Any way to really check for hardware failure on an external FW800 drive. I'm interested in being able to check for bad/pending sectors. SMART status on external drives is not supported in disk utility or SmartCTL
What else is out there?
I just installed last night the 1TB WD Scorpio Blue without a problem in a 2010 MBP 13", but seem to be having some issues now. Im showing the drive is shown w/red text and failing the SMART status in the disk utility. It showed verified when I installed it last night and reinstalled OS X, but now this. I have also been getting some beachballs, but does seem to be running fine now. Is this a sign of just a bad drive, or is it normal for a non-apple drive to fail the smart status check?
View 9 Replies View RelatedMy macbook pro's HD is in bad shape. S.M.A.R.T status is not ok. Sometimes the OS freezes, but so far this is the main problem I detected so far. Until now. I reinstalled the OS X - clean install - to see if things got better, but no luck. Although I think the system is more stable now, the machine is unable to restart or shut down as before. I have to hold the shut down button for a couple of seconds. With this in mind, is it dangerous for the machine to do frequent force shut-downs, or it just deteriorates the HD even more?
View 4 Replies View RelatedIt's a new Momentus XT 750 that I bought to replace the orignal HDD.I can read and write and even installed Leopard via USB, but the SMART status was not appearing 'verified'.After installing I hook it up to my MBP and it could not be recognized.
Info:
MBP 2.8G Intel Core 2 Duo, Mac OS X (10.5.8), 4Gb RAM
I'm using a unibody MBP 15" that I had for about 2 years. After being awakened from sleep mode, the hard drive started to "click" for about 3 mins straight (I was on XP at the time, although that's probably irrelevant). I was so convinced that my hard drive was about to die, so I backed up my data. Then I ran a "repair disk" on disk utility to see what's up. There was something about "missing thread record" and "invalid volume file count," but eventually it was repaired.
It now says the drive is fine. So my question is, should I still expect the drive to fail on me pretty soon? I know what I heard, and it was pretty bad. It seemed like a hardware problem that can't simply be fixed by running a program. At the same time, I'm a bit puzzled by the SMART status saying the drive was verified. Is it SMART that unreliable?
A while back I removed a Apple Hard Drive after I thought I had shut down the computer. Instead, it had just slept and so still had the power on. This caused the file system in the hard drive to fail, so I erased and rebuilt the file system on the Hard Drive. It worked fine for another day, and then failed. When I went to see if I could fix it, Disk Utility said the S.M.A.R.T status had failed and the send the hard drive to an apple specialist. Is there any way I could fix the Hard Drive myself?
View 1 Replies View RelatedI'm new to Apple Mac so apologize in advance for using incorrect terminology. Since yesterday when I signed on to OkCupid, I'm getting what I believe is Apple's "hourglass" icon (round various colored circle) which I can't get rid of (and can't do anything) until I shut down and restart computer. It's happened today on other sites as well. It takes over my computer. Is this a virus? Does anyone know, and if so, how can I get rid of it?
View 4 Replies View RelatedI called Apple and requested an RMA for a new machine I recently received; is there a way to check the status of the RMA online?
View 3 Replies View RelatedI have a Mac Book Pro running 10.6 .... Now the battery cannot be charged !
How do I check whether it is the battery problem ?
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
SMART status in my imac hard disk running Snow Leopard is failing. it is < 2 years old. No obvious issues with the machine.
View 1 Replies View RelatedAm i just crazy? Or does anyone else check their repair status 4+ times a day?
View 1 Replies View RelatedHey all, I'd like to know how to check the status of my hardware, particularly my RAM and graphics card. I remember partitioning some of each, along with some of my harddrive space, to an application a while back that has now been deleted. However, it seems as if my computer isn't running as quickly as it had been. Is there any way to redirect all hardware power to my harddrive, and delete all other partitions? I haven't messed around with it much, yet, but I'd like to get a lead from someone who has done it before.
Info:
Mac OS X (10.7.3)
What the icon "check client status" does? It just noticed it on my MacBook Air while I was trying to figure out why my computer is running so slowly? Can I delete it?
View 8 Replies View RelatedI recently erased my Macbook's HD because it was insufferably slow. I reinstalled OS X 10.6.1 and all is well! Computer's fast and everything works like it should. Except that my external hard drive (2TB Seagate FreeAgent GoFlex Desk) is now read-only to me. It used to be readable and writable when plugged into any computer. Then something changed, and it only worked with my laptop (not anyone else's). When I reformatted and reinstalled OS X, I chose the same user name as I had before the reinstall, because I was semi-worried that this might happen. My computer troubles were so frustrating, however, that I just took the leap. Now here I am with 620GB of data that I cannot delete, and another 1.38TB of empty space I cannot use.
