MacBook Pro :: White Screen With Spinning Logo When Restart System
May 16, 2012
Whenever I shutdown or restart MBP 13 with latest OS X. I see white screen with spinning sign. It is never ending. Once I have kept it like this for more then 20 hrs. I have contacted Apple couple of times but the solution was not permanent. Please check video link to better understand my issue. [URL]
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
View 2 Replies
ADVERTISEMENT
Aug 25, 2014
How do I reset or reboot a first version of MacBook Air? It crashed when I tried to restart it and now just shows white screen with Apple Logo ?Â
Info:
MacBook Air, iOS 5
View 1 Replies
View Related
Dec 13, 2009
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
View 2 Replies
View Related
Jun 22, 2012
Power just went out and now our iMac ('11) wont restart. When I power on, the start up sound plays and then a white screen with the apple and an spinning circle underneath. After 10 mins, I shut it down and tried again.
Info:
iMac
View 14 Replies
View Related
Mar 27, 2009
i had the macbook Core 2 Duo for About 8 months and it was working great.yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything!i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!!!i tried resetting the PRAM and i tried resetting the SMC twice but nothing Changed
View 1 Replies
View Related
Mar 19, 2009
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
View 3 Replies
View Related
Oct 8, 2009
I recently installed a new hard drive into my Power Mac and I installed the Mac OS X 10.4 software. After the download, the computer restarted and after it restarted, the Apple Logo appeared and some type of spinning circle (Circle made up of lines) stared to spin. I also replaced the battery inside and hit the reset button. The funny thing is, the computer was working fine yesterday. The circle has been spinning for a couple of hours now.
View 3 Replies
View Related
Jun 1, 2009
So my 20" 2.4 Imac crashed on me twice tonight. A box popped up telling me to hold down the restart button for several seconds to restat. The second time I did this it just sits with a white screen and give three loud beeps over and over. Is there a fix for this? Is it my ram? I'm at a loss.
View 1 Replies
View Related
Feb 17, 2012
I Have a MacBook pro 17" 2009 with OS 10.7 Lion, I was doing the updates in the middle of the updates give a error and say you need to restart, Now, when I restarted it is showing gray screen with apple logo and spinning gear and is not moving beyond that (even after 3 hours).I tried Resetting my mac PRAM and NVRAM, nothing, I tried Safe Mode, I tried verbose mode(command V) and is show me this,The system bootstrapper has crached: Trace/BPT trap: 5. I don't have originals cd I lose them when I move.and Lion I'm download from app store I don't Have DVDÂ I don't care about information on my mac, I backup everything daily. I just want to make it work again.
Info:
MacBook Pro, Mac OS X (10.7.3), 17" 2009
View 2 Replies
View Related
Dec 2, 2014
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!Â
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
View 1 Replies
View Related
Jun 3, 2012
MacBook mac OS will not start. Just white screen no logo. All was well until I went through aiorport security?
Info:
MacBook, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 3, 2014
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 3 Replies
View Related
Apr 6, 2012
My Mac book pro is not starting , it's just showing the white screen with apple logo
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 28, 2012
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working .
2- I tried hold Shift and option to log to safe mode , but it's not working .
3- I tried reset ram, but its not working.
I am stuck and can't do anything.
Info:
MacBook Pro
View 8 Replies
View Related
Apr 20, 2012
When I was working on my MBP last night I noticed the computer slowing down, then a sheer black wash went over the screen and a prompt saying I need to manually power off and then power on the computer with several different languages below. When I did that the computer made the on sound, opened up to the apple logo in the center and the spinning gear below. But its stuck there! I can definitely hear the laptop running but it hasnt budged for the last 12 hours.Â
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.0.x)
View 4 Replies
View Related
Feb 8, 2012
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
View 4 Replies
View Related
Feb 8, 2012
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
View 3 Replies
View Related
Aug 20, 2014
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
View 6 Replies
View Related
Mar 26, 2012
After entering my password on the login screen it went white with spinning beach ball.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 24, 2012
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
Info:
MacBook (13-inch Early 2008)
View 1 Replies
View Related
Jun 7, 2012
Holding option doesn't work, taking out the battery doesn't work, running out of ideas.
