MacBook Pro :: Mavericks Cannot Be Installed On This Volume
Sep 2, 2014
Been dealing with some issues, thought I'd try for a clean install of Mavericks. I get a message that Mavericks cannot be installed on this volume. I have a brand new 2.8 GHz MacBook Pro, when I received it I just do what I've done many times before and used Carbon Copy Cloner to copy my old boot volume on to the new computer. I did, however, partition the drive (1 TB SSD) into manageable and useful segments. The message I'm getting I feel is saying that this computer doesn't use Mavericks, or the version I have (from the App Store).
Info:
MacBook Pro (Retina, 15-inch, Mid 2014), OS X Mavericks (10.9.4), 16 GB RAM - 1TB SSD - SuperDrive
View 6 Replies
ADVERTISEMENT
Aug 23, 2014
I recently decided to increase the volume of my bootcamp disk, which I had done in the past using a method which ultimately made the disk unrecognizable. This time around I used Winclone to create an image of my bootcamp disk. I was not sure exactly how Winclone worked and to be safe I decided to keep the Bootcamp disk I had, and I created a third partition of a larger volume to which I restored the bootcamp image. Everything worked fine obviously, and the image was restored correctly to the new larger volume. The dilemma is I had two bootcamp disks, so I erased the smaller volume because I no longer needed it. Currently I am trying to restore this empty space within the main disk to the Macintosh HD. Disk util looks like:
I know I can just create a backup of the macintosh HD, another image of the bootcamp disk, and format the disk and start over, but I am hoping there is an easier way to go about this; considering there has been a method engineered such that I can just drag that corner of the mac HD and voila I have instantly more storage after applying, it seems viable that there is something that can be done rather than formatting my disk, unless the necessity for that of course was overlooked.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
View 4 Replies
View Related
May 31, 2012
Ive recently had to re-install Tiger after being told that there was an error in the startup volume. I am far from computer savy so I just basically follow instructions Sadly, after doing so Ive been experiencing problems with my iPod nano & iTunes. I can sync but the songs put onto my iPod look gray instead of black. And, when I disconnect my iPod says there arent any songs on it. When I look at Music in Finder I noticed that I get a few items listed more than once. I was wondering if this could be the reason for my iPod issues.This is what Im looking at: (all the ones that are bold & underlined have the folder icon next to them)
[code]...
Info:
PowerBook, Mac OS X (10.4.11)
View 1 Replies
View Related
Jun 4, 2014
I have a late 2008 model macbook pro and the resent update to 10.9.3 has made my screen dim, keyboard backlight dim, and volume special functions to stop working?
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 5 Replies
View Related
Jun 26, 2014
in my office I've a network hard drive mounted volume on /Volumes/guest-share, when I try to open directory I get an error:
"The folder can't be opened because you don't have permission to see its contents"
imac:/ roccoverrastro$ ls -AOel /Volumes/
total 56
-rw-r--r--@ 1 roccoverrastro admin - 6148 26 Giu 00:33 .DS_Store
[Code] .....
View 3 Replies
View Related
Aug 24, 2014
I use the following setup:SSD: SystemInternal HDD: Data (Documents, Music, etc.)Both disks are encrypted via the Core Storage utility.It seems I can't mount the "Data" disk anymore.I wanted to download a random pdf which failed. ("Downloads Folder" is on "Data" Volume) Restarted the machine and now all aliased folders which refer to the "Data" volume have a question mark overlay rendered on their icon.It's not possible to mount/unlock the "Data" disk through disk utility a. The "Data" volume is, according to DiskUtility quite full (only 16MB left). I have the suspicion that this small amount of space left in combination with the encryption causes some trouble.What to do?
+-- Logical Volume Group 5898542B-F53F-46A6-B529-C31152081292
=========================================================
Name: Data
Status: Online
Size: 499763888128 B (499.8 GB)
Free Space: 16777216 B (16.8 MB)
|
+-< Physical Volume C6AAFA40-7F30-40C3-BC1E-A71A3C3DA757
[code]....
Info:
MacBookPro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 1, 2014
Ran TechTool Pro 7 suite of tests and found no problems. When I tried to optimize the drive, it was not allowed. Message says the volume directory is fragmented.
OS X 10.9.3
Info:
iMac, OS X Mavericks (10.9.1)
View 1 Replies
View Related
Aug 30, 2014
On attached volumes I cannot save files. I recently used OS X migration assistant to move to my new iMac but the volumes that I used on the old system will not allow me to save to them (the os says it's a permissions problem). Short of renaming the new computer the same name as the old one.
