i am using macbook air lion ox 10.7.4 and uploading my pictures in hard drive lacie last time i did this was today morning and iPhoto was up and going fine. this evening i cannot access iPhotos at all. i cannot copy it it says error 38?there is another iphoto library in the same hard drive and its functioning fine.did i lost all my pictures???
Info:
Mac OS X (10.7.4)
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I hooked it all up. MacBook sees the external drive. I get a Lacie set up icon on the desktop. Click it and I get password, do that and I get a bouncing arrow icon on the lower tool bar, then it goes away afte about two seconds...then nothing. This is for my MacBook Pro.
View 1 Replies View RelatedAfter doing a clean install of Snow Leopard and copying iPhoto to the fresh hard drive and trying to open it, I get this error.iPhoto quit unexpectedlyClick Reopen to open the application again. Click Report to see more detailed information and send a report to Apple.Inside the error report:Dyld Error Message
View 3 Replies View RelatedMy Lacie external Thunderbolt drive won't index. I've tried adding/deleting it to the privacy tab in Spotlight prefs. No luck.
View 9 Replies View RelatedI have a 13" macbook running OSX. I recently bought a 1 TB Lacie Lacinema Premier to load all my dvd's on to for when I go on trips. My issue is, that I can't figure out how to put the DVD's on the the hard drive. My computer sees the HD fine.
View 2 Replies View RelatedI am new to this forum and hoping for some advice with this hard drive issue.
I opened a brand new Lacie 500 GB Hard Drive. It is connected to my macbook via usb. I selected it as my hard drive destination in Time Machine and ran the backup option.
The hard drive did mount. About 5 minutes in the backup option failed - a time machine error: time machine backup failed.
I ejected the drive and unplugged it/turned it off and rebooted my laptop. Now the hard drive does not mount on my desktop however will show in disk utility. It lists with the Lacie name and another subdivision under the name.
When I try disk repair, erase or partition..I always get the same message: resource busy. After the error, the hard drive subdivision disappears leaving only one name on the list in disk utility. (It does not have the name underneath it).
I apologize for my semi technical description. I am new to mac and appreciate any advice on how to fix this issue. All I want to do is backup my laptop using the new hard drive with time machine.
All of a sudden my macbook pro won't recognize my Lacie hd. I changed f/w cable and plugged external hd into an older mac but the icon does not show up on either. The drive powers up when connected either mac's but still on icon. How can I get the data off of the drive?
View 3 Replies View RelatedI have a G5 (Late 2005) and I just bought a LaCie Quadra 500GB hard drive last week and I have it connected with Firewire 800. I was away for the weekend and left the surge protecter unplugged while I was gone. I came home today and plugged everything back in and powered up. My G5 does not recognize the LaCie Drive. It powers on and I can hear it running, but it will not mount on the desktop. I checked the cables and everything is connected.
Information:
G5 Dual 2.3 GHz
Mac OS X (10.4.6)
I have what I thought was an external FW HDD made by LaCie. In checking a backup log, I noticed that my supposedly LaCie HDD is actually a Hitachi drive. Does anyone know if LaCie actually manufactures any hard drives or do they just put other drives in all their enclosures?
View 2 Replies View RelatedSorry if i posted this in the wrong section. I have a LaCie d2 Quadra 500GB hard drive that has a broken power brick (for the second time) and i'm wondering if it's possible to take out the hard drive and install it in a Mac Pro (2010, 8 Core, 2.4GHx)?
View 5 Replies View RelatedI'm on an early 2008 mac pro - used to be on a Powerbook G4. I have a 300 GB LaCie d2 Extreme external HD connected via firewire 800. Both are in 10.5.2. While on my powerbook, the drive behaved normally - fell asleep after no use, then awakened when I needed to access something. On my new mac pro, the drive behaves strangely. I only use it for backup, so it's only accessed once a day. The rest of the time I do not use it. When it's not in use, the drive sporadically wakes and sleeps. I've tried to pinpoint the cause to no avail.
I've tried all the usual suspects: browsing the forums, checking the "hard disk sleep" preference in energy saver, switching the firewire 800 cable with usb and firewire 400, watching activity monitor to see if there's a program accessing the drive (haven't found anything, but that doesn't mean it's not there). None of it works.
I have a 500 GB LaCie hard drive that I bought 11 months ago, so its still under warranty. It's formated with two partitions on it: Time Machine Backups and Storage which are both 250 GB. I also have windows installed on my mac via bootcamp and i have a program installed called MacDrive which allows me to view the contents of my mac hard drive and external hard drive.
Ok, so about a week ago, my hard drive wouldn't mount on my mac. I couldn't see it in Disk Utility or the Finder. It's not making any weird noises and sounds like its running normally, so i don't think anything is physically wrong with the hard drive. I booted up windows and plugged it in and this is what happened.
[URL]
I pressed OK and windows asked me what I'd like to do with the two partitions. I chose "Open files in folder" or whatever that option is and i can see my files, open them, and copy them, even the time machine partition. But when i go to my computer and click one of the partitions, it shows this.
[URL]
This EVEN shows on the Macintosh HD which worked fine before. So, does anyone know what the problem is? Should I try reformatting the external hard drive in windows? Should I reinstall MacDrive?
I had just purchased a Lacie 500GB xternal drive for my G5, I also have another xternal drive hooked up which is a Western Digital. I copied everything , music video files ect... onto the Lacie drive to clean up the WD drive, now when I went to clean up the new Lacie drive the files I deleted are gone but it is not freeing up any space. I went to disk utilities and re-formatted but it wiped it clean, is there such a way to delete a few files here and there and gain the space they were taking up without going this route?
