It'll be interesting to see if the screen in the 13" MBP announced yesterday is the same one that Apple quietly started putting in the MB a couple of months ago. Someone recently posted that Apple changed the display in their UMB after they complained about the washed-out look of the screen. I wonder how difficult it would be to get Apple to agree to a replacement based on the differences between the old and new displays.
View 4 Replies
I'm going on holiday in Mid-October, and I have a computer there waiting for me, but I don't have a monitor available so would like to hook it up to my macbook pro's screen for obvious reasons.
Anyone ever done this? The computer just has a standard VGA output.
if the UMBP's screen is easily scratched or pretty resistant?
View 10 Replies View RelatedI am looking at the macbook pro's 13 or 15"
The 13 inch is 1552 Euros and the 15 is 1759 Is the extra 2 inch worth the money? I am wanting it to surf the net, graqphic/web design and matbe some video work.
Is there a difference? Anything at all? I would expect Apple to make the 2010 standard res. screens worse in quality and earn more money since they have the higher res. available. I really like the 2009 glossy screen, but i have to be sure it is exactly the same this year. If they did something like that it's typical Apple.
View 2 Replies View RelatedI've heard that there have been some differences between the older and newer Macbook screens - I'm thinking about buying a reburb unibody macbook and want to know how significant the difference is. If it's big enough I'll use my student discount to get a new mac with an iPod and then sell the iPod for the price difference, but that is a lot more work and initial money spent vs just getting a refurb. Does anyone have any experience with both?
View 12 Replies View RelatedDoes the matte screen provide the same brightness, contrast and colour performance as the Gloss screen?
View 12 Replies View RelatedSo I have a 1.8ghz dual G5 with 3gb of ram for work. I mainly work in Adobe CS and do a far amount of Photoshop work. At any given time I may have all of Adobe CS plus Office and a few other apps running -- and a gazillion fonts. Went to the store and saw the new 24" iMac. How would a new iMac compare to my late '04 1.8DP G5? On that same note, how would a new MacBook Pro compare to the above?
View 5 Replies View RelatedI'm looking for a new monitor to go with my MBP, and I'm stuck trying to choose between the ones listed above.
The 2407WFP is a couple of years old now I guess, but it's the rev A04 version, which supposedly fixed the (few) problems with what was otherwise meant to be a great screen. It's an sPVA screen.
I've heard good reviews of the G2410, with its LED backlighting. It's still a TN panel and I hear so much bad stuff about them.
The 2209WA is an eIPS panel which I like the sound of, but it's smaller and lower resolution.
The F2380 is a cPVA panel, the image quality looks better but I've heard bad things about blacks on this panel.
Anyone know where I can find the cheapest SSD's for a uMBP?I've already look around and the prices are ridiculous!
View 22 Replies View RelatedI am considering a purchase of a 17" unit. I will probably buy a base unit and then upgrade the memory and possibly the HDD myself (this is largely driven by procurement transaction limits). Is there experience here in adding a SSD to the 17in? I could manage with 256Gb, but have 500Gb drives reached the market yet?
View 5 Replies View RelatedI have a 17" 2.93 UMBP w/ 8GB RAM. I have two X25-Es as boot drives and use an external 1TB Caviar Black as my home folder. I rum virtual machine from the external.
My question is this: is it abnormal for a machine with 8GB of OWC RAM to page out (right now at 2:02 after boot page outs are at 421.5 MB). Usage is moderate (Safari, iTunes and a Parallels VM with 512 MB virtual RAM assigned). I'm thinking my RAM is either crap or defective any constructive.
I recently purchased a unibody macbook pro 2.8Ghz (awesome machine by the way) and was wondering whether would the LED screen get dimmer over time like the previous non unibody models?
When I had my powerbook and non unibody macbook pro, I had a habit of keeping the brightness at full and realize after a while it starts to get dimmer and dimmer. A good fren alerted me to try and keep the brightness at 50% to conserve battery life was wondering do u any of u notice the same dimming occuring on ur UMBP?
I miss my "apple" key. Does anyone make a apple key that would replace the command key on a unibody MBP?
View 2 Replies View RelatedJust noticed this on my uMBP 17" (the first 17" version), while running XP in Boot Camp.
GPU-Z is reporting that the 9600 M GT is running with only ONE PCI Express lane! NVIDIA control panel is showing the same thing!
Am I seeing things, or is it really only using 1 lane? The chip definitely supports x16.
See attached screenshots.
I was just looking for a definitive answer on whether or not it is possible to remove individual keys on a uMBP without opening it up and dissecting the innards. I have one key (delete) that I'd like to pop off to clean.
View 11 Replies View Relatedso i thought i might as well aksed you people here for some opinions.im in need of large capacity HDD for my uMBP. and i want the 640GB WD cause i heard good review for it, however the WD distributor in my country haven't stock it yet, and they say it might be a little bit as late as early january cause i need it urgetnly, here the question, the WD distributor in my country do have stock for 640GB but its the external one, the My Passport [URL]i have bad experiences in online shopping cause in my country the custom is terrible, and they took very long time to scan for shipment, so i thought is it okay if i buy the wd external one then i pry open the casing and put the harddisk inside my umbp ? are they basically the same drive ? and is the casing ( after opened) can be used with my older hard disk to be used as external one ?sorry for my broken english, but i need the answer as son as possible,
View 24 Replies View RelatedI've read all the horror stories about how the mid-09 MBP hard drive firmware update and non-Apple 7200 RPM HDDs don't get along. Most of these seem to be related to the use of a SATA 3.0 drive (which shouldn't matter, since mechanical hard drives can't even make use of the full SATA 1.5, but I digress).
