My MacBook Pro is not showing my LaCie Rugged 3 Thunderbolt hard drive when connected. I can see from Disk Utility that it knows it is there, but in Finder I cannot see it.
Info:
PowerBook, iOS 7.1.2
I recently purchased two Lacie Rugged hard drives, a 500GB for client use (meaning, it is given to clients to review raw footage and then given back to me where I then make edits.) The 500GB is calibrated at 50% Mac usage and 50% other and it has been worked out fine thus far. The other hard drrive is a 2TB Rugged XL Hard Drive has not been used due to the pop up I get when clicking the LaCie Setup Assistant which reads "You can't open the application LaCie Setup Assisstant because PowerPC applications are no longer supported."
1.) What does "You can't open the application LaCie Setup Assisstant because PowerPC applications are no longer supported." mean?
2.) How do I fix it?
3.) Will fixing it effect my 500GB drive?
Info:
LaCie Rugged External Hard Drives, Mac OS X (10.7.3)
I have a Lacie Rugged 80GB with Firewire 400/800 and USB 2.0. I was using it just fine last night to back up my 12 PB. Then I yanked out the Firewire cord without ejecting it. Now, this morning it takes like 20min to mount. Then it says Read only, Time machine cannot write to this drive. I have tryed two different computers, all three interfaces and different cords. Now, It will not mount at all, no matter how long I let it sit. I hear the hard drive spinning, but will not mount and I can't see it in Disk Utility either.
View 2 Replies View RelatedI have three external drives daisy chained up to my iMac, an 80, 500 and 1TB. Recently the 500 has failed to show up on the desktop alongside the other drives. I can't remember exactly when it happened, but it may well have been after my computer crashed and forced me to shut it down using the power button.
All other drives appear to be fine, and the 1TB which is daisy chained through the 500 to the 80 shows up just fine. I've checked Disk Utility and there's no sign of the 500 drive there. However in System Profiler there is an "Unkown Device" next to the other drives in the Firewire section.
I've tried the 500 on a G5 and turned it on/off, restarted the computer and all the other usual things.
Since I tried to install Leopard and uninstalled it again as it has to many bugs (at least with my configuration) my external LaCie 500 Gb USB drive for back-up doesn't show on the desktop anymore. In disk repair the drive appears and repair shows "no problems". On an other internal disk I still have Leopard installed, and if I boot my G5 under Leopard the disk is visible and works fine.
Information:
G5 1,8Ghz mono; MacBook black
Mac OS X (10.4.10)
Tiger again after Leopard uninstalled
Odd stufff, I have a 500 gig Lacie ext HD that my user uses on her Vista machine...
I am setting up a replacement for the Vi$ta machine, which is a 24 inch imac.
I plugged in the ext HD and nothing happened after I powered on the ext HD.
I checked disk utility and it showed up but as a 2TB size ext HD...
I unplugged the Lacie and plugged it back in and all the info showed up correctly.
But ALL the buttons under "First Aid" are greyed out so I cant verify permissions, disk, or repair disk or permissions.
Information:
imac 24 inch
Mac OS X (10.5.8)
I am new to this forum and hoping for some advice with this hard drive issue.
I opened a brand new Lacie 500 GB Hard Drive. It is connected to my macbook via usb. I selected it as my hard drive destination in Time Machine and ran the backup option.
The hard drive did mount. About 5 minutes in the backup option failed - a time machine error: time machine backup failed.
I ejected the drive and unplugged it/turned it off and rebooted my laptop. Now the hard drive does not mount on my desktop however will show in disk utility. It lists with the Lacie name and another subdivision under the name.
When I try disk repair, erase or partition..I always get the same message: resource busy. After the error, the hard drive subdivision disappears leaving only one name on the list in disk utility. (It does not have the name underneath it).
I apologize for my semi technical description. I am new to mac and appreciate any advice on how to fix this issue. All I want to do is backup my laptop using the new hard drive with time machine.
I bought the LaCie Little Disk 320gb about a year ago and it has been working fine till recently..
The problem that I have is that the laptop that I use (Powerbook G4) doesn't recognize the HD anymore..
I have tried all cables (both firewire's and the usb) but nothing works..
I did try it on multiple computers (macbook's / imacs and even some windows computers) not one did recognize it.
