off. I usually figure problems out myself but there are no system preferences that effect it. I even changed the voice in preferences as a test and it is still the same guy reading everything clicked in all applications except when I am in system preferences so far. Usually when I run into a dead end like this there is some mystery key command that works... anyone know?I also noticed that some of the top line (f) keys are not doing what they are supposed to any longer as well... volume up opens the window for expose & spaces it looks like and does not control the volume monitor brightness controls are not working either... I went to the key and mouse preferences and set the key strokes to default and still the same.
View 6 Replies
View Related
Aug 10, 2009
I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
View 2 Replies
View Related
Dec 14, 2008
I was wondering if anyone knows how to do this- it is a pita to adjust separate volume controls on everything. If I adjust the volume on the keyboard, the volume slider in itunes doe snot move. If I set the volume on itunes with a mouse, then come home and use the volume controls on my keyboard, I have to also manually adjust the slider in itunes. Anyway to link the two?
View 3 Replies
View Related
Jan 3, 2010
I was wondering: I want to upgrade from 10.5 to 10.6 by doing a complete wipe and install. I have Time Machine running, but I don't want to restore from that. I will have a SuperDuper clone as archive of the 10.5 installation, from which I can copy all the files that I still need. I would like to use the same volume for Time Machine in 10.6 as I did in 10.5.
Can I do this without wiping all the TM-data from the 10.5 install?I don't mind losing the oldest data from 10.5 to accomodate for the new data from the 10.6 install. But it would be nice to have the backups from the old install for as long as possible, just in case I've done something stupid but haven't realised it yet. (That's the whole point of Time Machine, right?)
I've been searching around, but I can't find anything that describes this particular use of the system. Most posts and articles are about restoring an installation using the Time Machine backup data, or accessing back-up data on a different volume.
View 21 Replies
View Related
Dec 13, 2009
My PowerPC G4 crushed. After repairs, I installed 10.4.11. I have 512 MB DDr SDRAM. The problem is the following: I noticed there are two volumes on my desktop. One, with about 7 GB is where the system is. The other contains about 63 GB with a some files in it. I went to update my system but it asks for more memory. I am guessing the 63 GB volume is not recognized.
View 3 Replies
View Related
Jun 6, 2012
Using MacBook Pro with 10.7.4 installed. I am running Disk Utility. I Chose First Aid, selected the volume Macintosh HD, and verify. It says: Verifying volume "Macintosh HD" Checking file system The swirly bar is running in the lower right hand corner... it's been doing this for many, many hours.
What else can I do?
Info:
MacBook
Pro, Mac OS X (10.7.2)
View 2 Replies
View Related
Jun 29, 2009
Before I get flamed and etc... I have google and done some research about this issue but cannot find much about it.
I am not sure if this is a very common issue or topic but how do you adjust or modify your apple keyboard so that you can adjust screen brightness or volume? I am currently running Windows XP SP3, on a 2.4Ghz Unibody Macbook.
View 3 Replies
View Related
Aug 31, 2014
When I use the F11, 12 buttons, the pages go away or the dashboard comes up. I've tried to change the settings but that didn't work either
Info:
MacBook Pro with Retina display
View 1 Replies
View Related
Jun 18, 2012
i have a boot install of windows xp and windows 7 on two separate HD's in my mac pro and i would like to consolidate these (along with my primary mac OS) onto one single drive.
can i migrate these somehow to a new partitioned drive?
Info:
Mac Pro, Mac OS X (10.6.8), 10.6.8 with 64 bit Win7 in Parallel
View 2 Replies
View Related
Mar 10, 2008
I have XP running beautifully on a 150 GB Raptor (via bootcamp). I'm thinking of adding Vista, but I'd like to avoid formatting the drive and creating two partitions for XP and Vista.
Can I slice off some of the 150 GB for Vista leaving XP intact?
View 1 Replies
View Related
Jun 6, 2009
I have 2 partitions on my MacBook drive. One is OS X Leopard, and the other is a Windows XP Bootcamp Partition (FAT32). When I made the Bootcamp partition, I cloned up my OS X partition to a USB drive (using Carbon Copy Cloner), replaced the OS X partition with the clone (to defragment it), and then partitioned it using Bootcamp. I decided I wanted a larger Windows XP Bootcamp Partition, and so I removed the partition using Bootcamp, recloned and replaced the OS X partition with the recloned backup (to defragment it, once again), and then used Bootcamp again to partition it, this time with a larger partition size. The first time I partitioned it, everything worked great. Ever since the second time, though, when I hold option during startup to change boot volumes, the volume that once said "Macintosh HD" now says "EFI Boot." Also, my OS X partition is no longer the default partition, and when I lookt at the Startup Disk in the System Preferences, my OS X partition is not listed among them. This is the same when I look at the "Startup Disk" preferences on the Windows XP partition, using the Boot Camp application, and when I click "Startup in Mac OS X," I get the error: "Could Not Locate Mac OS X Volume."