Info:
MacBook, Mac OS X (10.6.1), Need to change HDD permissions.
Some time ago I had a problem with my iMac. Turned out my internal HD was broken so I got a new one.
The problem is that after I got my iMac with the new INTERNAL HD back, I was unable to write data on my EXTERNAL (Toshiba) HD, which until then I had no problems with. When I checked the format of it, it now says NTFS.
As I have more than 1 TB of data on it which would take forever to back up, is there another way to change it's status and write on it again? I was once able to do it, so I don't know where the problem is.....
Info:
iMac, OS X Mavericks (10.9.4)
how can I check the free space capacity of an external disk connected to my MacBook Air?
View 2 Replies View RelatedAs the Title of The Post says, i need to know if Apple Hardware check, Does check the hard drive. I'm getting a little bit more frequent hard drive clicks so i want to make sure my HD is not failing. So i need to know as so as possible if Apple hardware check looks for Hard drive Problems. And if it does not. Can someone point me into some Utilities i can use?
View 7 Replies View RelatedI've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View RelatedI've lost all status information on my menu bar. No battery status, airport status, time, spotlight magnifying glass, etc. Restarted a couple of times but no luck. My mac is a '06 macbook pro core duo 2.16 (1,1). Anyone else having problems? Lost screen capture functionality as well, so I can't show you.
View 10 Replies View RelatedThis has happened about three or four times now in which I'll wake my MacBook (unibody) from sleep (ie. open it up), and it'll have a frozen clock at some random time, renders spotlight unable to function, freezes battery status (even says it's plugged in at 100% even though it's sitting in my lap unplugged (has been unplugged since las night).
Even a weird wifi indicator next to the CPU menu Meters. I dunno what's going on. Has happened randomly when I leave it off over night. Just a minor inconvenience since it requires a restart. Just wondering if you guys know what's going on and/or how to fix it.
I have a Mac Pro 3.1..Sometimes (most of the times, actually) the Mac Pro doesn't boot and just stops after the chime (just as it was powered off). But what I found strange is that the white status light is always on (not blinking, always on) from the moment I connect the power strip.
I've run multiple times the Apple Service Diagnostic tests (running then again at this moment) and there´s absolutely no error reported. I've changed memory, video card slot position, everything I could think off, but still haven't found a solution.
Info:
Mac Pro, OS X Mavericks (10.9.4)
When I connect my MacBook to my iMac to transfer files over (using target disk mode), a sparsebundle of my macbook files shows up as a mounted disk image, along with the yellow external hard drive icon on my desktop. The yellow icon says I have about 80GB total, but the mounted disk image (white) says I have 120GB total on it. Does that mean I have more space than I originally thought? (I thought it had 80GB on it)
View 1 Replies View RelatedI just bought an iMac 24" base model and love it. I'm quickly learning the OS, but there is still a lot that is foreign to me.
Wireless was easy to setup, however I can't find any type of connection status (as in signal strength). Am I just missing it, or do I need a 3rd party program?
Another quick question while we're here, what OS do I have? It's OS X 10.5.6, would that be Leopard? All these code names are new to me
Another question I see a lot of people talking about using different browsers. Is Safari considered the Internet Explorer of the MAC? Or is Safari a good browser and people just like to try different things?
after updating to 10.5.7, the battery icon doesn't seem to want to update. info is set to show battery icon and percentage.
after unplugging the mag connector, battery status indicates 100% after 1.75 hours. anyone seen this before? did not notice this happen prior to update.
Any news on the front of the 10.7 development? What features will be implemented most likely?
View 4 Replies View RelatedWhen I select a file in my Finder, I want to be able to see the file size. I've googled and googled but found nothing. don't tell me to hit the spacebar. There must be some little app or script to enable this right ?
View 3 Replies View RelatedHow do I get rid of this little bar on the bottom of safari? I don't know how I enabled it and I forget how to hide it
View 2 Replies View Relatedjust purchased lion how do i see status on download?
View 3 Replies View RelatedIn the past, on Itunes 11.0, when I opened the program, there would be a bar on top that would read, "File, Edit, View, Controls, Store, Help" and below , a status bar that would tell me the number of tracks in a playlist and duration, "7 Songs, 28:20 Total Time, 51 MB"..Those controls/status bars are gone in the new 11.4 edition of iTunes.
Info:
itunes 11.4, Windows 7
Just playing around with smart mailboxes to organise my emails.
I have set a couple up and the correct mails go to the correct smart mailbox, but they also remain in my inbox. Also when i tried deleting them from the inbox they were also deleted from the smart mailbox.
Am I doing something wrong, or is that just how it works? I'm just trying to have them be automatically moved to the desired smart mailbox and not in inbox.