(well the windows computer I used it on did recognize it but it cant open it and Windows Explorer stops working till you pull out the HD).
The only think I can think of is that I pulled out the HD to many times without safely removing it first..
I got a lot of data on the HD and I'd (offcourse) like to get it back,
I haven't been to the store yet (going somewhere this week).
Time machine is having problems backing up to my La Cie drive. It will start and then show the progress, but it stalls at a very low #(256 kb, for example).
Left it to do its stuff overnight and it never budged. Pulled this off of the console (after reading some other posts). Not sure if this is associated w/the problem, though.
8/2/09 10:28:45 AM mds[34] (Error) Import: importer:0x872000 Importer start failed for 89 (kr:268435459 (ipc/send) invalid destination port)
This error was reported pretty much every 4 seconds.
I erased and reformatted (mac os extended, journaled) the La Cie but that did not seem to work.
everytime i go to System Preference > Energy Saver > Options and tick show battery status in menu bar it doesn't work
View 4 Replies View RelatedI have a Lacie external hard disk that was originally formatted for PCs. I have some files there, but more importantly, my iTunes library is saved directly on the Lacie (I have everything on apple lossless, so they are some big files). I will keep using this PC while connected to the Lacie hard disk to syncro my iPod.
The problem is that I bought a mac now and I wanted the Lacie hard disk to be able to transfer files from mac to pc and vice versa. I have already read that I would have to copy the files that are on the Lacie, reformat the Lacie and then paste the files back. My only doubt is that if I do this reformatting, will I have any problems using the iTunes library while connected to my pc and iPod?
I just ask that because every time I changed any iTunes library folder on the computer, the iTunes would say that the music file couldn�t be found and ask me if I wanted to look for the file. I didn�t want to reformat the Lacie to later find out that I would have to �look for� every single music file, because that would be nearly impossible. I don�t know if I was able to make my question really clear�
I have a broken screen on my MacBook air and have an external screen attached via thundbolt and hdmi connection when I boot up the unit it only shows second screen on external no dock or desktop so can not see system preferences or anything, need to find a way so then when I boot up system the external automatically comes the default screen
Info:
g5 iMac, Mac OS X (10.5.8), W85270KTSDZ
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I've created a Snow Leopard boot disk using this method link. I created it on a 16GB CF Disk. I've tried it twice. First time I formatted the disk as eXfat with 1 partition. Next time I used Mac OS Extended for a 7Gig partition and fat32 for the rest.
Upon boot I get the normal install stuff like I do with the DVD, but then no hard disk shows up. I thought it was because of the eXfat which is why I tried again. I looked into the system profiler and I can see my seagate hard disk, but under disk utility it doesn't exist. My Sata DVD drive shows up though. If I boot off of the DVD I can see and install to my hard disk.
I'm trying to make a USB Disk because I'm planning on getting a SSD and I will be removing the Dvd drive.
This is a Mid 2009 Macbook.
I normally have my USB cable with me, so if I snap a few pics, I can just connect the USB cable to the camera and iPhoto will get all the photos off of it. But I can't access the videos I take with iPhoto, is there a way for my camera to show up as a drive in OS X so I can copy the video file(s) off of it?
View 6 Replies View RelatedBefore when I used to view pictures they show up in (from what I can remember) Picture...im not sure what else is missing but after a while they started showing up in colorsync which i didnt like then i deleted it and the pictures started showing up in quicktime. Can someone please tell me what is the application i can download so my pictures start showing up in an application that starts with "Picture" because it takes up less room
View 6 Replies View Related1. the Spotlight function of "Show all" does not response when I click on it. I did try it on another account on the same machine and the problem still there.
2. Right click on the Trash bin and selecting "Empty trash" does not do much. I have to go to Finder and selecting "Empty trash. Why is that?
3. In Finder if I am trying to search using the little search space at the top right as I type a couple of letters, it freezes, close unexpectedly and ask me if I want to report the error to Apple.
Are all the problem above related?