I had been ignoring the problem, simply holding option on startup and choosing the "EFI Boot" volume. This was working fine until today, when I finally came around to updating OS X. I ran Software Update, which told me I had to restart my computer. When I did, it went through the whole updating progress bar screen for a while, and then restarted the computer. When the computer restarted, it restarted in Windows XP, so I shut down the computer, booted it up, and held option. I chose "EFI Boot" when I was given the choice, and it started booting to my OS X partition. About a minute or two after I chose "EFI Boot," the computer unexpectedly rebooted into Windows XP again. I restarted the computer, again holding option and choosing "EFI Boot," and again it unexpectedly restarted. How can I get back into my OS X partition? Is there a way I can clone my OS X partition and replace it like I've done in the past? (Note: I have MacDrive 7, and have seen an option for backing up drives on there in the past, but have never used it.) Why is my OS X partition showing up as "EFI Boot"
View 11 Replies
View Related
Apr 15, 2012
I lost an external hard drive due to failure. Luckily, I found out that for some reason Time Machine had backed up the drive's volume along with my startup internal drive.Now I just want to restore that lost drive's volume folder from Time Machine to a NEW external drive. However, I imagine that if I merely click "Restore" from Time Machine app it will attempt to put this volume (which is 100GB) onto my internal drive.
Is there a way to direct the location of the restore of that volume folder to my new external drive? Or can I just go into my Time Machine Backup drive and drag and drop the volume contents from the Time Machine volume onto it?
Info:Mac Pro, Mac OS X (10.6.8), Quad Core, Intel Xeon
View 1 Replies
View Related
Jun 18, 2012
I wanted to unzip a file with BetterZip. It said there exists another file with the same name.I answered it's question if I want to replace or unzip this file to another place just with replace.But the result was that the whole content of the folder where the file should be extracted to, was deleted by BetterZip.The volume on which that happened is not my start / system volume, it's a separate volume only with data.
1.) Exists a way to see a list of the files which were deleted ? (Because I don't know if there was something really important inside.)
2.) Is there a terminal command or another method to get these files back to that folder ?
Info:Mac Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
Feb 5, 2010
I reinstalled Snow Leopard on a new volume, transferred stuff I wanted from the old volume to the new volume, and deleted the old one. In disk utility, I have not been able to stretch the volume to fit where the old one was. I can't change the volume scheme. Has anyone got a method to let me use my full 160GB hard drive rather than half of it? Or maybe software that can alter it.
View 2 Replies
View Related
Aug 5, 2010
I am trying to resize the bootcamp partition on my iMac. I opted for the 32gb option when I first ran bootcamp but I wanted to add more. I read online I could do this my shrinking the Mac HDD and then creating a new partition FAT32. Then open up windows and open up disk management. Then right click my bootcamp hdd and click "extend volume." however, that option is greyed out. Am I missing something or is there some other technique?
View 1 Replies
View Related
Jul 19, 2008
I purchased a new hard drive, my second Samsung 750 GB. My first one is partitioned, half for OSX half for Vista. Ultimately, I want to have a hard drive per operating system.
At first I thought the way to go for this, based on some stuff I read here on Mac Rumors was to use winclone to clone the windows partition,restore it to the new drive, and then I don't know what.I did the restore, there were errors in the log though..something about the wrong kind of partition. Basically it's become a pain in the ass, and I'm thinking there has to be an easier way.
It occurred to me, I might be able to use "Install and Archive" to move the boot volume to the new disk, moving the user files and network settings with it. If I did this would I be able to expand the windows partition using winclone utilizing the full hard drive? Or could moving the boot volume to the new disk mess up my Windows partition?
View 3 Replies
View Related
Jul 2, 2010
Now, I set up a partition to run Ubuntu on my MacBook, but now I want to remove that partition to make room for Windows XP. When I go to Boot Camp Assistant, I try to click 'Continue' but it gives me this: I thought I could fix the problem using Disk Utility, but I couldn't understand what I could do. I thought it would work by erasing them, but I may have made the problem worse. Here is what it looks like: I tried booting the Ubuntu disc as I read I could remove the partition using that, but I don't understand how that would work.
View 2 Replies
View Related
Sep 2, 2014
Been dealing with some issues, thought I'd try for a clean install of Mavericks. I get a message that Mavericks cannot be installed on this volume. I have a brand new 2.8 GHz MacBook Pro, when I received it I just do what I've done many times before and used Carbon Copy Cloner to copy my old boot volume on to the new computer. I did, however, partition the drive (1 TB SSD) into manageable and useful segments. The message I'm getting I feel is saying that this computer doesn't use Mavericks, or the version I have (from the App Store).
