I have a Powerbook G4 with me and it doesn't boot up. I am suspecting it is hard disk/ software error that is stopping it from booting up. Here is what I see when I try to power it up: White screen, Apple logo with the round circle with rainbow color. Do you guys think that is is a software error that is stopping it from booting up? The last thing I did was to install Windows Messenger for Mac! I am thinking of trying to do a re-install using the disc that comes with my Powerbook purchase but I am at a lost of what to do. Can anyone please share with me the steps that I need to take? I've got a 'new' hard disk already, please advise on how can I rebuild my Powerbook!
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
Currently im using the Windows XP partion on my Macbook which runs fine. But the Mac OS X will not start, it will stop running at the white screen with apple logo. I have tryed to re-install it from the disc but still not luck as it still stops at the apple logo. I have run several Hardware tests and its sais that there is no problems.
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working . 2- I tried hold Shift and option to log to safe mode , but it's not working . 3- I tried reset ram, but its not working.
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white. Â
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.  I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
I'm noticing some weird behavior in my Mac Pro first gen.
Basically, when I start it up, the displays just stays black for some time, until the Desktop loads up and the computer is functional, but never displays the gray screen with the Apple logo. This just happened all of a sudden and stayed like this.
I know is not a big deal now, but I'd like to sell it in the near future and this could be problematic for that.
I just bought an iMac G5 off ebay and today I tried to use the Tiger install dvd because the previous owner had deleted software like textedit, etc.
Anyway, I put the disc in and clicked on Install Mac OS X, then clicking restart. once the iMac shuts down and begins to restart, as it is on the grey screen you can hear the disc being read, then as the background goes a different shade of grey and the Apple logo appears, a minute or so passes and then the iMac begins making a lot of noise. I went away for 10 minutes, came back and it was still doing the same thing.
So I'm basically looking for help because I really want to erase and reinstall everything.
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
I just got my IMac. I have no clue what happened it was working fine. In the morning when I turned it on it just went blank turned on to a white screen with an apple on it and nothing else is happening.
I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
I have a Rev A 12 inch Powerbook - 867 mHz, 640 RAM, 40 GB hard drive. The machine's always been reliable and has performed great over the years. I bought it the last week of July, 2003.
Yesterday, the Pbook was shut down, and I press the on button so it would boot up. Almost immediately, the hard drive makes a loud, whirring noise. The computer advances to the gray screen with the Apple logo, but it doesn't get past that point and the noise continues, as if it's a car engine that just won't start...
I'm going to take it to my local Apple Store in the morning, and hopefully the data, including my nearly 22 GB of music, can be saved. Any thoughts on how to get my computer working again? By the way, it's the original hard drive installed. Hopefully this is enough info to generate some ideas, I'm stumped.
I just moved back up to Jacksonville with my friend and now his iBook G4 is not booting. It goes to the white Apple screen and spins for about twice as long as normal, and then goes to a black screen with just a type-cursor in the top left hand corner which erases any text submitted. Now, from there I went ahead and booted from the Tiger Install disk and ran permission repair and also disk repair, without any glitches. Also, we then booted again and ran a hardware diagnostic and it turned up absolutely no problems with the computer. Any ideas? Luckily, he's still under his first year of AppleCare (and he's about to purchase an extension since you can now get it in Florida legally) and he should be covered.
At work, we have a 17" G5 iMac from back before the iSight was put in. We're an Apple shop, so we have the new iMac actually on the floor for people to try out. The old G5 this thread is addressing is up on a shelf, but we want to turn it on as a display model. We plug a temporary mouse and keyboard into it, but the machine never gets past the white Apple screen with the "I'm thinking" animation. After a minute or two, the fan turns on full blast, but the white screen remains without any signs of moving on. What is our problem?
It will turn on and go to the white screen with the gray apple but even after several hours it wont do anything. I tried holding down C since my copy of leopard is stuck inside and it does the same thing.
I forgot to switch on the power socket at the wall so when I came back it had powered off. When I switched it back on it showed the last screen visible before sleep mode kicked in and then showed the apple logo with a progress bar underneath. The progress bar starts to move slowly but after about a minute starts again. It slowly starts to move again but stops after about two minutes and the macbook powers off.
Whenever I shutdown or restart MBP 13 with latest OS X. I see white screen with spinning sign. It is never ending. Once I have kept it like this for more then 20 hrs. I have contacted Apple couple of times but the solution was not permanent. Please check video link to better understand my issue. [URL]
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
Power just went out and now our iMac ('11) wont restart. When I power on, the start up sound plays and then a white screen with the apple and an spinning circle underneath. After 10 mins, I shut it down and tried again.
