It's a new Momentus XT 750 that I bought to replace the orignal HDD.I can read and write and even installed Leopard via USB, but the SMART status was not appearing 'verified'.After installing I hook it up to my MBP and it could not be recognized.
Info:
MBP 2.8G Intel Core 2 Duo, Mac OS X (10.5.8), 4Gb RAM
I'm using a unibody MBP 15" that I had for about 2 years. After being awakened from sleep mode, the hard drive started to "click" for about 3 mins straight (I was on XP at the time, although that's probably irrelevant). I was so convinced that my hard drive was about to die, so I backed up my data. Then I ran a "repair disk" on disk utility to see what's up. There was something about "missing thread record" and "invalid volume file count," but eventually it was repaired.
It now says the drive is fine. So my question is, should I still expect the drive to fail on me pretty soon? I know what I heard, and it was pretty bad. It seemed like a hardware problem that can't simply be fixed by running a program. At the same time, I'm a bit puzzled by the SMART status saying the drive was verified. Is it SMART that unreliable?
I just installed last night the 1TB WD Scorpio Blue without a problem in a 2010 MBP 13", but seem to be having some issues now. Im showing the drive is shown w/red text and failing the SMART status in the disk utility. It showed verified when I installed it last night and reinstalled OS X, but now this. I have also been getting some beachballs, but does seem to be running fine now. Is this a sign of just a bad drive, or is it normal for a non-apple drive to fail the smart status check?
View 9 Replies View RelatedAny way to really check for hardware failure on an external FW800 drive. I'm interested in being able to check for bad/pending sectors. SMART status on external drives is not supported in disk utility or SmartCTL
What else is out there?
My macbook pro's HD is in bad shape. S.M.A.R.T status is not ok. Sometimes the OS freezes, but so far this is the main problem I detected so far. Until now. I reinstalled the OS X - clean install - to see if things got better, but no luck. Although I think the system is more stable now, the machine is unable to restart or shut down as before. I have to hold the shut down button for a couple of seconds. With this in mind, is it dangerous for the machine to do frequent force shut-downs, or it just deteriorates the HD even more?
View 4 Replies View RelatedA while back I removed a Apple Hard Drive after I thought I had shut down the computer. Instead, it had just slept and so still had the power on. This caused the file system in the hard drive to fail, so I erased and rebuilt the file system on the Hard Drive. It worked fine for another day, and then failed. When I went to see if I could fix it, Disk Utility said the S.M.A.R.T status had failed and the send the hard drive to an apple specialist. Is there any way I could fix the Hard Drive myself?
View 1 Replies View RelatedSMART status in my imac hard disk running Snow Leopard is failing. it is < 2 years old. No obvious issues with the machine.
View 1 Replies View RelatedMy order MBA 2012 2.0GHz Intel Dual-Core Core i78GB 1600MHz DDR3L SDRAM256GB Flash StorageKeyboard/User's Guide-THACountry Kit-THAÂ status change to "Preparing for Shipment" But why still ships 2-3 weeks?
Info:
MacBook Air, iOS 5.1.1
I'm running Leopard (10.5.5) on an Intel g5 iMac. I noticed this afternoon when trying to drop an app into my 'Applications' folder that I had to enter my password in order to do. Checking the 'Get info' pane for the folder I noticed that the permission status for 'everyone' was set to 'read only'. I have no idea how this happened but it must have been fairly recently as I was happily dropping apps into the folder only a few days ago. There are also two other 'names' in the panel labeled as 'unknown', one of whom has read & write permission and one of whom is also 'read only'.
There are only two user accounts on my mac and we are both administrators, so I don't know why there are so many entries under the 'Sharing and Permissions' section. So anyway, I unlocked the panel with my password and tried to flip the permission for everyone from 'read only' to 'read & write'. I got the following error dialogue: "The operation could not be completed. An unexpected error has occurred. Error code - 8076." I tried to add a new 'administrators' group to the permissions panel with read and write access but received the same error.
I recently erased my Macbook's HD because it was insufferably slow. I reinstalled OS X 10.6.1 and all is well! Computer's fast and everything works like it should. Except that my external hard drive (2TB Seagate FreeAgent GoFlex Desk) is now read-only to me. It used to be readable and writable when plugged into any computer. Then something changed, and it only worked with my laptop (not anyone else's). When I reformatted and reinstalled OS X, I chose the same user name as I had before the reinstall, because I was semi-worried that this might happen. My computer troubles were so frustrating, however, that I just took the leap. Now here I am with 620GB of data that I cannot delete, and another 1.38TB of empty space I cannot use.
Info:
MacBook, Mac OS X (10.6.1), Need to change HDD permissions.
Is there any way to automatically change all the quotation marks in the document to the smart quotes? Or am I going to have to go through and manually change all of them? I've tried adjusting the proofreading settings to use smart quotes then proofing the document, but it's not correcting the quotation marks.
View 2 Replies View RelatedEvery time it shows in the end of process that update is failed. The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs. I have MacBook Pro 13 inches with Mac OS 01.7.2.