Info:
MacBook Pro (Retina, 15-inch, Mid 2014), OS X Mavericks (10.9.4), 16 GB RAM - 1TB SSD - SuperDrive
View 6 Replies
View Related
Jun 26, 2014
in my office I've a network hard drive mounted volume on /Volumes/guest-share, when I try to open directory I get an error:
"The folder can't be opened because you don't have permission to see its contents"
imac:/ roccoverrastro$ ls -AOel /Volumes/
total 56
-rw-r--r--@ 1 roccoverrastro admin - 6148 26 Giu 00:33 .DS_Store
[Code] .....
View 3 Replies
View Related
Aug 24, 2014
I use the following setup:SSD: SystemInternal HDD: Data (Documents, Music, etc.)Both disks are encrypted via the Core Storage utility.It seems I can't mount the "Data" disk anymore.I wanted to download a random pdf which failed. ("Downloads Folder" is on "Data" Volume) Restarted the machine and now all aliased folders which refer to the "Data" volume have a question mark overlay rendered on their icon.It's not possible to mount/unlock the "Data" disk through disk utility a. The "Data" volume is, according to DiskUtility quite full (only 16MB left). I have the suspicion that this small amount of space left in combination with the encryption causes some trouble.What to do?
+-- Logical Volume Group 5898542B-F53F-46A6-B529-C31152081292
=========================================================
Name: Data
Status: Online
Size: 499763888128 B (499.8 GB)
Free Space: 16777216 B (16.8 MB)
|
+-< Physical Volume C6AAFA40-7F30-40C3-BC1E-A71A3C3DA757
[code]....
Info:
MacBookPro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 1, 2014
Ran TechTool Pro 7 suite of tests and found no problems. When I tried to optimize the drive, it was not allowed. Message says the volume directory is fragmented.
OS X 10.9.3
Info:
iMac, OS X Mavericks (10.9.1)
View 1 Replies
View Related
Aug 30, 2014
On attached volumes I cannot save files. I recently used OS X migration assistant to move to my new iMac but the volumes that I used on the old system will not allow me to save to them (the os says it's a permissions problem). Short of renaming the new computer the same name as the old one.
Info:
Mac mini, Mac OS X (10.6)
View 4 Replies
View Related
Aug 29, 2014
I use Disk Utility (stand alone, on a USB key) to make backups of my system disk to an external disk and then transfer it from my home system to a MacBook and vice-versa when I need to travel.
Recently, I upgraded from 10.9.2 to 10.9.3 and, not long later, to 10.9.4. In the same period, I also had an increase (not a very big one, just a few GB, less than 15) in the occupied space of that system disk. The current amount of data on it is 164.64 GB.
I'm not sure if my problem comes from the sub-version upgrade, from the increase in data size, from both, or from something else. The home computer is an iMac with a 318.88 GB internal disk. The MacBook has a 500 GB internal disk. The partitions used on the external disk to make bootable backups are 400 GB big.
I can backup both internal disks to the external partitions (and boot on the resulting external disk when I check that it is usable). I can also copy the external backups to the MacBook system disk and boot on the result without problem.
But, recently, Disk Utility has started to refuse copying the content of the external backup partitions to the internal disk of the home system. It says there is insufficient space on the target volume. If the error message is correct, it means that I cannot backup 164.64 GB of data on a 318.88 GB volume!
For the record, the external backup partitions are OK when verified with SOS.
Info:
iMac, OS X Mavericks (10.9.4), 4 GB memory
View 14 Replies
View Related
Aug 20, 2014
I needed to change my backup volume's name. Now it's not recognized by TimeMachine any more. It seems I can only choose this volume again AND delete older backups, which I do NOT want.
How can I just continue on this volume with its new name?
View 3 Replies
View Related
Jun 22, 2014
I had to downgrade from the second Yosemite beta in order to run one of my applications for work that didn't run on Yosemite. I've successful reinstalled Mavericks to the chagrin of finder not working at all. Whenever I mount a DMG I get "Finder cannot open files in the “volume” format." Also, whenever I click to open a folder or a new window in finder, it just crashes and relaunches. I'm going to try to do a fresh install of Mavericks and recover from a backup.
I also had to regain admin privileges for my user which I have done successfully.
View 1 Replies
View Related
Aug 22, 2014
iMac (late 2012) will not wake from sleep unless I press on/off button. Then the Mac freezes and two messages pop up telling me I have not ejected properly my two external devices 1. 500G HD and 2. 16G Flash Drive.
Info:
iMac (21.5-inch, Late 2012), OS X Mavericks (10.9.4), Disk Warrior does not alleviate pro
View 1 Replies
View Related
