Intel Mac :: Apple Logo / Wheel Goes Round And Then Empty White Screen
Jun 27, 2012My iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen.
Info:
iMac, Mac OS X (10.6.8)
My iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen.
Info:
iMac, Mac OS X (10.6.8)
My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data?
Info:
iMac, Mac OS X (10.4.4)
Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
View 1 Replies View RelatedWhy is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white.
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening. I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
Info:
iMac, Mac OS X (10.6.8)
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I just tried to upgrade my iMac to snow leopard (10.6.3) from cd.It remains stuck on the start page since hours : white page with grey apple logo and no spinning wheel or progression bar.
Info:
iMac
I have a Powerbook G4 with me and it doesn't boot up. I am suspecting it is hard disk/ software error that is stopping it from booting up. Here is what I see when I try to power it up: White screen, Apple logo with the round circle with rainbow color. Do you guys think that is is a software error that is stopping it from booting up? The last thing I did was to install Windows Messenger for Mac! I am thinking of trying to do a re-install using the disc that comes with my Powerbook purchase but I am at a lost of what to do. Can anyone please share with me the steps that I need to take? I've got a 'new' hard disk already, please advise on how can I rebuild my Powerbook!
View 1 Replies View RelatedCurrently im using the Windows XP partion on my Macbook which runs fine. But the Mac OS X will not start, it will stop running at the white screen with apple logo. I have tryed to re-install it from the disc but still not luck as it still stops at the apple logo. I have run several Hardware tests and its sais that there is no problems.
View 1 Replies View RelatedMy Mac book pro is not starting , it's just showing the white screen with apple logo
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working .
2- I tried hold Shift and option to log to safe mode , but it's not working .
3- I tried reset ram, but its not working.
I am stuck and can't do anything.
Info:
MacBook Pro
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
Info:
MacBook (13-inch Early 2008)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
View 1 Replies View RelatedMy Mac mini won't move past a white screen with apple logo in the center. What should I do?
Info:
Mac mini
How do I reset or reboot a first version of MacBook Air? It crashed when I tried to restart it and now just shows white screen with Apple Logo ?
Info:
MacBook Air, iOS 5
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
View 3 Replies View RelatedPower just went out and now our iMac ('11) wont restart. When I power on, the start up sound plays and then a white screen with the apple and an spinning circle underneath. After 10 mins, I shut it down and tried again.
Info:
iMac
i have been problems on start up it will shut down after 1 second through the apple logo and spinning wheel yet once my Mac Pro 2008 starts up fully it works fine till i shut down then it all starts over
Info:
Mac Pro, Mac OS X (10.7.2)
I recently installed a new hard drive into my Power Mac and I installed the Mac OS X 10.4 software. After the download, the computer restarted and after it restarted, the Apple Logo appeared and some type of spinning circle (Circle made up of lines) stared to spin. I also replaced the battery inside and hit the reset button. The funny thing is, the computer was working fine yesterday. The circle has been spinning for a couple of hours now.
View 3 Replies View Relatedwhen I turn on my macbook, the apple logo appeared and wheel kept turning. Macbook cannot boot. Why?
Info:
MacBook
i just get the apple logo and a turning wheel on start up.
Info:MacBookPro
My older MacBook loads to the apple logo and spinning wheel then shuts down. I havnet really used this laptop properly for a few years and is the 2007 Mac Book model. not been modified.
Info:
MacBook, MacBook 13" 2007 model.
i need some help regarding my iMac. I was busy installing combo update 10.5.8 on my iMac when the power in the entire house went down due to the snow. When I started my iMac back up it got stuck on the apple logo with the spinning wheel below it. I can leave it there for as long as i like nothing happens. I had the idea to reboot using the CD's i got with the iMac but there is already a disc in the discloader so i can't put the reboot CD's in. anybody know how i can get my iMac to work again? There aren't any files on the computer that i neccesarely need but if i would be able to save my photo's etc. it would be great.
i messed up with the permission for my mac(2.5 GHz, 4gb ram,macbook with leopard 10.5.6 os) and permission to EVERYONE as no access. and my macbook hung and i rebooted it after that my macbook wont get pass apple logo and the spinning wheel and restarts again and again. I dont have my installer DVD presently as i am on roaming.
View 7 Replies View Related'Ive had a MacBookPro for about a year and a half - with zero problems to report. But, yesterday, I decided to do a software update for OSX. While waiting on it, I relaized I was running late for an appointment, got impatient and did a forced shutdown (stupid move, I now know). Anyway, upon restarting it, I get the usual start-up chime, then the grey screen with the apple logo and the spinning wheel - and then it stays there. I tried putting the operating syten disc in and did a start-up - same results. Ditto for safe start. I also tried to reset the NVRAM, got the second chime, then back to the same. Is there anything you folks can suggest? Is there a way to override this and get back to normal? I hope I'm merely having hiccups related to the operating system. Or could this be a sign of the dreaded logic board failure that I fear?
Info:
MacBook Pro
I replaced my hard drive at the weekend in a mid 2010 MacBook Pro with a Samsung/Seagate 1TB 2.5 inch 5400RPM SATA II Hard Disk Drive. The install of the hardware went fine, and the computer recognised it no problem. I went through the process of formatting which again went ok, then I moved on to the restore of the old image from my time machine.
After the 4 hours or so it said restore successful and a restart was required - after the restart I am presented with the apple logo and spinning wheel and can make no progress beyond this point.
I have tried 3 restores now - all of which were 'successful' and have the same issue. I have checked the disk using the repair tool and there are no recoded issues so I'm at a loss.
Info:
MacBook Pro, OS X Mavericks (10.9.4)