Laptops :: Clone My MacBook Pro To A Lacie Exteral Drive?
Nov 13, 2009
I just purchased a MacBook Pro running the latest Leopard OS. I hooked up a Lacie external HD using FW 800 to backup a bootable system of my complete HD. I used Intego Personal Backup. All seemed to go well and the backup showed up on my startup screen in Preferences. Problem is it will not boot my sytem up. Tried twice and cleared my Lacie prior to backup. The Lacie also showed up as a startup disc when I did an Option startup. Never had such a problem with Tiger but I always used FW which the MacBook does not have. I am now trying Carbon Copy Cloner to make a backup but it is not complete. Does the MacBook using Leopard have any special requirements for a backup such as a particular cable cable to use?
View 2 Replies
ADVERTISEMENT
Sep 15, 2009
Can anyone explain to me why when I burn a full length film on dvd from my PC using DVD Clone, I can rip the dvd and burn it from the hard drive without compressing. A very simple process. But on the mac the dvd has to be ripped with MTR, or similar, then compressed, then burned using Toast or Popcorn or something similar. Why are these added steps not necessary on a PC. I don't understand.
View 1 Replies
View Related
Nov 15, 2010
When I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
View 8 Replies
View Related
Sep 10, 2010
I had some problems with my 17" MacBook Pro and needed a replacement immediately. The Apple Store didn't have a 17" that met my requirements so I bought a 13" that I plan to give to my wife to replace her 13" non-pro.
So. I'm ordering a 17" over the Internet. When it arrives, I'd love to avoid ALL the configuration that I just went through to get this new 13" setup like my old 17". Is there any way to completely clone the drive in my 13" MBP completely and transfer the data to the new 17" MBP when it arrives?
View 6 Replies
View Related
May 18, 2012
I hooked it all up. MacBook sees the external drive. I get a Lacie set up icon on the desktop. Click it and I get password, do that and I get a bouncing arrow icon on the lower tool bar, then it goes away afte about two seconds...then nothing. This is for my MacBook Pro.
View 1 Replies
View Related
May 4, 2010
Gonna turn in my MBP later this week, because of a broken hard drive. What do I do before turning it in? Should I clone the drive (for backup) and then format and zero it out, to remove personal information?
View 5 Replies
View Related
Sep 27, 2010
I have an iMac and use a LaCie backup to, um, backup my files. I am confused over how to transfer my iTunes library from my backup into my MacBook Pro's iTunes library.
Information:
iMac
Mac OS X (10.5.5)
View 7 Replies
View Related
Jun 6, 2012
i am using macbook air lion ox 10.7.4 and uploading my pictures in hard drive lacie last time i did this was today morning and iPhoto was up and going fine. this evening i cannot access iPhotos at all. i cannot copy it it says error 38?there is another iphoto library in the same hard drive and its functioning fine.did i lost all my pictures???
Info:
Mac OS X (10.7.4)
View 1 Replies
View Related
Aug 30, 2014
My Lacie external Thunderbolt drive won't index. I've tried adding/deleting it to the privacy tab in Spotlight prefs. No luck.
View 9 Replies
View Related
Nov 23, 2010
I recently bought a Macbook Pro with a 200gb hard drive. Right now I am running bootcamp dual-booting OSX 10.6.5 and Windows7 100gb partitions each. I just got done configuring everything and then my friend offered me a 500gb hard drive for $50 so of course I had to buy it.
I am wondering if it is possible for me to clone the hard drive I currently have to the new 500gb hard drive and then extend the partition sizes so I don't have to go through and reinstall everything on the Windows side again.
View 2 Replies
View Related
Mar 28, 2009
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
View 1 Replies
View Related
Jul 19, 2009
I have a Macbook (about a year and a half old) with 250 G hard drive which is partitioned in half. One half has Mac Os (leopard) and the other bootcamp partition is Windoze xp. I use both equally. I am planning to get a 500-750 G 2.5 inch hard drive and clone my entire hard drive to it so I will have more room (and also a good backup if the need ever arises). Since my drive has BOTH the Mac os and the bootcamp partiton with windoze on it, I need to clone them both over to the new drive. I believe superduper just clones the OS portion and I really don't want to re-install the windows stuff unless i have to! I read that winclone can clone the windoze partitian. SO THIS IS MY PLAN. I AM NOT SURE IF THIS WILL WORK. Is this right? Did I leave anything out? Is there a better way?
