MacBook Pro :: Screen Goes Black Then Cursor Looks Like It's Erasing It
Apr 21, 2012
MacBook Pro late 2011 with Lion 10.7.3
In just about any program, if I leave program running, close lid, come back in about 30 minutes, my screen will be black. I can see cursor, but when I move mouse it will "erase" some of the black screen. I've seen similar forum postings, but in those the screen is locking up -- mine does not do that. I've taken in to Genius Bar, they've run diagnostics and found no problems.
I then have to restart, but in doing so it will bring up the Guest login screen, with a completely different wallpaper than my default.
Also, there, at times, is a "hissing" sound that no one can diagnose. At first we thought it was caused by a game in which there is the sound of a waterfall, but I'm now hearing it even when the game is not being played. Super drive has been checked and no problem found.
I get a black screen with a cursor when i start up. I have tried the cmb pr fix and that gets me here, but des not solve it and the first letter of my login, enter followed by my password and enter does not work either.
I just purchased a brand new macbook air this past week. I noticed within the first day of using that if my machine went into sleep mode, and I hit a key to take it out of sleep mode, it would go to a black screen with my cursor for about 30 seconds.
It does not do it every time but enough that it is annoying. I am coming from a mid 2011 mac air that did not have any issues. (only replaced for all day battery)
Do you think this a hardware or software issue? If i swap this mac out do you think I will just encounter the same thing?
I have read numerous posts regarding waking from sleep issues but they all seem to be affecting MacBooks purchased between 2012 and 2013.
My laptop screen randomly going black during the use of computer, but the cursor is active and it moves with the track-pad. I bought this macbook pro 15"Inch laptop just 3 weeks ago. Is there any alternative for this issue?
My mid 2013 MBP, 2.8 GHz Intel Core i7 with 16Gb 1600 Mhz DDR with a 500 GB SSD running Mavericks 10.9.3 has, since upgrade to Mavericks, developed a tick. It will occasionally and erratically (some days nothing, sometimes once a day, sometimes twice or more) go black with cursor arrow visible and responsive. (Responsive=it's visible and moves as expected in response to trackpad) The screen comes back after 30-40 seconds or so, but not in response to any keypress or mouse movement that I can detect a pattern for. It just sits there, while I hit escape, spacebar, shift, cmd-option-esc, cmd-option-tab, mouse around, whatever, then comes back. System is fine, don't even get the beach ball. So it's a minor annoyance, except when I'm presenting to a roomful of people who are waiting for my machine to wake up, and that 30 seconds can be FOREVER. Which has happened twice now. When I'm connected to an external screen via thunderbolt that screen is black as well.
tried the fix of resetting SMC as well as Safe Mode boot to complete any unfinished OS updates. But the symptom is different, and those fixes haven't worked. I've never had a bad reboot, this condition just seems to pop up without apparent rhyme or reason. It's so infrequent and unpredictable that I despair how long it will take me to run bare and cycle through restoring background apps.
I accidentally connected my wife's MacBook Air to my docking station at work today. Nothing seemed to happen so I undocked it and the computer displayed a black screen and I could see and move the cursor using the trackpad. I then tried shutting down by holding the power button for 5 seconds, 10 seconds, 1 min, etc. Nothing worked and it's stuck on the black screen so I can't use Yosemite's menu to shut down or restart. When I leave the computer idle for around a minute, the cursor disappears but it will reappear after pressing keys on the keyboard.
I've noticed that when my rMBP (late 2013, Mavericks) turns off the display automatically while on battery (as configured via Energy Saver) and I try to wake it immediately, I get a black screen with the cursor, rather than my password/unlock screen. It remains a black screen, with the cursor moveable, for 5-10 seconds or so, and then the password/unlock screen will appear as usual.
This does not happen if:I don't try to wake the display/computer immediately after automatic display sleep (e.g., I wait 5-10 seconds and it's fine)I turn off the display using a hot corner and immediately wake the displayI put the computer to sleep by closing the lid and immediately wake it by opening the lidI select Sleep from the System/Apple menu and immediately wake it by pressing a key or clicking on the trackpad
Why automatic display sleep is causing this temporary black screen? I currently get around it by setting the time for automatic display sleep while on battery to 10 minutes instead of the default 3 minutes to minimize the chances of needing to immediately wake the screen. I'd like to keep it at 3 minutes if possible to maximize energy savings, but the temporary black screen is really annoying if I didn't really want display sleep and consequently have to wake immediately.
