Whenever I shutdown or restart MBP 13 with latest OS X. I see white screen with spinning sign. It is never ending. Once I have kept it like this for more then 20 hrs. I have contacted Apple couple of times but the solution was not permanent. Please check video link to better understand my issue. [URL]
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
Power just went out and now our iMac ('11) wont restart. When I power on, the start up sound plays and then a white screen with the apple and an spinning circle underneath. After 10 mins, I shut it down and tried again.
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working . 2- I tried hold Shift and option to log to safe mode , but it's not working . 3- I tried reset ram, but its not working.
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I have a Powerbook G4 with me and it doesn't boot up. I am suspecting it is hard disk/ software error that is stopping it from booting up. Here is what I see when I try to power it up: White screen, Apple logo with the round circle with rainbow color. Do you guys think that is is a software error that is stopping it from booting up? The last thing I did was to install Windows Messenger for Mac! I am thinking of trying to do a re-install using the disc that comes with my Powerbook purchase but I am at a lost of what to do. Can anyone please share with me the steps that I need to take? I've got a 'new' hard disk already, please advise on how can I rebuild my Powerbook!
Currently im using the Windows XP partion on my Macbook which runs fine. But the Mac OS X will not start, it will stop running at the white screen with apple logo. I have tryed to re-install it from the disc but still not luck as it still stops at the apple logo. I have run several Hardware tests and its sais that there is no problems.
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white. Â
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.  I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
So my 20" 2.4 Imac crashed on me twice tonight. A box popped up telling me to hold down the restart button for several seconds to restat. The second time I did this it just sits with a white screen and give three loud beeps over and over. Is there a fix for this? Is it my ram? I'm at a loss.
My MBP was working fine and then froze while I was on the internet. I turned it off and on again by holding down the power button. It powered on and froze on the white/gray screen with the Apple logo with the spinning wheel underneath it. I restarted it again by holding down the power button. Now it freezes on an all white/gray screen. I've tried starting it with the disk in it and holding down the "C" key and starting it and holding down the shift key after I hear the start up tone. Neither have worked.
I recently installed a new hard drive into my Power Mac and I installed the Mac OS X 10.4 software. After the download, the computer restarted and after it restarted, the Apple Logo appeared and some type of spinning circle (Circle made up of lines) stared to spin. I also replaced the battery inside and hit the reset button. The funny thing is, the computer was working fine yesterday. The circle has been spinning for a couple of hours now.
When I boot up my MacBook Pro (Unibody 17" 2011 model), it maks the CD noise, chimes the apple chime, then shows a grey/white screen. normally, this would progress to a grey screen with the apple logo on it, followed by the login screen, however in my case, the computer seems to just shut down. the fans keep running, so i know it isn't powering down completely. i can't change the volume/etc. after the computer has done this, so i'm assuming it isn't a display issue (also the display flashes white). does anybody know what this sequence of events is a symptom of? i'd really like to get my computer working again.
i had the macbook Core 2 Duo for About 8 months and it was working great.yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything!i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!!!i tried resetting the PRAM and i tried resetting the SMC twice but nothing Changed
When I just got done updating my software on my MacBook pro a white screen came up like when you normally restart it. But it won't go away or let sign on...what do I do?