I am looking at the macbook pro's 13 or 15"
The 13 inch is 1552 Euros and the 15 is 1759 Is the extra 2 inch worth the money? I am wanting it to surf the net, graqphic/web design and matbe some video work.
I got a MacBook Pro back in April, my first Mac.
I love it so much. I'm really into video editing and HD video, but the problem is that my MBP is running out of harddrive space, and I'm longing for a bigger display and a better processor. (I have the 13" C2D). I'm going to pick up an iMac this Spring. But I wanted to know if I should stick to the Core i3 21.5, or spend more and go for the 27 inch.
list the differences between the 15" and 17" MBP's, with focus on the high res matte options.
The obvious difference is the larger&higher resolution display on the 17" and the extra 1.0 pound of weight and about $100 extra. The 17" also has no USB reader slot, but eSATA. The 17" is also 0.1" thicker.
Has there been a professional comparison of the two screens (gamut, contrast, etc), or have any of you done the comparison and formed an opinion?
View 1 Replies View RelatedThe new 27-inch iMac uses up to 365W vs 280W for the old 24-inch! (going by Apple's published max. power consumption numbers. I doubt they would lie because it isn't exactly favourable for them to put in falsely high numbers in an environmental report).
That means there's some extra beef behind the extra components. Perhaps the ATI 4670 is a bit overclocked and the 4850 runs a bit faster than the old iMacs? Admittedly that 2.8 GHz i7 is going to suck a fair bit of power - the recent 2.8 GHz i7 860 model runs at a 95W TDP, however, the quad core iMac isn't available until November. So it won't be using the i7 860, and my guess it is using another custom processor, something a bit more power efficient, somewhere in between the 55W TDP of the old iMacs and the 95W TDP of the i7 860.
The difference between the power consumption of the two computers is 85W. The old iMac had a 24-watt digital amplifier, this new one has two 17-watt amplifiers. That brings the delta down to 75W. Say the iMac's i7 processor has an 80W TDP. That now brings the delta down to 50W. The new display likely wouldn't increase power consumption because of the LED backlight.
I'm not sure if I'm missing much (OK, two extra RAM chips may use another few watts), but there is still a fairly massive 50W unaccounted for.
Just a bit of fat to chew on
I am trying to decide which of these two 27 inch imacs I should buy:
27 inch 3.06 core 2 duo model
27 inch 3.2 I3 model
Is the 27 inch 3.2 ghz I3 model a better value in terms of increased computer and graphics performance and is it better to get the 2nd generation model because of prior issues (i.e. yellow tinge)?
I am about to buy my first mac and am going with the new 27 inch iMac but I can't decide on the i5 or i7. Is the i7 worth the extra $200? As far as I know they both have the same components except for the processor. Also, from my research online, speeds don't look to be all that much faster with the i7.
View 4 Replies View RelatedIs the new 27 inch cinema display any different the the displays on the 27 inch iMac??
View 4 Replies View RelatedI was using my computer and it was just fine. I closed it carefully (as always) and left for a few minutes. When I came back and opened it up, the screen was completely pixelated. I turned it on and off and read several forums and tried cleaning the drives and nothing is working at all. As I've been working on it parts of the pixelation of bright colors have begun flashing a little bit. Not a lot but a little. Black doesn't seem affected by the pixelation but you can see lines in the white areas. Also when images are fading in and out, they don't become pixelated until they are at their brightest. When they are fading in and out they appear fine.The graphics card in my computer is a Nividia GeForce GT 330M. SO I'm guessing from this that the graphics card is damaged or whatever. I can't afford to have apple repair it for $400 and the nearest apple store to me is two hours away.
Info:
MacBook Pro, Mac OS X (10.7.4), Nividia GeForce GT 330M GraphicCard
I just got a mbp 2.26Ghz 13inch
with screen model 9C9E
I've read some got screen model 9C9F and more.
But I find my screen is not very impressive at all
infact, I think it's not much different form the UMB.
is there any difference between the 2.26 & 2.53's screen?
and some with the same 2.26Ghz model yet having different model of screen of different screen quality.
Yet mine have a bad color saturation as well as a very low brightness.
Is it normal to have what seems to be light bleed in on the sides? On black screens there is like a lighter line on the sides. Seems pretty evenly on each side.