4. How can I get a new link in Safari 4 to open in a new tab and not in a new window?
I started using OS X Lion last week. For some reason, when I launch iTunes, the window has no close button, zoom button nor minimize button. Moreover, the Mac menu bar doesn't show up.Â
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
I used to have a PowerBook G4 and the 160GB Lacie Porsche Hard-Drive worked just fine, now, on the MBP it does not mount... System profiler doesn't even see it.. Any ideas? I have looked for drivers or other mac users with similar problems, but haven't found much. I have tried the obvious, and it seems to be a problem of communication betwen the machine and the hard-drive.. because surprisingly it mounted for a few seconds and I was able to see the data, however, it crashed when I tried to eject it and then it never mounted again..
View 4 Replies View RelatedA few months ago I bought a new LaCie "Little Disk" external 500 GB HDD. Has Firewire and USB power.
Formatted for both Windows and Mac (Fat32). Everything was going fine. One day the disk would not eject. That is when the problems started. I had to manually remove the disk without ejecting.
Having done this with my other LaCie external HDD without any future problems (it would always remount) I didn't think anything of it.
Since then, the disk will not mount on either the Mac or the PC. The disk will not mount using the Firewire or the USB power connectivity even though the blue power light is on.
When I open Disk Utility with the LaCie plugged in, Disk Utility crashes. When I open Disk Utility before the LaCie is plugged in and then plug the LaCie in afterwards, it crashes.
I tried plugging the LaCie in before booting my MacBook to see if that worked, but that method prevented the MB from booting at all!
Contacted LaCie about this but have yet to hear back. I'm convinced that this can be solved cleanly without any data loss. Suggestions?
I hooked it all up. MacBook sees the external drive. I get a Lacie set up icon on the desktop. Click it and I get password, do that and I get a bouncing arrow icon on the lower tool bar, then it goes away afte about two seconds...then nothing. This is for my MacBook Pro.
View 1 Replies View RelatedI have a mbp with retina display and is not reading my rugged lacie external hd connected via the 2 usb ports. The lacie model that I have is the 500 gb one with the 2 firewire ports and one usb. When you connect it via usb you have to plug use 2 ports one for power the other for info. I'm trying that in the mbp retina and is not recognizing it. It doesn´t appear in the disk utility nor in the system info under the usb ports.
View 4 Replies View RelatedMy MacPro internal drive died and I bought a LaCie external CD player. How do you connect it to the computer?
Info:
MacBook Pro, iOS 7.1.2
I just purchased a MacBook Pro running the latest Leopard OS. I hooked up a Lacie external HD using FW 800 to backup a bootable system of my complete HD. I used Intego Personal Backup. All seemed to go well and the backup showed up on my startup screen in Preferences. Problem is it will not boot my sytem up. Tried twice and cleared my Lacie prior to backup. The Lacie also showed up as a startup disc when I did an Option startup. Never had such a problem with Tiger but I always used FW which the MacBook does not have. I am now trying Carbon Copy Cloner to make a backup but it is not complete. Does the MacBook using Leopard have any special requirements for a backup such as a particular cable cable to use?
View 2 Replies View RelatedI have an iMac and use a LaCie backup to, um, backup my files. I am confused over how to transfer my iTunes library from my backup into my MacBook Pro's iTunes library.
Information:
iMac
Mac OS X (10.5.5)
I download the files from the Lacie external hard drive to the desktop and then upload to the seagate external...but I cant seem to drop it into the seagate hard drive. I am able to brings things from my seagate to the desktop but I need to upload the files from the Lacie to my seagate. Quicktime movies are on the Lacie and I need to get those movie clips to my seagate so I can use my PC to edit.
View 6 Replies View Relatedi am using macbook air lion ox 10.7.4 and uploading my pictures in hard drive lacie last time i did this was today morning and iPhoto was up and going fine. this evening i cannot access iPhotos at all. i cannot copy it it says error 38?there is another iphoto library in the same hard drive and its functioning fine.did i lost all my pictures???
Info:
Mac OS X (10.7.4)
My Lacie external Thunderbolt drive won't index. I've tried adding/deleting it to the privacy tab in Spotlight prefs. No luck.
View 9 Replies View RelatedThe USB port of the MacBook Air has very low power and it is not being able to power my LaCie 250GB drive without having the hard drive connected to its independent power source. i am having to plug in not only my computer to external power, but i also have to connect the drive to an independet power source. can someone recommend a drive that works on with the MacBook Air that can work without independent power?
View 6 Replies View RelatedIs this for the future MacBook Pro Airs?
View 4 Replies View Related