Power Mac G5 :: LaCie 500Gb USB Drive Doesn't Show On Desktop - How To Fix It
Nov 13, 2007
Since I tried to install Leopard and uninstalled it again as it has to many bugs (at least with my configuration) my external LaCie 500 Gb USB drive for back-up doesn't show on the desktop anymore. In disk repair the drive appears and repair shows "no problems". On an other internal disk I still have Leopard installed, and if I boot my G5 under Leopard the disk is visible and works fine.
Information:
G5 1,8Ghz mono; MacBook black
Mac OS X (10.4.10)
Tiger again after Leopard uninstalled
Just started partitioning my new LaCie 500GB External Drive using OS Leopard and am wondering how long the process usually lasts. My LaCie icon has disappeared from the desktop and my Disk Utility has been saying "Creating Partition Map" for about an hour.Am I on the right track and need to wait, or is does this mean the Disk Utility is frozen, etc.
I just got a new flash drive and it worked fine on my iMac yesterday, and now suddenly it no longer appears on the Desktop or anywhere else on the computer that I can find. But when I pulled it out of the USB drive, it said the device was not removed properly, so it must have recognized something was connected.
I have had a Lacie 500gb external hardrive formatted and used with time machine on my macbook pro for about two years now. I haven't had any problems until recently. When I plugged it in, it wouldn't mount. I opened disk utility and it was visible but showed as unmounted and I wasn't able to mount them manually from there.
My Maxtor 500 external hard drive has suddenly stopped appearing on my desktop. My other external drives appear. I've tried hooking the drive to my MacBook Pro with the same results. The drive however, seems 'active'. The light on the front of the drive does its usual flashing routine when plugged into a new machine. I've never had a crashed drive before. Does it sound like this is what has happened, or does anyone have a clue as to what I should do?
I just purchased the Lacie 1TB hard drive. I've plugged in the power wire and the 800 fire wire. The setup assistant is supposed to appear on my desktop, but it doesn't. Do I have to plug in all the wires that came with the HD?
I have three external drives daisy chained up to my iMac, an 80, 500 and 1TB. Recently the 500 has failed to show up on the desktop alongside the other drives. I can't remember exactly when it happened, but it may well have been after my computer crashed and forced me to shut it down using the power button.
All other drives appear to be fine, and the 1TB which is daisy chained through the 500 to the 80 shows up just fine. I've checked Disk Utility and there's no sign of the 500 drive there. However in System Profiler there is an "Unkown Device" next to the other drives in the Firewire section.
I've tried the 500 on a G5 and turned it on/off, restarted the computer and all the other usual things.
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.) I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error. I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes) Format :Mac OS ExtendedAvailable : Owners Enabled :NoUsed : Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
I have a G5 (Late 2005) and I just bought a LaCie Quadra 500GB hard drive last week and I have it connected with Firewire 800. I was away for the weekend and left the surge protecter unplugged while I was gone. I came home today and plugged everything back in and powered up. My G5 does not recognize the LaCie Drive. It powers on and I can hear it running, but it will not mount on the desktop. I checked the cables and everything is connected.
The USB port of the MacBook Air has very low power and it is not being able to power my LaCie 250GB drive without having the hard drive connected to its independent power source. i am having to plug in not only my computer to external power, but i also have to connect the drive to an independet power source. can someone recommend a drive that works on with the MacBook Air that can work without independent power?
I have just bought a LaCie Desk top drive and when I click the Setup assistant it said that Power PC applications are no longer supported. How I can do this?
I have used the disk for a number of years - all appeared to work fine - I am now backing up my data and only get Very slow transfer speed using firewire 800 - 2 hrs to transfer 1.36 Gb. Disk is connected to a Dual 1.8 Ghz Power PC G5 with firewire 800 - another d2 disk is connected to it with firewire 400 and I have just connected a Maxtor disk using firewire 400 to that. I have tried Updated the firmware (it did require it), tested the device alone on both 800 and 400 connections both slow. Restarted everything and used disk repair to check and repair the disks - repaired permissions on the startup disk.
Connected all the devices together again | LaCie 800 - LaCie 400 - and Maxtor 400. It sends data to all the other devices fast (~ 3 min for 1.6 Gb) through the LaCie 800 disk connection!, but does not send data to the LaCie 800 fast at all. Tested the other devices alone as well - they are all fast. Have also performed a TechTool Pro Ver 4 test on the the disk (Disk type ST325082 3A 232.89 Gb LaCie d2 External LUN0 revision 3.03) Passed the surface scan, disk controller and read write tests. Is the disk failing?
I am running my Lacie 500gb (porsche design) wirelessly through an Apple Airport Extreme and accessing them on my Powerbook G4. Lacie is connected to AE through USB, and has 377gb worth of data, no partitions.What happened: I tried to put a very small .srt file on the hard drive, but it kept giving an error essage, "Cannot copy file blah blah... file name too long or contains characters unreadable" or something to that effect. After a number of attempts it FINALLY appeared to load.Problem: Now when I access my Lacie wirelessly all file and folder icons disappear after a millisecond, but the drive info still says 377gb used. If I connect to the Lacie through USB the icons are as they should be, except the problem .srt file only appears as the name with no icon. If I click on the .srt file that one file disappears, so I can't delete it, open it, or do file repair on it.
