I reinstalled Snow Leopard on a new volume, transferred stuff I wanted from the old volume to the new volume, and deleted the old one. In disk utility, I have not been able to stretch the volume to fit where the old one was. I can't change the volume scheme. Has anyone got a method to let me use my full 160GB hard drive rather than half of it? Or maybe software that can alter it.
View 2 RepliesI have a 3 TB disk that I used for video files that I now want to use for backup. So I wanted to erase and partition the drive to wipe it clean. So after going into Disk Utility and "trying" to erase and partition the drive, it now only shows the drive and no volumes.I cannot create or partition volumes. I tried verifying and repairing the disc but that didn't do anything. The only buttons available are Verify, Info and Burn. What do I do to use the drive again?
View 2 Replies View Related I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
I have 43GB available on a 120GB drive on my MacBook base model and I'm trying to partition via BootCamp.I'm trying to allocate 32GB to the Windows partition but I keep getting the following error message:Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Now I've backed up my disk and launched disk utility, and try to follow above directions here but the Mac OS Extended (Journaled) area is grayed out and when I click apply after highlighting the MacBook are (in blue), it errors out and says the disk is out of space.
View 7 Replies View RelatedFirst some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
Doing some disk utility stuff turned this up but I cannot select repair disk.
Verifying volume "Macintosh HD"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
nded Attributes file.",0)
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
(It should be 12041024 instead of 12041020)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Updating my hard drive to SSD. The first line is right on it's place: it tells the name for my SSD (which is: 1Tb Samsung EVO) On the picture below is shown the second line that is missing when the ssd is installed.Does this mean that MAC can't recognise the drive?Does it work properly?
View 3 Replies View RelatedAnyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies View RelatedI have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies View RelatedI have to do a back up (I'm cutting in Avid) on this FAT32 volume (for interoperability it is formatted this way), but I can't mount it via the Disk Utility or the 'mount' command in Terminal (it doesn't list the device, despite seeing it in Disk Utility - the volume is greyed out).The drive is connected via Firewire 400 and 800, USB is not available (to few slots).
View 3 Replies View RelatedOn one of our MacBook Pros (Late-2011), running the latest OS X 10.7.3, Disk Utility says the volume needs to be repaired. When I use Disk Utility from the Recovery HD, it says the volume appears to be OK. I verified by using fsck in single-user mode, and it found no problems either. Which do I believe? Is this a sign of a soon-to-fail hard drive?
View 9 Replies View RelatedMy new 2010 hexacore Mac will have 24G memory, an OWC Extreme Pro 120G SSD (positioned in the lower optical bay) and four 2TB WD RE4 drives. I'll use my old Synology 209 NAS (two 1TB WD Green Raid 1 drives) for TM backups over 1000Mbps Ethernet. Yes, I'll need to upgrade to a larger NAS very soon. This will be my first Mac Pro (have MBPs and iMac) and will be used for web design and development (mostly Adobe CS5 products).
The SSD will be used for boot and application files. I plan to use Disk Utility to create a 1+0 Raid array for data files. For a Scratch disk, should I:
1) create a partition on the 1+0 Raid Array for Scratch
2) partition a chunk of the SSD for Scratch
3) attach a spare external 2.5" WD drive via Firewire 800 for Scratch
Based on my reading, it seems that option 1 makes the most sense but I'm not entirely sure if you can partition a 1+0 array with Disk Utility. I'm pretty sure option 3 is quite silly but wanted to toss out the idea. Lastly, are there any generic recommendations on scratch volume sizing?
I have a 640GB external USB hard drive that I use for time machine currently. I would like to go in and add a partition to load movies to and plug it into my PS3. Can I use disk utility to create a new partition without erasing the stuff already on the disk?
And then is it possible to format a partition larger than 32GB as FAT?
I use Disk Utility (stand alone, on a USB key) to make backups of my system disk to an external disk and then transfer it from my home system to a MacBook and vice-versa when I need to travel.
Recently, I upgraded from 10.9.2 to 10.9.3 and, not long later, to 10.9.4. In the same period, I also had an increase (not a very big one, just a few GB, less than 15) in the occupied space of that system disk. The current amount of data on it is 164.64 GB.
I'm not sure if my problem comes from the sub-version upgrade, from the increase in data size, from both, or from something else. The home computer is an iMac with a 318.88 GB internal disk. The MacBook has a 500 GB internal disk. The partitions used on the external disk to make bootable backups are 400 GB big.
I can backup both internal disks to the external partitions (and boot on the resulting external disk when I check that it is usable). I can also copy the external backups to the MacBook system disk and boot on the result without problem.
But, recently, Disk Utility has started to refuse copying the content of the external backup partitions to the internal disk of the home system. It says there is insufficient space on the target volume. If the error message is correct, it means that I cannot backup 164.64 GB of data on a 318.88 GB volume!
For the record, the external backup partitions are OK when verified with SOS.
Info:
iMac, OS X Mavericks (10.9.4), 4 GB memory
Well i'm trying to burn a disk image onto a DVD-DRL using disk utilities. I get everything all into disk utility and the blank cd is there and the DMG. When i select burn and the burn options comes down, It only allows me to burn to the super drive and not to the blank DVD. I tried going along and just burning it to the SuperDrive and it didn't work.
View 4 Replies View RelatedI have an external WD drive in a self-enclosed case, both purchased from OWC, used for my Time Machine backups. The disk and backups have been running just fine since I began using this disk over a year ago.