I'm about to buy a new Mac, and, even though the Macbook, which doesn't seem to have these problems, would suit my needs just fine (my camcorder is USB and my digital cameras both use CF), I might spring for the MBP anyway (likely to get the additional 2" of screen space on the low-end 15", which has the closest resolution to what I am used to on my outgoing T60).
Obviously, I could pay Apple to upgrade to one of their 7200 RPM drives, assuming I get the 15". But that seems silly, since I can buy, for less than $100 (i.e., half the upgrade cost from Apple, plus I keep the old drive), a Hitachi Travelstar 500 GB 7200 RPM SATA 3.0 drive. My questions are:
1) Has anybody successfully upgraded to such a drive (or its 320 GB little brother, which is otherwise speced the same) in a mid-2009 MBP?
2) If so, did you have to downgrade the firmware as suggested in these forums?
3) If so, did you have to "tweak" the drive in any fashion to make it work?
I just had my i7 15' mbp 15 days ago. today, I just noticed a white stain on the bottom left of the lid (on the back). No matter how many times I tried cleaning it, it is always there. It is visible at low light conditions. Could this be a manufacturing defect?
View 4 Replies View RelatedI've got a new 15" uMBP and would like to find what you guys would recommend in terms of a lock/security cable?
View 7 Replies View RelatedFrom reviews, it looks like the Corsair 256GB SSD is not bad except the random write speed.
Anybody is using this SSD on the mid-09 uMBP? any issues? I'm considering a SSD for my mid-09 15" 2.53GHz uMBP, but it seems that several members have reported issues for using OCZ SSDs on mid-09 uMBP.
I bought a 13" uMBP pretty much as soon as they came out.
I am now noticing heat in the power pack - so hot I'm barely able to hold it once it has been plugged in for, say, 15 mins.
I also think that the battery is now getting uncomfortably warm in a way it wasn't initially, although nowhere near the temperature of the power pack.
Has anyone else experienced this or heard any reports of similar incidences?
Can anyone point me to a video or photo sequence showing how to remove the lid/display from the body of a mid/late 2009 uMBP 15" with as few as possible steps? Basically how to get the hinges off and separate the two parts as simply as possible.
View 3 Replies View RelatedI just received the monoprice male mini-display + male usb audio to female hdmi... when I connected it to my tv it worked great. I changed output for audio to usb and safari and vlc worked great(i.e. hd youtube clips play without hiccup, 1080p movies work, 720p tv shows work)
The only problem I had is when I open plex my sound suddenly goes from coming out of the TV to coming out of the built MBP speakers. What confused me is that sound effects ( when I raise or lower the volume using the shortcuts ) come out of of the tv speakers but the movie sounds come out of the MBP. I tried to look at settings in plex but I couldn't figure it out.
I am in the process of researching HD replacements for my 250Gb in my 13" uMBP as I would like to have more room for stuff. After searching threads here about replacements, it seems some people are having stalling and beachball issues with their replacement HDs in their uMBPs.
So here is my poll:
1. Have you replaced the HD in a uMBP (with motion sensor) with no ill effects?
2. If so, what brand and size HD? and....
3. What model uMBP
I'm pretty satisfied with the Marware cover, although it can be a little frustrating when typing quickly..I'm wondering if I should go back, return the Marware cover and pick up the iSkin.
So, for those of you that have any of these in comparing..which do you think is the best?
And yes, I did search and am aware threads like this exist..but I couldn't find any comparing all three, only iSkin vs. Moshi.
I'm trying to decide which product to buy and I was hoping for some advice.
First and foremost I want a device so that I may transfer my VHS tapes to DVD.
Live TV recording is secondary but for the price, I'd like to find the device that suits me best so I can continue to use it after i've transferred all my VHS.
Here are my concerns:
1) I'm going to be moving from the US to Ireland in a couple of months (not sure for how long, could be years+) Obviously there's the whole NTSC vs. PAL, ATSC vs. DVB.
I know with EyeTV 250 it's either or, any ideas if buying some sort of converter is an option (prices, quality)? If I bought just a PAL one, would I still be able to convert VHS or would it be completely unusable in the US?
2) I'd like some sort of HD/Digital abilities. From what I can tell TVMax is analog only and Blackmagic may also be but I can't find more specs on that.
Does this mean they'll be useless once the US undergoes the conversion?
So as of now I'm leaning towards EyeTV 250 but the question are there any forseeable problems with using a PAL to NTSC converter or using a PAL EyeTV in the US just to convert VHS.
I run a UMBP @ home and also have a work laptop connected to my LAN. I want to remote into my work laptop from my UMBP, but I am having trouble doing so. My work laptop has joint to the company domain and has Group Policy applied. However I made sure all the remote desktop firewall rules are open and I still can't remote into it. Work laptop is running Win7. My dad's pc is also a Win7 and I can remote into just fine.
View 2 Replies View RelatedI know there is another thread, but I wanted to make a poll so people could easily guage the problem.
If you have a post-WWDC 7200 RPM HDD in a uMBP, do you have the click-beep problem as described here:
[URL]
I bought a uMBP17 and the Speck hard shell for it. I was surprised at how much heavier the machine becomes with the armor on. So I've noticed that the hinge does seem to stress a bit with the extra weight of the shell.
Have you guys noticed that ? Is this something that I should be concerned about ?