Info:
Mac mini, Mac OS X (10.6)
View 4 Replies
View Related
Aug 20, 2014
updates could not be installed because the application mail canceled restart OS X 10.9.3 (13D65)
Info:
iMac, OS X Mavericks (10.9.3)
View 2 Replies
View Related
Aug 29, 2014
I use Disk Utility (stand alone, on a USB key) to make backups of my system disk to an external disk and then transfer it from my home system to a MacBook and vice-versa when I need to travel.
Recently, I upgraded from 10.9.2 to 10.9.3 and, not long later, to 10.9.4. In the same period, I also had an increase (not a very big one, just a few GB, less than 15) in the occupied space of that system disk. The current amount of data on it is 164.64 GB.
I'm not sure if my problem comes from the sub-version upgrade, from the increase in data size, from both, or from something else. The home computer is an iMac with a 318.88 GB internal disk. The MacBook has a 500 GB internal disk. The partitions used on the external disk to make bootable backups are 400 GB big.
I can backup both internal disks to the external partitions (and boot on the resulting external disk when I check that it is usable). I can also copy the external backups to the MacBook system disk and boot on the result without problem.
But, recently, Disk Utility has started to refuse copying the content of the external backup partitions to the internal disk of the home system. It says there is insufficient space on the target volume. If the error message is correct, it means that I cannot backup 164.64 GB of data on a 318.88 GB volume!
For the record, the external backup partitions are OK when verified with SOS.
Info:
iMac, OS X Mavericks (10.9.4), 4 GB memory
View 14 Replies
View Related
Jun 23, 2014
I have a 3 TB disk that I used for video files that I now want to use for backup. So I wanted to erase and partition the drive to wipe it clean. So after going into Disk Utility and "trying" to erase and partition the drive, it now only shows the drive and no volumes.I cannot create or partition volumes. I tried verifying and repairing the disc but that didn't do anything. The only buttons available are Verify, Info and Burn. What do I do to use the drive again?
View 2 Replies
View Related
Aug 20, 2014
I needed to change my backup volume's name. Now it's not recognized by TimeMachine any more. It seems I can only choose this volume again AND delete older backups, which I do NOT want.
How can I just continue on this volume with its new name?
View 3 Replies
View Related
Jun 22, 2014
I had to downgrade from the second Yosemite beta in order to run one of my applications for work that didn't run on Yosemite. I've successful reinstalled Mavericks to the chagrin of finder not working at all. Whenever I mount a DMG I get "Finder cannot open files in the “volume” format." Also, whenever I click to open a folder or a new window in finder, it just crashes and relaunches. I'm going to try to do a fresh install of Mavericks and recover from a backup.
I also had to regain admin privileges for my user which I have done successfully.
View 1 Replies
View Related
Jun 21, 2014
I've installed a program on my 2008 Mac Pro (Mavericks) called CyberViewX, which is an application for a 35mm film scanner I recently purchased, a PrimeFilm XE. The program is actually installed in the TWAIN directory tree on the Mac. (Library/Image Capture/TWAIN Data Sources)
When I log on to a "regular" admin level account (that is, the account does have administrative privileges) the program will not run; it thinks for a bit, and then says "please run as administrator"
If I open a terminal window, drill down to the program executable (it's actually buried quite deeply in the application's directory tree, but no matter), and run the program with a sudo command (sudo ./CyberViewX) and enter my admin password when prompted, the program runs fine.
Is there an easier way to do this - that is, to have the program always run with "administrator" privileges, so I don't get the error message. If nothing else, the program is also invoked by other software that came with the scanner; these programs will not work, because they use CyberViewX to actually acquire images, and CyberViewX gives the same "Please run as administrator" error message .
View 4 Replies
View Related
Aug 22, 2014
iMac (late 2012) will not wake from sleep unless I press on/off button. Then the Mac freezes and two messages pop up telling me I have not ejected properly my two external devices 1. 500G HD and 2. 16G Flash Drive.
Info:
iMac (21.5-inch, Late 2012), OS X Mavericks (10.9.4), Disk Warrior does not alleviate pro
View 1 Replies
View Related
Aug 27, 2014
When I try to upgrade my Macbook pro (Late 2011) from lion to Mavericks, the computer restarts and begins to download the new OSX, but then I get a message saying the download failed because OSX can't be installed because a recovery system can't be created. What can I do in order to get Mavericks to work on my computer?
View 3 Replies
View Related
Aug 31, 2014
When I use the F11, 12 buttons, the pages go away or the dashboard comes up. I've tried to change the settings but that didn't work either
Info:
MacBook Pro with Retina display
View 1 Replies
View Related
Aug 23, 2014
When I install new applications on my MacBook Pro, the icons are missing and instead, showing the generic "App" icon.
