OS X :: New HD Not Showing Up In Disk Utility - This Volume Is The Startup Volume And Cannot Be Erased
Aug 10, 2009
I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
Updating my hard drive to SSD. The first line is right on it's place: it tells the name for my SSD (which is: 1Tb Samsung EVO) On the picture below is shown the second line that is missing when the ssd is installed.Does this mean that MAC can't recognise the drive?Does it work properly?
I have 43GB available on a 120GB drive on my MacBook base model and I'm trying to partition via BootCamp.I'm trying to allocate 32GB to the Windows partition but I keep getting the following error message:Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Now I've backed up my disk and launched disk utility, and try to follow above directions here but the Mac OS Extended (Journaled) area is grayed out and when I click apply after highlighting the MacBook are (in blue), it errors out and says the disk is out of space.
I have to do a back up (I'm cutting in Avid) on this FAT32 volume (for interoperability it is formatted this way), but I can't mount it via the Disk Utility or the 'mount' command in Terminal (it doesn't list the device, despite seeing it in Disk Utility - the volume is greyed out).The drive is connected via Firewire 400 and 800, USB is not available (to few slots).
On one of our MacBook Pros (Late-2011), running the latest OS X 10.7.3, Disk Utility says the volume needs to be repaired. When I use Disk Utility from the Recovery HD, it says the volume appears to be OK. I verified by using fsck in single-user mode, and it found no problems either. Which do I believe? Is this a sign of a soon-to-fail hard drive?
I reinstalled Snow Leopard on a new volume, transferred stuff I wanted from the old volume to the new volume, and deleted the old one. In disk utility, I have not been able to stretch the volume to fit where the old one was. I can't change the volume scheme. Has anyone got a method to let me use my full 160GB hard drive rather than half of it? Or maybe software that can alter it.
I use Disk Utility (stand alone, on a USB key) to make backups of my system disk to an external disk and then transfer it from my home system to a MacBook and vice-versa when I need to travel.
Recently, I upgraded from 10.9.2 to 10.9.3 and, not long later, to 10.9.4. In the same period, I also had an increase (not a very big one, just a few GB, less than 15) in the occupied space of that system disk. The current amount of data on it is 164.64 GB.
I'm not sure if my problem comes from the sub-version upgrade, from the increase in data size, from both, or from something else. The home computer is an iMac with a 318.88 GB internal disk. The MacBook has a 500 GB internal disk. The partitions used on the external disk to make bootable backups are 400 GB big.
I can backup both internal disks to the external partitions (and boot on the resulting external disk when I check that it is usable). I can also copy the external backups to the MacBook system disk and boot on the result without problem.
But, recently, Disk Utility has started to refuse copying the content of the external backup partitions to the internal disk of the home system. It says there is insufficient space on the target volume. If the error message is correct, it means that I cannot backup 164.64 GB of data on a 318.88 GB volume!
For the record, the external backup partitions are OK when verified with SOS.
I have a 3 TB disk that I used for video files that I now want to use for backup. So I wanted to erase and partition the drive to wipe it clean. So after going into Disk Utility and "trying" to erase and partition the drive, it now only shows the drive and no volumes.I cannot create or partition volumes. I tried verifying and repairing the disc but that didn't do anything. The only buttons available are Verify, Info and Burn. What do I do to use the drive again?
I have an external WD drive in a self-enclosed case, both purchased from OWC, used for my Time Machine backups. The disk and backups have been running just fine since I began using this disk over a year ago.
When I plugged in my disk yesterday (USB), it didn't mount. I ran Disk Utility on my 'Time Machine' partition, starting with verify disk. It reported that it needed to be repaired. When I run repair, it runs for several minutes and I see information of what is being done -- incorrect block count for file shutdown_time, incorrect block count for file permStore, etc -- but I always ends with "Disk Utility can't repair this disk" and that it needs to be reformatted.
I've run Repair Disk multiple times, all with the same answer so it seems running it again won't change the problem. Reformatting and starting fresh with Time Machine seems to be the only course of action
What specific issues should I be aware of as I reformat my Time Machine drive/app partition?
Info: iPhone 4S, Mac OS X (10.7.4), MBP, 2.4 GHz Intel Core i7
I partitioned my disk using Terminal's diskutil. I decided i didnt need the partition anymore, so i deleted it (using Disk Utility.app) and added the free space to my mac partition. Basically, Finder and Terminal dont show the free space added back, and Disk Utility shows the space added back to the disk. I tried restarting, repairing disk (which coincidentally had an unrelated problem), repairing permissions, but the problem is still happening
Trying to resize and existing volume using disk utility on Leopard. Have a 1TB internal Drive with 1 Partition (extended Journal), not a boot drive this is just for data, now want to add another partition (2 Volumes), in effect shrinking the size of the original so I have 2 equal sizes.
So Far I have used 450GB, so there should be enough room to do this right? Although when I go through the process, I get the message 'not enough space on drive'.
I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info: MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
I've run the disk utility verify disk several times and come up with an error (post title) indicating I have a corrupt HD and need to repair. I've rebooted with command R and run disk utility to repair the disk and it says everything is fine. Reboot to normal mode and verify continues to show the error.
Other info says the file system exit code is 8.