1. Get new larger drive and put in a separate powered enclosure
2. Connect to my macbook with usb connector
3. Use superduper to clone the Mac Os to the new drive.
4. Use Winclone to clone the bootcamp (windoze) partition to the new drive
5. Replace the old smaller drive with the new drive.
I think this would work, but am not sure how or when i have to partition the new drive to work with winclone. or does winclone do this automatically?
View 14 Replies
View Related
Apr 18, 2010
Can I make a disk image of my current MB Pro (early 2008) and copy it to my new i7 MB Pro to retain all my docs and programs?
View 13 Replies
View Related
Nov 2, 2008
The USB port of the MacBook Air has very low power and it is not being able to power my LaCie 250GB drive without having the hard drive connected to its independent power source. i am having to plug in not only my computer to external power, but i also have to connect the drive to an independet power source. can someone recommend a drive that works on with the MacBook Air that can work without independent power?
View 6 Replies
View Related
Jul 23, 2010
I'm going to be swapping the 250 GB drive in my 2008 MBP Penryn (17) for a Seagate Momentus 500/7200rpm drive. There are two ways to go. One is to put the new drive in an enclosure and use SuperDuper or CCC to clone the main HD and then swap them. The other is to use Time Machine. That means installing the new drive blank, boot from the OS disk and format. Then go to the most recent TM state and restore. My available external HD is the FW800 Western Digital Studio. It has space for a partition big enough for the cloning. The case coming with the Seagate is the Other World Express USB2. I have good pdfs on the install procedure. Need to remember to print them, first.
View 8 Replies
View Related
Sep 1, 2014
I want to find the best way for a new college student to back up her MacBook Air files. Can she use cloning software and an external hard drive? I'm unclear if the Air supports attaching an external hard drive.
View 7 Replies
View Related
Jul 4, 2012
I have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.
My current hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
View 8 Replies
View Related
Sep 13, 2009
I just cloned my hard drive to a new and bigger drive. I did the OSX 10.5.8 update on the old western digital drive as a safety precaution, so that if it screwed up I would still have a good copy on my new Seagate barracuda. The update looks to have gone well and I will be waiting for a couple of trial days before backing the drive up again. My question is, when I clone the drive again(to the new seagate) how will that work? Should I erase the existing disk image(10.5.7) on that drive or will it overwrite the existing image with the new 10.5.8 one? This is the first time I have used carbon copy and don't really know all the in's and out's of it.
View 1 Replies
View Related
Dec 12, 2010
I using a LAcie mini HUB to backup my macmini, store photos on, to store my itunes library on, and my iphone and ipad backups. Basically my whole life is on there. Well, my macmini does not recogize it anymore. I tried connecting it to my MBP and that does not recognize it. THe lacie drive has light that glows when it is turned on, but it looks like it is pulsing.
View 5 Replies
View Related
Aug 30, 2010
I have a Macbook running on snow leopard and I wanna upgrade my internal hard drive as it is currently too small. I downloaded Carbon Copy Cloner and cloned my entire hard drive to an EXTERNAL HARD DRIVE. Now, I have that new internal hard drive from wester digital. What do I do with it? replace the current internal hard drive with the new harddrive and then how do I get the data from the external hard drive with my cloned data to the fresh western digital? Do I boot first from external hard drive etc? I am not sure what to do now?when I was given the option which hard drive to clone (or which part of the hard drive to clone) there was also the option to clone "Install Disk". I don't need to clone that, right?
View 3 Replies
View Related
Oct 18, 2009
I have a Early 2008 White Macbook with a 160GB 5400RPM Fujitsu drive that is driving me mad. it is far too small and i have nowhere to store my RSS feeds and podcasts from iTunes anymore. also, it boots really slowly because of all the applications and HD podcasts on the drive. I am considering getting the Seagate Momentus ST9500420AS ( the one without G-Force Protection ) because it is a 7400RPM drive with a 500GB capacity. Has anybody had any problems with this drive in their macbooks or in general? Would the vibration/noise be an issue? I'm also considering the Scorpio Blue and Toshiba MK5055GSX because they're very power efficient, but at 5400RPM, they are slower. I'd love to see boot times in particular improve. There is already 2GB of RAM in the machine, so that isn't the problem.
View 4 Replies
View Related
Jan 8, 2010
I have a MacBook Pro 15 (2006) 2 ghz core duo, 2 gigs ram, & 100 gig 7200 RPM hard drive. I would like to change the the hard drive out to a larger one, but I'm seeing all kind of reviews & I'm not sure which ones to put more weight on. I have been looking at a 320 Gig or the 500 Gig. Looked at the Seagate, WD, & the Hitachi. I want to stay with the 7200 RPM. I also know there can be an issue with the, shock or drop sensor on the hard drives not being compatible with the laptops shock sensor, as well as heat & noise issues. I will state that this is my first Mac since the late 80s. But that I have a several very good friends that are long time Mac users and that have done this type of switch out, so while I know that the switch out is more complicated than some I have good tech support on that side of this switch out.