my Boot Camp install of XP—I successfully partitioned the disk in my new Mac Pro to install XP, but my problem occurs when re-booting to install XP itself. When the machine rebooted the first time to install, it stopped at a black screen with a blinking white cursor, old-school DOS style. Second time when I rebooted and held down Option, it spit out the Windows CD. When I put it back in and it appeared and I tried to select it, it spun up, looked like it was going to work, and then spit it out again, whereupon I got a DOS prompt asking me to put in a bootable volume and press any key. When I inserted the CD, it spun up, but pressing keys on the keyboard did nothing. I tried rebooting again. This time holding option yielded both the Mac HD and the Windows CD (no spitting out!). Taking this as a good sign, I selected the CD and waited. Same black screen with blinking white cursor as last time, no other response, no prompts, never progesses to an installer, pressing keys didn't help.
Has anyone else run into this problem? This is a brand new Mac Pro with the Radeon in it, I have a USB keyboard and mouse hooked up, and it has the latest firmware update.
EDIT: Seems the CD was bad. Slipstreamed SP2 into my original CD and went. Now I just need to get those ATI drivers.
My imac has a black screen with cursor after i allowed maverick updates. I tried holding shift key during start up and at first it looked like it was going to work, then it turned black again. What do i do??
My cursor (in all forms) on my macbook seems to be disappearing--it appears that every other column of pixels has gone clear as well as a clear border, leaving only a few black vertical stripes as the normal cursor. It's a black outline when it's the hand and it's a few colored stripes when it's the spinning wait cursor.
Interestingly, when you do the ctrl+zoom in a few degrees, the cursor reappears.
If anyone thinks it matters, I was in the middle of backing up via time machine when it disappeared...
My cursor (in all forms) on my macbook seems to be disappearing--it appears that every other column of pixels has gone clear as well as a clear border, leaving only a few black vertical stripes as the normal cursor. It's a black outline when it's the hand and it's a few colored stripes when it's the spinning wait cursor.
Interestingly, when you do the ctrl+zoom in a few degrees, the cursor reappears.
If anyone thinks it matters, I was in the middle of backing up via time machine when it disappeared...
I have a samsung display and I can see the cursor, but nothing i drag and drop over there is showing up. if I drag a tab over, I can see the cursor but not the page, just blackness
I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing.When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to rebootFireFox Web browser will not runI get issues with the computer running very slowly..I have already turned off the transparency option in settings.
Info: MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite
I couldn't control my cursor on the screen. It was opening files and applications randomly. My screen was suddenly empty and show "loading application…” for seconds, then the screen went back normal again. I turned off wifi, but it didn’t stop my crazy cursor. then i restarted my laptop, but i still couldn’t control my cursor.
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
I have a mid-2011 iMac (with Mavericks OS), and am doing a clean install before giving my computer to a relative. I performed a secure erase of my entire harddrive (using disk utility), reset the NVRAM / PRAM (but it only chimes once even after I tried several times), and now I get the grey screen even when I try to boot from CD, safe boot, or any other commands. I can't even get back into the disk utility.
On a side note, I have the install DVD in the DVD drive and I can't get that out.
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
had my macbook for about a year and a half and recently it just stopped working. Literally it was fine one minute and the next the screen was just black. I tried turning it on and off and now it stays at the boot screen for like 30 minutes and then just goes to a blue screen. I can move the cursor around the blue screen and stuff but there are no icons and there is no finder or anything. everytime i turn it off and back on the same thing, bootscreen and then bluescreen.
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
I have a problem with my screen - when there is something black on, I can see a faint mark of a lighter colour. I have tried to take a picture, please excuse the poor quality. There is nothing visible when the screen is off, even under close examination. Is it less visible when lighter things are on the screen, and invisible when the screen is white.
No drops or liquid spills. Will this go away on it's own? Any fixes?
I've had my mac for about three years now and everything was working fine. After I installed lion, I notice that this started to happen. I don't lose any of my information though when it does that. It just goes into a sleep mode I guess? Anyways, is this a feature from the lion update? Something standard?
My macbook pro just has a black screen with a small coloured circle on the right of the screen. It is frozen and wont respond to turning it off or on. It is plugged into mains power.
When my MacBook Pro 13" i5 goes into screen saver mode, which is black, it won't return to normal mode. Tried all keys, trac pad, closing the lip and re-opening it, and it won't respond. The only thing that works is holding down power button for hard shutdown, then restarting it. It has happened 8 times in the last 2 weeks.
After an update(I think) I can no longer get into my computer. When turned on I get the apple logo then a grey screen that turns to black but the curser is active . Then there is no more progress to the startup screen
Computer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