View 1 Replies View Relatedmy screen on the macbook pro 13 inch model is very loose and it's been a month since i've purchased it is there any way that i can get the hinge fixed or replaced at an apple store?
Info:
MacBookPro
Do some one new to connect macbook pro 13in to big lcd screen. Do cable or others needed?
Info:
Mac Pro, Mac OS X (10.7.3)
My MacBook Pro 2010 15 inch screen shuts off randomly. The whole laptop doesn't shut off just the screen. It calls it a panic but I have to hold down the power button to shut it off when this happens or it will stay on the black screen.
View 1 Replies View RelatedMy 27inch iMac screen shuts off during screen saver and does not come back on unless restart machine?
Info:iMac, Mac OS X (10.7.3)
It'll be interesting to see if the screen in the 13" MBP announced yesterday is the same one that Apple quietly started putting in the MB a couple of months ago. Someone recently posted that Apple changed the display in their UMB after they complained about the washed-out look of the screen. I wonder how difficult it would be to get Apple to agree to a replacement based on the differences between the old and new displays.
View 4 Replies View RelatedMy MacBook Pro 15 inch mid 2010 model i7 processor is having problems when I close the lid and the computer goes to sleep. Heres how my problem is occouring. I close my macbook pro lid. After waiting about 10 min (my macbook sleep time) I lift the lid. Once I do this i see the screen.... for about 2 seconds and it suddenly goes black. I fix it by turning my brightness down 1 bar then turning it back up 1 bar. I dont remeber this happening on snow leopard it seems to be a lion issue and a lot of other users are having it.
Info:
MacBook Pro, Mac OS X (10.7.4), 15 Inch i7 processor Mid 2010 model
Is there a difference? Anything at all? I would expect Apple to make the 2010 standard res. screens worse in quality and earn more money since they have the higher res. available. I really like the 2009 glossy screen, but i have to be sure it is exactly the same this year. If they did something like that it's typical Apple.
View 2 Replies View RelatedWhenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem? I tried booting from the installation disk and repairing disk with "disk utility" but to no avail. Have also tried repairing disk permissions... Any idea how else should i tackle this problem? Currently i can only switch off my MBP by holding the power button (forcing it to shut down).
Info:
MacBook
Pro, Mac OS X (10.6.8), 15 inch 2.0 GHZ
My November 2011 17" MacBook Proi has on several occasions gone to a black screen, which requires hard shutdown and re-boot. It happens in two ways: coming out of sleep, the screen appears for a second and then goes black, and sometimes when jjust using the Mac.
It comes back on after re-boot with no apparent problems but seems to be occuring more frequently, so I need to get this fixed.
Info:
MacBook Pro (17-inch), Mac OS X (10.7.3)
I have a 2 month old rMBP Mid 2014 and i am experiencing horizontal lines in the middle and bottom of the screen. For example, If i was browsing a site and then close the window you can still see parts of the website in the middle of the screen. I took the laptop in for the technicians to have a look and they a blaming it on the software,claiming that Gfxcardstatus is causing the problem. The problem still persists even with gfxcardstatus turned off. Does Gfxcardstatus do this? Is it the Lcd or gpu failure? Take a look at the photos ....
Info:
MacBook Pro, OS X Mavericks (10.9.5)
Battery
I had a 11 inch air 1.4GHz/4GB/128GB for two weeks. I usually set the brightness to 75% and for consistent web browsing (no heavy flash) I can get about 5h15min battery life. I noticed someone here claiming 8+ hours battery on 13 inch so I decided to give it a shot.
I got a new 13 air with 1.86GHz/4GB/128GB yesterday and start to run on battery immediately. I was disappointed. The brightness was also set to 75% and I start to count the time from 25% while browsing MacRumors.com. And it only took 1h38m for battery descending from 25% to 0%. Again, pure web browsing and no heavy flash.
So here is my conclusion: On 75% brightness, 11 inch air's battery performs beyond advertised 5 hours and 13 inch's battery performs fair and normally should give you around 6h30m~7h.
Noise
I don't have equipments for measuring the noise, but while copying the same 10GB files from external drive to the machine, the fan noise from 13 inch is much louder than 11 inch.