Info:
MacBook Pro, Mac OS X (10.7.2)
My Macbook Pro (2010) hangs up at the grey startup screen. The icon keeps spinning. I believe this may be because the laptop ran out of power during critical software updates. I have been able to reach disk utility by starting up with the original installation cd and holding 'c'. When I verify the disk, I get an error:Â
"The volume could not be verified completely.
Error: The disk needs to be repaired. Click Repair Disk."Â
When I click repair disk, I get the following message:Â
"Verify and Repair volume "disk0s2"
Checking Journaled HFS Plus volume
Invalid node structure
The volume could not be verified completely.
Volume repair complete.
Updating boot support partitions for the volume as required.
Error: Disk Utility can't repair this disk.. disk, and restore your backed-up files."Â
My hard drive isn't fully backed up and I would like to retrieve as many files as possible before reformatting the hard drive.Â
I have heard of being able to access the hard drive through other means (connecting the drive to another computer and/or another external) and being able to salvage files. Should I get Diskwarrior?Â
similar issue: [URL] ....
I bought a refurbished MacBook from Micro Centers, with the Leopard operating system on it. I upgraded the memory from 2G to 4Gig. I bought Snow Leopard and upgraded the operating system. Then I bought Lion from The App Store and downloaded it. Everything seems to be working fine except when I try to download Apps from the App Store, I get a warning saying "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." I am new to Apple products.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have an external hard drive (my book) by WD.... When I plugged it in today it did not open and reported this error:
Catalog file entry not found for extent. The volume could not be verified completely
ERROR: This disk needs to be repaired. Click Repair disk.Â
My question is if I hit repair will I loose all my files? I need these files!!Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2)
[URL]
Despite its description, I hooked it up to my receiver and it does NOT pass audio through. I've been hunting around and all I've found so far is one Youtube video of a guy with an adapter that worked (in the sound section of the system preferences, it shows another option for output that I didn't have), but not what adapter it was.
I bought an app on the Apple store and used it for two weeks. Last Sunday it started giving me problem, so I tried to open the app but it could not be opened. I phoned the Apple support today and they said that their server was with a problem, What happens? When I erase the app from my computer and tried to re-download it it, my computer said that the computer could not be verified, so I could not download the app. What should I do?
Info:
MacBook Pro, Mac OS X (10.5.8)
I'm running a MacPro 10.6.8.Â
When I did the normal software update, it installed the Java update and one other, but had an issue with iTunes 10.6.3.Â
It says 'The update iTunes cannot be installed - the update cannot be verified'Â down at the bottom I see - iTunes partially downloaded 22%Â
I've rebooted and re-run software update several times, exact same issue, it won't try to download it. How do I clear out the partially downloade file and fix this?Â
Info:
Mac Pro Quad, 16GB, HD 3870, Mac OS X (10.6.4), FireFace 400, Intensity hdmi, Logic 9, FCS3
I can not download the new version of iTunes - 10.6.3. It will not go past 39.8Mb of the download from the software updates. When I try to download directly from the Apple download page, it does absolutely nothing.Â
Mac mini (Intel)
OS 10.7.4
2 Gb RAMÂ
Info:
Mac Mini, Mac OS X (10.6.4)
After 10.7.4, now disc wont repair / verify.
Info:
Mac Pro
tried to update software and message showed update could not be verified. may have been corrupted during download. Update will be downloaded and checked again next time software update runs, anything else I can do?
View 6 Replies View RelatedTrying to access the App Store, I received this message. What do I do?
Info:
Mac OS X (10.6.8)
Installing Update problem. In attempting to update from 10.9.1 to 10.9.4 i get the following message An error has occurred and it says OS X Update Combined could not be verified etc.
Info:
iMac, OS X Mavericks (10.9.1), Imac 21.5" Late 2012
I want my status to appear idle so that it seems ive been away from my computer. Is there an app or something where it will show me as idle on ichat?
View 2 Replies View RelatedI called Apple and requested an RMA for a new machine I recently received; is there a way to check the status of the RMA online?
View 3 Replies View RelatedI remember about a year ago that people were discovering you couldnt use Bootcamp/Windows7 with a Macbook Pro that was eqipped with the OEM SSD drives.
I was wondering if in the interim Apple has done something to correct the situation or if I should stick with the 5400 drive.
So I had my MacBook Pro charging, and it said it was on 59%. For some reason, it had been stuck at 59% for a while. I highlighted the power readout in the menu bar, and it said 20:00 until full. I unplugged the charging cable and plugged it back in, then it read 89% full and charging.Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
I have a Mac Book Pro running 10.6 .... Now the battery cannot be charged !Â
How do I check whether it is the battery problem ?Â
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
i purchased omnigraffle for my mac pro several months ago. i just recently purchased a macbook pro and would like to have access to that app.Â
when i recently copied omnigraffle from the mac pro to my laptop, i get the dialogue to use licensed, unlicensed, or purchase.Â
then, went to the app store/purchases and the store wouldn't verify my license. i deleted the app as a possible solution to install through the app store. now, i'm getting the response: 'the product distribution file could not be verified'Â
Info:
MacBook Pro, Mac OS X (10.7.2)
app store not work my id apple-Your device or computer could not be verified. Contact support for assistance.
View 1 Replies View Related