View 6 Replies View RelatedToday I received my brand new LaCie grand 1TB external hard drive. So I formatted it on my vista laptop and put stuff like my documents music and videos on it as I am getting a macbook pro next week. I've gone to my mates who has an iMac this eve with my hard drive and realized as I formatted it on vista its in read only mode and i cannot edit it. I have put all the files i need on my mates leopard imac so I am happy to erase the hard drive and format it to mac.
View 6 Replies View RelatedI have had a Lacie 500gb external hardrive formatted and used with time machine on my macbook pro for about two years now. I haven't had any problems until recently. When I plugged it in, it wouldn't mount. I opened disk utility and it was visible but showed as unmounted and I wasn't able to mount them manually from there.
Info:
MacBook Pro, Mac OS X (10.7.3)
Odd stufff, I have a 500 gig Lacie ext HD that my user uses on her Vista machine...
I am setting up a replacement for the Vi$ta machine, which is a 24 inch imac.
I plugged in the ext HD and nothing happened after I powered on the ext HD.
I checked disk utility and it showed up but as a 2TB size ext HD...
I unplugged the Lacie and plugged it back in and all the info showed up correctly.
But ALL the buttons under "First Aid" are greyed out so I cant verify permissions, disk, or repair disk or permissions.
Information:
imac 24 inch
Mac OS X (10.5.8)
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes... I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before. Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer. I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps. I tried plugging the hard drive into an iMac as well, but it did not show up either.
I just purchased a Western Digital Scorpio Blue 640GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive to replace my stock 120GB HD. I am really excited to have the extra space. I purchased this MBP a few months ago and would like to do a fresh install of Leopard. I have an external hard drive that I have not used yet and was wondering of the best way to install Leopard on the hard drive and then add my itunes library and iphoto library to the fresh 640gb hard drive. What kind of score do you imagine I will have once I upgrade the hard drive and bump the Ram to 4GB.
View 2 Replies View RelatedI have recently bought a new MacBook. I initially thought it would be better to run iPhoto from the external hard drive, but after moving some things around I now want to run it straight from the MacBoook hard drive.
I tried copying the library from the external hard drive to the MacBook but I keep getting the following message....
"You can�t copy �iPhoto Library� because it has the same name as another item on the destination volume, and that volume doesn�t distinguish between upper- and lowercase letters in filenames."
I recently switched over to a Mac from a PC which I've had for years. Since I never had a photo storage program on my PC, all my photos were kept in folders on my hard drive. When I got my Mac, all my photos were imported into iPhoto and now I simply use iPhoto for everything I upload. My question is, can I delete the old photos (now imported into iPhoto but still on my hard drive in seperate folders) from my hard drive to save space without deleting them from iPhoto? I checked my settings and I do have the "copy to iPhoto library" option checked but I don't know if that makes a difference. Any information would be helpful - it would be nice if I knew I could delete photos that are essentially duplicates to save space on my hard drive.
Info:
MacBook Pro
How do I move pics from iphoto to ext. hard dirive?
View 2 Replies View RelatedI want to copy all my i photo pictures for the last 12 months i have saved and save them on to an external hard drive, i have tries to copy and paste all at once but it only will let me do one picture at a time!!
Info:
MacBook Pro
I recently purchased two Lacie Rugged hard drives, a 500GB for client use (meaning, it is given to clients to review raw footage and then given back to me where I then make edits.) The 500GB is calibrated at 50% Mac usage and 50% other and it has been worked out fine thus far. The other hard drrive is a 2TB Rugged XL Hard Drive has not been used due to the pop up I get when clicking the LaCie Setup Assistant which reads "You can't open the application LaCie Setup Assisstant because PowerPC applications are no longer supported."
1.) What does "You can't open the application LaCie Setup Assisstant because PowerPC applications are no longer supported." mean?
2.) How do I fix it?
3.) Will fixing it effect my 500GB drive?
Info:
LaCie Rugged External Hard Drives, Mac OS X (10.7.3)
I think my problem started after partitioned my MacBook's hard drive. The thing is that when i click some apps (Skype, VLC etc.) they show up in the dock, but they just keep on bouncing, and when they stop bouncing after a minute it says "Application is not responding".
Info:
MacBook Pro, Mac OS X (10.7.3)
Is this for the future MacBook Pro Airs?
View 4 Replies View RelatedI just purchased a MacBook Pro running the latest Leopard OS. I hooked up a Lacie external HD using FW 800 to backup a bootable system of my complete HD. I used Intego Personal Backup. All seemed to go well and the backup showed up on my startup screen in Preferences. Problem is it will not boot my sytem up. Tried twice and cleared my Lacie prior to backup. The Lacie also showed up as a startup disc when I did an Option startup. Never had such a problem with Tiger but I always used FW which the MacBook does not have. I am now trying Carbon Copy Cloner to make a backup but it is not complete. Does the MacBook using Leopard have any special requirements for a backup such as a particular cable cable to use?
View 2 Replies View RelatedI have an iMac and use a LaCie backup to, um, backup my files. I am confused over how to transfer my iTunes library from my backup into my MacBook Pro's iTunes library.
Information:
iMac
Mac OS X (10.5.5)
The USB port of the MacBook Air has very low power and it is not being able to power my LaCie 250GB drive without having the hard drive connected to its independent power source. i am having to plug in not only my computer to external power, but i also have to connect the drive to an independet power source. can someone recommend a drive that works on with the MacBook Air that can work without independent power?
View 6 Replies View RelatedI would like to move the application IPhoto to my external hard drive. Is there an easy way (or through a software program) to do this?
View 1 Replies View Related