MacBook Pro :: Superdrive Won't Recognize Blank Discs
May 12, 2012
My MacBook Pro running OSX Lion no longer recognizes blank discs: the disc does not appear on the desktop or in finder.
When I try to burn a playlist from iTunes I get the error message: "The burner is in use by another application".I am also unable to eject the disc using Disk Utility and have to reboot to get the disc out.Other media discs (software, music etc.) are read without a problem.
So I've recently been trying to burn my ubuntu.iso to a CD, but every time I insert a blank CD the superdrive holds it for a few seconds then just spits it back out. I've tried to burn it with Disk Utility and Toast 9, but it just says it's waiting for the Superdrive.
i have a late 2012 macbook pro 13.3" with latest OSX mavericks installed.I have this issue where when I insert this one blank CD RW into the superdrive, it makes a clicking sound for a while and then stops, and nothing happens(CD isn't recognised) ,CD can't be ejected either unless i restart my macbook .However when i try to insert another blank CD RW, it reads and burns just fine.
I just got a Mac Pro (2006/2007) and Installed Vista Ultimate x64 from a DVD. When I rebooted and got to the Vista desktop, it no longer lets me used the superdrive. I can eject it from Vista but when I insert a disc, all it does is spin up forever and lock up Vista.
I have reloaded Vista 3 times and get the same issue. Everything else works except the superdrive.
There's no disc in the drive, but it's locked up and won't accept a disc into the slot whatever I do. It never had trouble reading discs before--none of the spinning-without-reading issues I'm seeing other people have had. I have frequently ended up with ghost discs, when the computer hangs onto a disc image (or two) after ejecting the actual discs, but it's never caused a real problem. There is no disc image now.
She is an old lady of a 12" titanium Powerbook G4. 867 MHz, 640 MB ram, running Panther 10.3.9.
Why dont you post the explanation for certain MATSHITA DVD-R UJ-857 superdrives not being able to read: dvds/ cds/ blank dvds/ blank cds/ burned dvds/ burned cds or a combination thereof?
Apple's firmware 2.1 update released late june 2007 unwittingly fried many superdrives functionality and apple pulled the firmware update as soon as the buzz on the internet took hold, but not before many drives were randomly zapped.
Unfortunately it seems that apple doesnt publicly admit any problems on their website, in the hope that users will not notice the loss of functionality (my drive cant recognise blank/burned media, but published (pressed) dvds and cds are recognised, hence one doesn't notice there is a problem at first).
iMac, Core Duo, 17-inch, 2 GHz Boot ROM Version:IM41.0055.B08
The MATSHITA DVD-R UJ-846 can't mount disks, both CD and DVD, about 90 percent of the time. I've tried resetting the PRAM, but I don't know if it's related to this.
I have just brought back an external superdrive to my local Apple Store because it wouldn't physically swallow any disc. So I got a new one and back home ... same problem. I plugged it to my mac mini, my MacBook Pro, my 1st portable PC, my tower pc ... nothing. I made sure the second time that I didn't plug it to the same mac first (in case I had a faulty USB port which could destroy the superdrive). Plus it ejects CDs and DVDs fine if I insert one 3/4 into it. So the mechanism is working, but no matter what I do, it won't swallow any disc.
The external SuperDrive works great with my MacBook Air, but MBP does not recognize the hardware at all. Have tried all USB ports, have confirmed good connections.
When I insert a blank cd or dvd I do not get a disc image on the desktop. When I open disc utility I can see the disc in superdrive but I cannot eject it. If I insert any disc that has any kind of info on it then I have no problem.Â
i have a powermac g5 dual 1.8 tower. the dvd burner is a pioneer dvd-rw dvr-107d. according to the system profiler, this should be able to burn either - or +R discs and cds. also, the computer belonged to a friend who was using it to burn dvds up until the day she delivered it to me.
i switched out the harddrive and reinstalled everything fresh (in case that matters.)
now when i put in a blank dvd or cd (different brands, different formats) it comes up with an error message that says: This disc cannot be used because it is not recognized.
So I have a Macbook (13" 2008 model) and iMac (20" 2006 Intel Core Duo model) and just purchased Snow Leopard to upgrade the machines. Given my preference for a clean install, I would obviously need to back up my data. However, my back up external drive broke a little while back and trying to get another one (I'd need 1 TB) just isn't feasible financially at the moment.
