My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
'Ive had a MacBookPro for about a year and a half - with zero problems to report. But, yesterday, I decided to do a software update for OSX. While waiting on it, I relaized I was running late for an appointment, got impatient and did a forced shutdown (stupid move, I now know). Anyway, upon restarting it, I get the usual start-up chime, then the grey screen with the apple logo and the spinning wheel - and then it stays there. I tried putting the operating syten disc in and did a start-up - same results. Ditto for safe start. I also tried to reset the NVRAM, got the second chime, then back to the same. Is there anything you folks can suggest? Is there a way to override this and get back to normal? I hope I'm merely having hiccups related to the operating system. Or could this be a sign of the dreaded logic board failure that I fear?
Info:
MacBook Pro
i need some help regarding my iMac. I was busy installing combo update 10.5.8 on my iMac when the power in the entire house went down due to the snow. When I started my iMac back up it got stuck on the apple logo with the spinning wheel below it. I can leave it there for as long as i like nothing happens. I had the idea to reboot using the CD's i got with the iMac but there is already a disc in the discloader so i can't put the reboot CD's in. anybody know how i can get my iMac to work again? There aren't any files on the computer that i neccesarely need but if i would be able to save my photo's etc. it would be great.
I just tried to upgrade my iMac to snow leopard (10.6.3) from cd.It remains stuck on the start page since hours : white page with grey apple logo and no spinning wheel or progression bar.
Info:
iMac
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data?
Info:
iMac, Mac OS X (10.4.4)
My older MacBook loads to the apple logo and spinning wheel then shuts down. I havnet really used this laptop properly for a few years and is the 2007 Mac Book model. not been modified.
Info:
MacBook, MacBook 13" 2007 model.
i messed up with the permission for my mac(2.5 GHz, 4gb ram,macbook with leopard 10.5.6 os) and permission to EVERYONE as no access. and my macbook hung and i rebooted it after that my macbook wont get pass apple logo and the spinning wheel and restarts again and again. I dont have my installer DVD presently as i am on roaming.
View 7 Replies View Relatedi have been problems on start up it will shut down after 1 second through the apple logo and spinning wheel yet once my Mac Pro 2008 starts up fully it works fine till i shut down then it all starts over
Info:
Mac Pro, Mac OS X (10.7.2)
I recently installed a new hard drive into my Power Mac and I installed the Mac OS X 10.4 software. After the download, the computer restarted and after it restarted, the Apple Logo appeared and some type of spinning circle (Circle made up of lines) stared to spin. I also replaced the battery inside and hit the reset button. The funny thing is, the computer was working fine yesterday. The circle has been spinning for a couple of hours now.
View 3 Replies View Relatedmy 2006 macbook has not been able to start. First it didn't even have the chime, then I read through some threads in this forum and figured out that one of my RAMs was not properly put in. I fixed that, now I get the chime, the apple sign, and a spinning wheel and I am stuck there forever.
I tried:
resetting PRAM, didn't help.
start from safe boot, still stuck with apple sign and spinning wheel.
boot from installation CD by holding either the "C" or "D" key, it would not start from the CD.
Curiously, I can start it in Windows and I am using Windows right now. Some threads said that it could be a hard drive problem, but if I am using Windows, does it mean that my hard drive is fine?
I've already spent 800+ fixing the logic board in 2008 b/c of a water spill and really don't want to spend any meaningful amount of money to fix this 1000 bucks or so laptop. If any hardware is in jeopardy, I'd rather just throw it away. However, I would like to at least be able to start it in Mac OS once so that I can back up my documents.
So all of the sudden my mbp will not boot past the spinning wheel/apple screen. I have not let it try for longer than 15 minutes but I don't see the point. I tried to boot in safe mode(hold down shift) but the bar only went to about 1/3 and stopped/disappeared...so I don't know what to do. This shouldn't be happening after a couple months of light use.
Just for extra info:
I am able to boot into windows 7 via boot camp. Cannot boot from cd or go into safe mode.