When I plugged in my disk yesterday (USB), it didn't mount. I ran Disk Utility on my 'Time Machine' partition, starting with verify disk. It reported that it needed to be repaired. When I run repair, it runs for several minutes and I see information of what is being done -- incorrect block count for file shutdown_time, incorrect block count for file permStore, etc -- but I always ends with "Disk Utility can't repair this disk" and that it needs to be reformatted.
I've run Repair Disk multiple times, all with the same answer so it seems running it again won't change the problem. Reformatting and starting fresh with Time Machine seems to be the only course of action
What specific issues should I be aware of as I reformat my Time Machine drive/app partition?
Info:
iPhone 4S, Mac OS X (10.7.4), MBP, 2.4 GHz Intel Core i7
i want to partition my external hard drive to OS journaled so i can store files over 4 gb.
View 4 Replies View RelatedI have a MacBook Air with solid state hard drive. The Disk Utility partition tool shows that "This partition cannot be modified". What can I do?
Info:
MacBook Air, Mac OS X (10.6.8), Total Capacity : 121.33 GB (121,332
I don't know how I managed to do it, but I'm running Leopard on my MBP on an Apple Partition Map. Anyhow, I got my Snow Leopard disk yesterday and it wants me to reformat to GUID and warns me that it will erase everything. Now I have to figure out how a way to backup everything, install SL on GUID and restore everything while retaining my settings, serial numbers and all that good stuff. Is this possible?
View 6 Replies View RelatedI partitioned my disk using Terminal's diskutil. I decided i didnt need the partition anymore, so i deleted it (using Disk Utility.app) and added the free space to my mac partition. Basically, Finder and Terminal dont show the free space added back, and Disk Utility shows the space added back to the disk. I tried restarting, repairing disk (which coincidentally had an unrelated problem), repairing permissions, but the problem is still happening
View 3 Replies View RelatedTrying to resize and existing volume using disk utility on Leopard. Have a 1TB internal Drive with 1 Partition (extended Journal), not a boot drive this is just for data, now want to add another partition (2 Volumes), in effect shrinking the size of the original so I have 2 equal sizes.
So Far I have used 450GB, so there should be enough room to do this right? Although when I go through the process, I get the message 'not enough space on drive'.
I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
I've run the disk utility verify disk several times and come up with an error (post title) indicating I have a corrupt HD and need to repair. I've rebooted with command R and run disk utility to repair the disk and it says everything is fine. Reboot to normal mode and verify continues to show the error.
Other info says the file system exit code is 8.
Info:
MacBook Pro (Retina, Mid 2012), OS X Mountain Lion (10.8.2)
I own an iMac with a 250 GB HDD along with a Macbook that originally had a 120 GB HDD. So when I purchased my 1 TB external HDD this summer, I partitioned the external so I could back up both my iMac and Macbook via Time Machine. Seeing how small the Macbook HDD was, I allocated roughly 300 GB of my external to it, with the iMac getting the rest.
View 5 Replies View RelatedI'm trying to partition my hard drive. It's currently one whole 160 GB unit. I want to split it into a 135 GB partition and a 25 GB partition.
Currently Used Disk Space: 95.10 GB
Currently Free Disk Space: 53.51 GB
However, whenever I try to create the 25 GB partition in Disk Utility (formatted as Mac OS Extended - Journaled) it gives me an error message:
And here's a screenshot of my hard drive's info:
What's going on here?
Originally I had 2 partitions on the internal 500gb hd in my MBP, one was 455gb the other was 10gb that I used to mess around on. I do not remember what format the small partition was in last, it may have been FAT32. I wanted to delete the small partition and consolidate into one partition. My OSX partition is formatted macos extended. I went to Disk Utility and deleted the small partition by selecting it and clicking "-." There was grey space where the partition used to be. No problems here. Most of the options in Disk Utility are greyed-out.
I cannot select a different partition scheme. When I try to resize the partition either by dragging it to cover the grey space or by manually typing in a larger size, there is no way to apply the changes. The "Apply" button is continually greyed-out (See Image). If I try to resize the partition and then close the window, Disk Utility alerts me that I have an operation in progress and that unsaved changes will be lost. Disk Utility is not letting me resize my main OSX Partition, it appears that I do not have appropriate permissions to make this change - I am the only user/admin of this machine.
I having trouble resizing an external harddrive of mine. It is a 500gb Lacie drive, and inside it has two partitions: time machine (250gb) and my stuff (250gb). I want to make time machine 150gb and make My Stuff occupy the remaining space. However, when I enter Disk utility, there is no dot between the partitions that I can drag. When I pull the corner, the disk gets smaller, but after resizing there is still a blue rectangle outlining where the old disk was. The partition "time machine" is used for time machine backups, but I have deactivated backups in Preferences, and Time Machine is currently "off". I have included an image for clarification. How can I resize the partitions the way I want them?
View 4 Replies View Relatedi am trying to format a brand new 120 GB hard drive via an external USB 2.0 enclosure. About 25 minutes ago, I selected the "erase" option and slected the Mac OS Extended (Journal) Volume format. For the last 25 minutes, disk utility has been saying that it's creating a partition map. It's doing nothing.
I have reason to believe my enclosure may be faulty. (I had a similar problem on an old hard disk and thought that the problem was with the disk; now I know.) I need to know: How do I disconnect/eject the hard disk without damaging it? The eject option in Disk Utility is grayed out. If I attempt to quit Disk Utility I get a warning telling me I could leave my disk inoperable.