So with the option of backing up the files to blank Blu Ray discs being a cheaper option, would that be possible? Or does Apple not supporting Blu Ray affect this? Or does it only affect official motion picture Blu Ray discs?
I am going to install a new SSD drive on my MBP mid-2009. After it is installed, can I then start up computer and then insert the DVD Install operating system disk, or do I install the DVD install disk, then shut down computer and swap the HD drive? I know that I will reformat the disk when Installer begins, but I want to know if the computer will recognize the install disk with a new blank HD in place.
Okay so last night I was trying to burn a file with Disk Utility, as soon as I put the DVD in I heard it was making a little noise (most likely because there was dirt on it - I wasn't thinking properly). When it started to burn, I could hear it make noise....I didn't want to risk not having a smooth burn so I cancelled it, then tried to eject it......to no prevail.
I've tried everything in the book.......from repeatedly pressing the eject button on the keyboard, to restarting while holding down the mouse button, to tilting it on its side and let gravity do its job, to lightly smacking the back part of it........nothing is working
When I do try and eject it, I've noticed it makes 2 different sounds....1st one is, imagine the sounds it makes when you put a CD in....and also taking it out, those 2 sounds very close to each other. 2nd one is sort of like the CD rubbing against something, like a bandsaw but on a low level. It wants to work but something is getting it caught.....
I recently moved my music to a portable hard drive. Now, my Macbook Pro does not recognize CD's or Dvd's. Does not show up on the Finder, the desk top. However, it does operate software discs and reads them.
I have a pretty old (4-5 years old?) PowerBook G4, running 10.4.11. Recently the superdrive quit playing commercial DVDs. It will recognize CDs without a problem, but when I insert a DVD, the drive makes noises like it's reading the disc for maybe 20-30 sec. and then ejects the disc. I also tried to install Photoshop, but the drive wouldn't read the instal DVD either.
Nothing appears on the desktop, and the DVD doesn't play (this is the second DVD I've tried). The drive works to download software though. These are commercial DVDs from Lovefilm in the UK - there are bound to be some scratches - does this mean I can only play new DVDs?Â
Also, if I click Finder to eject the DVD, the command is light gray, meaning the IMAC has not actually registered that there's a DVD in the drive, so I have to log off and on again for the DVD icon to appear on the desktop, at which point I can eject it. However, if I click it, it doesn't play. I'd really like to play films if I can.Â
I don't know what operating system I have, except that it's MAC OS X. I only just got it new two days ago.
My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down" and restart while holding down the mouse button.
I recently updated to iTunes 10.6.3. Since the update, I have been unable to burn CDs from any iTunes playlist. When I hit Burn, it asks me to insert a blank disc; I do; but then iTunes doesn't recognize that I have done so.Â
Strangely, I am able to burn the CD just fine in Toast Titanium, which did recognize the blank CD -- so the problem isn't with my SuperDrive. It seems as if iTunes isn't talking to the rest of the Mac.Â
I tried to burn a photo cd with the burn folder, but the blank media disc does not mount on the desktop after I insert the blank cd. The computer doesn't know there is a blank media disc in the drive and won't even eject it. I have to reboot the computer for the Imac to spit it out.
I was trying to burn a new cd and before I used the application I had inserted a blank disk which my computer didn't recognize. When I tried the application to burn the burn folder, I got a message to insert a blank disk. I tried using the Disk Utility, but when I try to select the volume Superdrive, the option is dimmed. How do I eject the blank disk from my Superdrive? I tried restarting but that did not eject it.
I came home for vacation and decided to reformat my imac g5 to get a fresh start. I backed up all my files, took out my leopard retail box, and was ready to go when I opened up the box, and noticed no disc. I have no idea where it went.I have the install discs from the computer when i got it, but it only has 10.4, so id rather not use them. I have the install discs from my macbook pro with 10.5, but I am pretty sure it will not work.So does anyone have any suggestions? Should I just go ahead and install 10.4 until and then just install 10.5 when i find it? (i really hate doing this, I hate having more than one version of an os installed)
I was thinking, for the next generation MacBook Air, would you want a slightly thicker (thickest part is 0.9in, tinnest is ~0.35in) laptop with a built in Superdrive, more ports, etc, or would you perfer that Apple moves away from this with a thinner computer (0.1in thinnest, 0.6in thickest), but with same limited ports.
I would actually perfer thicker with a superdrive, since I want an air but I want it to be like a MacBook but thinner. What do you think? Btw, this is assuming the regular MacBook does not change in size, since that would sway peoples opinions.