Info: MacBook Pro (Retina, Mid 2012), OS X Mountain Lion (10.8.2)
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
I'm retrying to install windows on my mac. It's the second time I'm trying, but it has somehow become way harder. The first time I installed Windows, everything worked perfectly, untill I noticed that SP2 wasn't installed, and I couldn't install it on my windows, somehow.
Now I'm trying it with a different version of XP (Pro), but Bootcamp is giving issues. I haven't deleted the old volume/partition (don't know the difference) of windows yet, as it is installed on my startup disk and Disk Utility won't delete it .
I just bought a new WD hard disk and backed up all my data to it (80 GB). I then performed a clean install on my Macintosh HD.
Before I restored my data to the internal drive, I thought it would be a good idea to copy my fresh installation to a new partition on the external disk.
So I booted up disk utility to check if partitioning would affect my data. Using the partition tool, I clicked the plus sign (without applying changes). Disk utility said that if I add a partition, it would simply add a new volume and that the previous volume would not be erased. I clicked apply, and now there is nothing left of my data in the original partition.
Can I get it back? Undo the partition, or file recovery?
I am attempting to erase my Hard Drive so I can start from scratch and the disk utility tool does not allow me to erase. The hard drive is grayed out. I want to reimage my computer, but I cannot use the CD that came with it because it came with Snow Leopard, and I am running on Lion.
I have a Mac Pro and not too long ago I swapped from a fat, heavy and filthy white Apple Keyboard to a new skinny silver one. I like it, and also love that the F7-9 Skip Back-Pause/Play-Skip Forward keys work for iTunes, even when another app is active (what's the word I'm looking for - in focus or whatever). But I use Optical output, so the volume keys (F10-12) don't do anything. I know that, when iTunes is the active app, I can command-+/- to change the volume, but I'd love to be able to map the F10-12 keys to do that - without having to have iTunes active (playing, but not the active window).
Recently, my newer (last year) iMac probably running 10.5 started speaking and wont shut up... there is no obvious way to turn it off. I usually figure problems out myself but there are no system preferences that effect it. I even changed the voice in preferences as a test and it is still the same guy reading everything clicked in all applications except when I am in system preferences so far. Usually when I run into a dead end like this there is some mystery key command that works... anyone know?I also noticed that some of the top line (f) keys are not doing what they are supposed to any longer as well... volume up opens the window for expose & spaces it looks like and does not control the volume monitor brightness controls are not working either... I went to the key and mouse preferences and set the key strokes to default and still the same.
I was wondering if anyone knows how to do this- it is a pita to adjust separate volume controls on everything. If I adjust the volume on the keyboard, the volume slider in itunes doe snot move. If I set the volume on itunes with a mouse, then come home and use the volume controls on my keyboard, I have to also manually adjust the slider in itunes. Anyway to link the two?
I recently decided to increase the volume of my bootcamp disk, which I had done in the past using a method which ultimately made the disk unrecognizable. This time around I used Winclone to create an image of my bootcamp disk. I was not sure exactly how Winclone worked and to be safe I decided to keep the Bootcamp disk I had, and I created a third partition of a larger volume to which I restored the bootcamp image. Everything worked fine obviously, and the image was restored correctly to the new larger volume. The dilemma is I had two bootcamp disks, so I erased the smaller volume because I no longer needed it. Currently I am trying to restore this empty space within the main disk to the Macintosh HD. Disk util looks like:
I know I can just create a backup of the macintosh HD, another image of the bootcamp disk, and format the disk and start over, but I am hoping there is an easier way to go about this; considering there has been a method engineered such that I can just drag that corner of the mac HD and voila I have instantly more storage after applying, it seems viable that there is something that can be done rather than formatting my disk, unless the necessity for that of course was overlooked.
Info: MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
I am attempting to select a different startup volume. I restarted my Mac Pro while holding the Option key. The Startup Manager screen never appearded for me to make a selection. I have two bootable volumes on separate internal disks available. I see them displayed in Disk Utilities.
So I thought I was a know it all and thought I could remove my Windows partition without reading the instructions. Typically one would do the following: 1. In Mac OS X, quit all open applications and log out any other users on your computer. 2. Open Boot Camp Assistant, in the Utilities folder in the Applications folder. 3. Select "Restore the startup disk to a single volume" and then click Continue.
However, I messed it up. Instead of going through Bootcamp assistant, I went through Disk Utility and "erased" the Bootcamp volume. Now I am not sure where I at? I erased it, but you can still see the Bootcamp volume listed. And now when O try to use Bootcamp assistant to remove the partition I get the following: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS extended (journaled) volume or already partitioned by boot camp assistant for installing windows. I want to reinstall a Windows, but want to start fresh.
I am having a problem with my volume on my iMac. It is turned all the way up. and I keep turning it down everytime but when I restart or shutdown the computer when it boots back up it is back at being 100% volume again. How do I fix this to where it is at a decent volume at startup?
Before I get flamed and etc... I have google and done some research about this issue but cannot find much about it.
I am not sure if this is a very common issue or topic but how do you adjust or modify your apple keyboard so that you can adjust screen brightness or volume? I am currently running Windows XP SP3, on a 2.4Ghz Unibody Macbook.