The colorful spinning wheel has been stuck on the screen for 2 days now. I can move the cursor around but the wheel never goes away.....I don't know what to do
Info:
MacBook, iOS 5.0.1
I replaced my hard drive at the weekend in a mid 2010 MacBook Pro with a Samsung/Seagate 1TB 2.5 inch 5400RPM SATA II Hard Disk Drive. The install of the hardware went fine, and the computer recognised it no problem. I went through the process of formatting which again went ok, then I moved on to the restore of the old image from my time machine.
After the 4 hours or so it said restore successful and a restart was required - after the restart I am presented with the apple logo and spinning wheel and can make no progress beyond this point.
I have tried 3 restores now - all of which were 'successful' and have the same issue. I have checked the disk using the repair tool and there are no recoded issues so I'm at a loss.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have tried to login but it is stuck loading and shows the spinning rainbow wheel and hasnt moved changed in a while what do I do??
Info:
MacBook Air
I was away at a friend's yesterday and left my computer on and downloading a torrent (I have done this before and everything has been fine). When I came back today, I noticed that my computer was working very slowly so I restarted it. However, it would just stay at the grey screen with the wheel spinning forever instead of moving on to the blue screen.
I know that this has been reported many times before, even on this forum, but everything I tried does not work. I tried:
Holding down Command+S at startup and entering the command fsck -fy. Did not fix the problem
Opening the Install Disc and going into Disk Utility. I repaired the permissions and verified that the HD has no problems but the problem persisted.
Going into Safe Mode. This actually works fine, but unfortunately offers an extremely limited functionality of my computer.
I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel. I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel. What should I do next, or what am I doing wrong?
Vetaut
Info:
iMac
I have a very old IMac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago. Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel. I tried many times off-on, hold down the apple function key but none worked. I no longer have the rebooting CD with me. I wonder whether the computer can still be saved? I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files. I think it's tiger or earlier that it's using.
Info:
iMac, Mac OS X (10.4)
I rebooted my MacBook Pro (15", i7). When the system started back up, I got a status bar at the bottom of the screen. It took approx two minutes for the status bar to move to completion (almost like it was performing a BIOS update). I then got the gray spinning wheel (gray backdrop, darker gray Apple logo). I tried holding down the CMD and Option keys during a subsequent reboot....nothing changes.
Info:
MacBook Pro, Mac OS X (10.7.4)
The computer is stuck on the apple screen with the spinning wheel. I can manage to boot up in safe mode but that is it. This arose from an apple security software download recently and when the machine went to reboot it could not. Now on a normal boot up it just sits on the grey screen with the spinning wheel for hours (if let). I have booted up in safe mode and removed anything from the Accounts that was other than the iTunes helper - rebooted - nothing
I have attempted an SMC and PRAM - again on reboot - nothing. I have also started in option mode but there are only two symbols that I can use one is a circular arrow, which does nothing when clicked and the other is a right pointing arrow that appears to attempt to launch OS X, to no avail. I have also tried the option of rebooting with the install disk in the drive and holding down the C key - again nothing.
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
Info:
MacBook (13-inch Early 2008)
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
Info:
MacBook Pro, iOS 5.1
I Have a MacBook pro 17" 2009 with OS 10.7 Lion, I was doing the updates in the middle of the updates give a error and say you need to restart, Now, when I restarted it is showing gray screen with apple logo and spinning gear and is not moving beyond that (even after 3 hours).I tried Resetting my mac PRAM and NVRAM, nothing, I tried Safe Mode, I tried verbose mode(command V) and is show me this,The system bootstrapper has crached: Trace/BPT trap: 5. I don't have originals cd I lose them when I move.and Lion I'm download from app store I don't Have DVD I don't care about information on my mac, I backup everything daily. I just want to make it work again.
Info:
MacBook Pro, Mac OS X (10.7.3), 17" 2009
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
When I was working on my MBP last night I noticed the computer slowing down, then a sheer black wash went over the screen and a prompt saying I need to manually power off and then power on the computer with several different languages below. When I did that the computer made the on sound, opened up to the apple logo in the center and the spinning gear below. But its stuck there! I can definitely hear the laptop running but it hasnt budged for the last 12 hours.
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.0.x)
I have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.
My 13" macbook is stuck on the grey opening screen with the apple logo and progress circle.
Info:
MacBook
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