One wired thing I realize when using Leopard is that whenever I mount or connect a drive, it does not show up on the desktop. But in facts that the drive is connected and only shows at the side bar under the Shared panel.
I have a number of folders on my desktop that contain movie files, jpeg files, you name it. When I try to import from the desktop, the import media window only shows the files and not the folders they are in! I have included a screen shot of what my window looks like when I select the desktop to import media. Again, I have a number of folders that don't show up, only the files in them. This is maddening when trying to import files! I know i can move the files to my hard drive but i am used to desktop work flow.
I've noticed over the last few days that whatever i save, (word doc, iphoto, e-mail, iweb, final draft scripts) or create a new folder... it doesn't show on the desktop unitl i either restart the machine or log out and then log back in... and then all the files that haven't been appeared at the time show up.Any ideas on how to stop this without giving my machine a clean instal?
My external drive has been used once. It was formatted, partitioned and files were saved on a mac. It showed up on a friends computer running Linux, and it showed up on my PC at home, but it hasn't been turned on since (about two weeks). This is where the problems begin. A few days ago I purchased a new enclosure for my HD (Nexstar 3.5). I took the HD out of it's old enclosure and put it in the new one (I needed the new enclosure for school purposes). I got to school today and plugged it in to the mac, but the drive didn't show up on the desktop. I tried to connect with Firewire 400, 800 and USB 2.0 but no luck with any of them (a USB key worked fine). Just to make sure it was working, I got home plugged it in to my PC and it showed up instantly.
From looking at other threads regarding this issue they all say I have to access the Utility menu. The only problem is since the mac I need to use is a school computer I can't access the Utility menu. It says I don't have authorization to use that menu, and won't allow me to go any further.
I don't know what to do from here. I can't reformat the drive because there is rather important info on there that hasn't been backed up yet. What can I do?
I have tried every type of disc in my drive and it doesn't show up. I hear it spin up but then nothing.
Here is the computer info: Model Name:Power Mac G5 Model Identifier: PowerMac7,2 Processor Name: PowerPC 970 (2.2) Processor Speed:1.6 GHz Number Of CPUs:1 L2 Cache (per CPU):512 KB Memory:2.5 GB Bus Speed: 800 MHz Boot ROM Version: 5.1.5f2
The cd/dvd drive is: PIONEER DVD-RW DVR-106D Firmware Revision: A606 Interconnect: ATAPI Burn Support: Yes (Apple Shipping Drive) Cache: 2000 KB Reads DVD: Yes CD-Write: -R, -RW DVD-Write: -R, -RW, +R, +RW Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO Media: Insert media and refresh to show available burn speeds
I'm trying to install OS X Lion from my external hard drive but when it gets to the point where you have to choose the hard drive it's going to be installed on, my MBP hard drive doesn't pop up. Only the external hard drive.
I have a Lacie Porsche 160 gb firewire drive, it worked well, I ve had it a couple of years. Now when I plug it in it won't show the disk image on the desktop. system profiler finds it and I have the Lacie upgrade tool and that checks it and says it is up to date. I have tried it on two other macbooks one older, one newer all Leopards, and one imac desktop. They all found it. so it appears to be a problem with my laptop only. I did use it with time machine but it ran out of space, Using another laptop I have deleted all lot of stuff off it and tried changing its name.
When i insert a flash drive I can find it in the sidebar on finder but would like it to show up on my desktop. Is there a setting that will allow this.
i am a tad stumped by this issue i'm having right now with my new imac. i noticed one day that none of my desktop aliases show any longer. in fact if i go to the desktop folder through finder my files and such show in there however none of my aliases nor those files show on the actual desktop. another thing i've noticed is that whenever i now try to drag and drop anything to the desktop whether it be a URL from safari or an alias i made in finder the dragged item simply just drags itself back to where i pulled it from.
Here's what happened. I bumped my Mini fairly hard, and the audio immediately cut out. I was watching some streaming video at the time, and the video kept playing. I tried to restart. Beach ball. I turned the comp off and back on. Folder with question mark. After messing around with that for a bit, I tried putting my 10.6 DVD in and starting from that. It didn't work, but that doesn't matter since that problem fixed itself after a few restarts. The problem is that the DVD is now stuck in the drive and the Mini doesn't recognize the drive any more. The drive momentarily spins up at startup, but that's it. If I have to take it apart to get the disc out, that's fine. I have the tools and have done it before when I upgraded the RAM. I just want to avoid that if possible.
My MacBook Pro is not showing my LaCie Rugged 3 Thunderbolt hard drive when connected. I can see from Disk Utility that it knows it is there, but in Finder I cannot see it.