View 1 Replies
View Related
Apr 9, 2010
My Macbook 1.83 GHz needs a replacement optical drive. Will the one from my iBook 800 MHz G4 work and fit in?
View 1 Replies
View Related
Aug 20, 2010
i hear its possible to make a install emergency disk using a flash drive, i purchased a HP USB 16GB flashdrive v 165w, [URL]
i formated the drive as a Guid Partition, ignored preferences and all the stuff i could find online to see to it that i did it right but no go,
can anyone tell me if this drive is incompatible or which one i should exchange it for?
i tried cloning my original OSX Leopard DVD and i get errors when from both CCC and Super Duper,
View 8 Replies
View Related
Jul 6, 2009
I have three external drives daisy chained up to my iMac, an 80, 500 and 1TB. Recently the 500 has failed to show up on the desktop alongside the other drives. I can't remember exactly when it happened, but it may well have been after my computer crashed and forced me to shut it down using the power button.
All other drives appear to be fine, and the 1TB which is daisy chained through the 500 to the 80 shows up just fine. I've checked Disk Utility and there's no sign of the 500 drive there. However in System Profiler there is an "Unkown Device" next to the other drives in the Firewire section.
I've tried the 500 on a G5 and turned it on/off, restarted the computer and all the other usual things.
View 2 Replies
View Related
Dec 6, 2008
I just got an external LaCie hard drive with FireWire 400 to use when the HD in my iBook G4 dies (any moment now...). But now I'm wondering if I can use the LaCie as the main drive (boot from it, install Leopard on it) or was it built to handle just occasional back ups?
View 5 Replies
View Related
Feb 12, 2009
I have a 13" macbook running OSX. I recently bought a 1 TB Lacie Lacinema Premier to load all my dvd's on to for when I go on trips. My issue is, that I can't figure out how to put the DVD's on the the hard drive. My computer sees the HD fine.
View 2 Replies
View Related
May 16, 2008
I have purchase a new hard drive for my MacBook Pro Intel 2 Core duo and know how to do it, but once it is installed in the machine, I want to know how to install the operating system. The computer now is almost empty (only a few photos I have backed up) so there is no need to transfer any data. Do I just use the discs that came with it? Please tell me how I restore the system with this new hard drive.
View 8 Replies
View Related
Aug 11, 2009
There has been an ongoing issue with new MacBook and MacBook Pro computers where the system will pause for a second or two and make a clicking sound, and then continue functioning normally. This problem has to do with models containing a 7200RPM 500GB hard drive from Seagate, where the drive randomly stalls and beeps, causing a pause in the active system processes that can last up to 10 seconds. As reported in this CNET article, Apple is looking into the problem and a fix should be out shortly.
Both brand-new and slightly older models of the Unibody MacBook computers may be affected, and currently there does not appear to be a fix; however, if you are experiencing this problem, the best course of action is to wait for a fix from Apple. Some people have recommended reinstalling the operating system and performing PRAM and SMC resets, but this issue appears to be a firmware incompatibility so changing the operating system setup or firmware settings will not help.
Keep in mind that this behavior is not the same as when a hard drive is dying, where regular clicks and pauses happen, followed by spinning beach balls when the system cannot access the storage media. This AppleInsider article links to a couple of YouTube videos that show how this behavior manifests itself, so check them out if you think your system has this problem. When the fix is released, it should be in the form of a firmware update so keep an eye out for one in the near future. Read this Apple Support Discussions forum thread about beeping, clicking, and freezing hard drives.
View 1 Replies
View Related
Jul 14, 2009
I'm planning to replace my boot hard drive with a pair of RAID0ed SSDs. In order to familiarize myself with certain techniques I have build a software RAID0 from two 160 GB Maxtor SATA I hard disks. That went pretty much without problems. The two HDs are now sitting in position 1 and 2 in my Mac Pro.
The problem arises when I try to clone my boot drive onto the new RAID 0 drive. I was using disk utility and got an error message. Then I thought my fault was using disk utility from the HD which I wanted to clone and booted from the Leopard install disk. I then used disdk utility from that source to clone the HD boot drive to the RAID. Again I got the error.
What is going wrong? Do I have to approach this completely different?
View 8 Replies
View Related