Now I like my 11 inch more in general, although I really hate the 1366 x 768 screen. I don't know if I should sell the 13 inch or 11inch...
[edit]:
On my 11 inch air: battery capacity 4664
On my 13 inch air: battery capacity 6634
[edit2]:
I will do another test to see how long exactly my 13 inch can last after a full charge
I've heard that there have been some differences between the older and newer Macbook screens - I'm thinking about buying a reburb unibody macbook and want to know how significant the difference is. If it's big enough I'll use my student discount to get a new mac with an iPod and then sell the iPod for the price difference, but that is a lot more work and initial money spent vs just getting a refurb. Does anyone have any experience with both?
View 12 Replies View RelatedDoes the matte screen provide the same brightness, contrast and colour performance as the Gloss screen?
View 12 Replies View RelatedTo those contemplating on picking up the 11-inch MacBook Air or the 13-inch MacBook Air, I thought it would be helpful to list the differences between the two.
Below is what I've compiled so far (in no particular order):
1) SD Card Slot is on the 13" MacBook Air, not present on the 11"
2) Higher clock speed configurations on the 13" (1.4 GHz/1.6 GHz vs. 1.86 GHz/2.13 GHz)
3) 6MB of shared L2 Cache on the 13" vs. the 3MB on the 11"
4) 1066 MHz frontside bus on the 13" vs. the 800 MHz on the 11"
5) Larger capacity battery and an extra 2 hours of battery life on the 13" (7 hour 50-watt-hour battery on the 13" vs. 5 hour 35-watt-hour battery on the 11")
6) Slightly larger trackpad and more room for your palms while typing (hey, it's true!)
7) 16:10 1440 x 900 13.3" Display vs. 16:9 1366 x 768 11.6" Display
8) The 13" model weighs in at 2.9 pounds while the 11" weighs in at 2.3 pounds. .5 pound weight difference
If you have anymore differences between the two models, post below and I will add them to the list!
I am trying to use my HD Sansui 32 inch LCD TV as a monitor for my Macbook. I can't work out how to set it up properly. My macbook is running OS X 10.5.8. My TV supports 1920 * 1080 HDMI 60Htz NTSC and various other resolutions. I am using a mini DVI to DVI adapter and then a HDMI lead to the tv. Problem one is that when I switch the Macbook on and close the lid nothing comes up on the TV screen (meaning it is supposed to only driving one screen, the TV). If I do this with the VGA connection it will. Momentarily the apple symbol will come up and the little circle below it but then my TV says signal not supported.
If I have the Macbook lid open when I switch the computer on both screens will work and I can select 1080P, however it is very grainy and not pleasant to read text. I think it looks better using the VGA. I have heard of people getting nice crisp display with HDMI so I am wondering if I am missing something? Is there any other software that can be used to get better results? Which text smoothing settings should I use? Are there other settings? I am using it on my desk so I guess it is about 2 foot from me. I will post my display details in a minute but my computer details are the following:
2.2 GHz Intel Core 2 Duo
1 GB 667 MHz DDR2 SdRam
So I have a 1.8ghz dual G5 with 3gb of ram for work. I mainly work in Adobe CS and do a far amount of Photoshop work. At any given time I may have all of Adobe CS plus Office and a few other apps running -- and a gazillion fonts. Went to the store and saw the new 24" iMac. How would a new iMac compare to my late '04 1.8DP G5? On that same note, how would a new MacBook Pro compare to the above?
View 5 Replies View RelatedI'm getting one for school and i'm going to have to carrying it aroound quite a bit, so the 11-inch seemed appeling at first, but then i noticed that there is a few pros to the 13-inch than the 11 inch: There's an SD card slot on the 13 inch, which i could care less about, the screen has higher resoulotion, which i don't really care about eiether, but the one difference was that the 13 inch has two hours more battery life, which kinda got me thinking towards the 13-inch. So what do you guys think, is it impossible to work on the 11.6 inch and should i go for the 13 inch, or should i go with the ultra-portability of the 11-inch?
View 4 Replies View RelatedApparently there might be a way to convert the HDMI to a miniDV display.
Is this really possible?
Has anybody really achieved it?
What kind of cable/adapter do you need to buy?
Supposedly this was fixed with 10.6.2
Anyone else still experiencing this?