Info:
MacBook, iOS 5.1.1
View 1 Replies
View Related
Apr 17, 2010
Macbook Pro 15". Product #: Z0GG
Backstory: Sunday the updates window popped up so I let it run and reboot. Boot screen is stuck on the white screen with apple logo and spinning icon. None of the typical hotkeys were working like the Shift key to go to Safe Mode. I decided to resinstall Snow Leopard which went perfectly fine since I was able to boot off of the Install DVD. Everything seemed fine after the install and I had all of my previous programs and files.
It worked fine all day yesterday until I shut the lid to leave work. I got home, opened the lid and the spinning mouse icon was continuously spinning. I could move the mouse but couldn't click anything. I shut it down using the power button. Upon booting it up I did not hear the boot up sound but a white screen displayed and didn't do anything from there. I rebooted it again, inserted the Snow Leopard DVD to try and boot off of that and it won't even boot off of the DVD. None of the typical hotkeys work either, not even to eject the DVD. I do hear the DVD spinning up but it doesn't do anything; just a white screen.
I did reset the PRAM which forced it to reboot and I got the startup sound back but it still only shows a white screen. Any ideas? I forgot to purchase Apple Care last month before my 1 year warranty ran out so I'm 1.5 months out of that.
View 10 Replies
View Related
Apr 18, 2012
When I just got done updating my software on my MacBook pro a white screen came up like when you normally restart it. But it won't go away or let sign on...what do I do?
Info:
MacBook Pro, iOS 5.1
View 2 Replies
View Related
Jan 21, 2009
I have a Powerbook G4 with me and it doesn't boot up. I am suspecting it is hard disk/ software error that is stopping it from booting up. Here is what I see when I try to power it up: White screen, Apple logo with the round circle with rainbow color. Do you guys think that is is a software error that is stopping it from booting up? The last thing I did was to install Windows Messenger for Mac! I am thinking of trying to do a re-install using the disc that comes with my Powerbook purchase but I am at a lost of what to do. Can anyone please share with me the steps that I need to take? I've got a 'new' hard disk already, please advise on how can I rebuild my Powerbook!
View 1 Replies
View Related
Dec 15, 2009
Currently im using the Windows XP partion on my Macbook which runs fine. But the Mac OS X will not start, it will stop running at the white screen with apple logo. I have tryed to re-install it from the disc but still not luck as it still stops at the apple logo. I have run several Hardware tests and its sais that there is no problems.
View 1 Replies
View Related
May 29, 2012
My mac desktop was working this morning, locked up and then when I rebotted it it stays on the logo screen. Any suggestions on getting passed it?
Info:
iMac
View 1 Replies
View Related
May 25, 2010
I only restart about once a week or so and for about the last four to six weeks, I've been having issues restarting my 27" iMac, which is about five months old. What happens is that after I click restart and it logs out, it gets to the blue screen and the status bar in the center of the screen just keeps spinning and spinning (not the beach ball, the other one). I've let it run for 30 minutes before and it never shuts down so I have to hold down the power button and then push it again to start it up.
Problem is, I'm starting to feel the effects of that shortcut now with iTunes randomly pausing more and more times and for longer and longer amounts of time when playing a video. I'm guessing it has something to do with the processes that are normally run during a regular restart not being run since it won't perform a natural restart.
View 9 Replies
View Related
Nov 23, 2008
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
View 1 Replies
View Related
May 31, 2012
My Mac mini won't move past a white screen with apple logo in the center. What should I do?
Info:
Mac mini
View 2 Replies
View Related
Jun 27, 2012
My iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen.
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related