Info:
MacBook Pro, Mac OS X (10.5.4)
View 2 Replies
View Related
Sep 3, 2014
I installed the Mavericks 10.9.4 Update a couple of months ago, and it has reappeared in the App Store. I went ahead and reinstalled just in case there was a legitimate issue with my files, but the update continues to appear in the App Store updates section. Rebooting does nothing to change matters. How to shut off this message display?
Info:
iMac, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Aug 25, 2014
I recently restored my iMac from a time machine backup and it looks like Messages didn't install correctly. Basically, the app is blank, displaying no messages or options in the menu bar (see album: [URL]). Looking for a possible solution without installing a fresh OS.
Info:
iMac, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Sep 8, 2014
For some reason safari isn't recognising flash player or silverlight plug-ins despite uninstalling an reinstalling (seemingly successfully) a couple of times. I was prompted a couple of weeks ago to update flash player, and having done this I am unable to use it at all. In addition my netflix account prompted me to download silverlight (must have been previously present) and since will not play any netflix films at all. Im running an iMac intel on 10.9.4.
Info:
iMac, OS X Mavericks (10.9.4), intel
View 4 Replies
View Related
Sep 5, 2014
One day ago I allowed remote access control to my Mac Book Pro OS10.9.4 to a company pretending to be Apple Authorized Online Services. After discovering this was a scam I need to be sure that they didn't leave or installed any app (hidden or not) and if so, how to delete it to prevent them to access my Mac again.
It would also be useful if there is a way to find out which information they may have accessed during the mentioned "session".
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Oct 20, 2009
I have a Mac Pro and not too long ago I swapped from a fat, heavy and filthy white Apple Keyboard to a new skinny silver one. I like it, and also love that the F7-9 Skip Back-Pause/Play-Skip Forward keys work for iTunes, even when another app is active (what's the word I'm looking for - in focus or whatever). But I use Optical output, so the volume keys (F10-12) don't do anything. I know that, when iTunes is the active app, I can command-+/- to change the volume, but I'd love to be able to map the F10-12 keys to do that - without having to have iTunes active (playing, but not the active window).
View 1 Replies
View Related
Mar 9, 2010
Recently, my newer (last year) iMac probably running 10.5 started speaking and wont shut up... there is no obvious way to turn it off. I usually figure problems out myself but there are no system preferences that effect it. I even changed the voice in preferences as a test and it is still the same guy reading everything clicked in all applications except when I am in system preferences so far. Usually when I run into a dead end like this there is some mystery key command that works... anyone know?I also noticed that some of the top line (f) keys are not doing what they are supposed to any longer as well... volume up opens the window for expose & spaces it looks like and does not control the volume monitor brightness controls are not working either... I went to the key and mouse preferences and set the key strokes to default and still the same.
View 6 Replies
View Related
Aug 10, 2009
I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
View 2 Replies
View Related
Aug 27, 2014
I have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.
The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.
Info:
MacBook Air, OS X Mavericks (10.9.4)
View 10 Replies
View Related
Dec 14, 2008
I was wondering if anyone knows how to do this- it is a pita to adjust separate volume controls on everything. If I adjust the volume on the keyboard, the volume slider in itunes doe snot move. If I set the volume on itunes with a mouse, then come home and use the volume controls on my keyboard, I have to also manually adjust the slider in itunes. Anyway to link the two?
View 3 Replies
View Related
Jun 29, 2009
Before I get flamed and etc... I have google and done some research about this issue but cannot find much about it.
I am not sure if this is a very common issue or topic but how do you adjust or modify your apple keyboard so that you can adjust screen brightness or volume? I am currently running Windows XP SP3, on a 2.4Ghz Unibody Macbook.
View 3 Replies
View Related
Dec 5, 2010
Installed a new 750GB drive into my MacBookPro 5.1 Couldn't get Winclone to make image so I was forced to start from scratch with a new XP installation.
My MBP is partitioned 25%Mac & 75%XP with bootcamp and I have the old drive in a enclosure connected with a firewire. So all of old files are on the external drive now.
After installing XP I have no internet connection, drivers etc... However if I boot up on the mac side everything works fine. (I cloned the mac os already with Carbon copy).
So can I just copy all my old drivers over to the new drive? If yes how and if no how do I get them installed on the new harddrive. The MBP came with everything preinstalled.
View 9 Replies
View Related
May 25, 2012
I have a legal copy of iWork 09 installed via CD-ROM, it does not appear as "installed" in the app store.
Info:
MacBook, iOS 5.1.1
View 2 Replies
View Related
