i've a macbook pro late 2013 mavericks.i have tried safe boot but still same problem.i can see notifications and the cursor only ....
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2), script
I just purchased a brand new macbook air this past week. I noticed within the first day of using that if my machine went into sleep mode, and I hit a key to take it out of sleep mode, it would go to a black screen with my cursor for about 30 seconds.
It does not do it every time but enough that it is annoying. I am coming from a mid 2011 mac air that did not have any issues. (only replaced for all day battery)
Do you think this a hardware or software issue? If i swap this mac out do you think I will just encounter the same thing?
I have read numerous posts regarding waking from sleep issues but they all seem to be affecting MacBooks purchased between 2012 and 2013.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I've noticed that when my rMBP (late 2013, Mavericks) turns off the display automatically while on battery (as configured via Energy Saver) and I try to wake it immediately, I get a black screen with the cursor, rather than my password/unlock screen. It remains a black screen, with the cursor moveable, for 5-10 seconds or so, and then the password/unlock screen will appear as usual.
This does not happen if:I don't try to wake the display/computer immediately after automatic display sleep (e.g., I wait 5-10 seconds and it's fine)I turn off the display using a hot corner and immediately wake the displayI put the computer to sleep by closing the lid and immediately wake it by opening the lidI select Sleep from the System/Apple menu and immediately wake it by pressing a key or clicking on the trackpad
Why automatic display sleep is causing this temporary black screen? I currently get around it by setting the time for automatic display sleep while on battery to 10 minutes instead of the default 3 minutes to minimize the chances of needing to immediately wake the screen. I'd like to keep it at 3 minutes if possible to maximize energy savings, but the temporary black screen is really annoying if I didn't really want display sleep and consequently have to wake immediately.
MacBook Pro late 2011 with Lion 10.7.3
In just about any program, if I leave program running, close lid, come back in about 30 minutes, my screen will be black. I can see cursor, but when I move mouse it will "erase" some of the black screen. I've seen similar forum postings, but in those the screen is locking up -- mine does not do that. I've taken in to Genius Bar, they've run diagnostics and found no problems.
I then have to restart, but in doing so it will bring up the Guest login screen, with a completely different wallpaper than my default.
Also, there, at times, is a "hissing" sound that no one can diagnose. At first we thought it was caused by a game in which there is the sound of a waterfall, but I'm now hearing it even when the game is not being played. Super drive has been checked and no problem found.
I get a black screen with a cursor when i start up. I have tried the cmb pr fix and that gets me here, but des not solve it and the first letter of my login, enter followed by my password and enter does not work either.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
My laptop screen randomly going black during the use of computer, but the cursor is active and it moves with the track-pad. I bought this macbook pro 15"Inch laptop just 3 weeks ago. Is there any alternative for this issue?
View 3 Replies View RelatedMy mid 2013 MBP, 2.8 GHz Intel Core i7 with 16Gb 1600 Mhz DDR with a 500 GB SSD running Mavericks 10.9.3 has, since upgrade to Mavericks, developed a tick. It will occasionally and erratically (some days nothing, sometimes once a day, sometimes twice or more) go black with cursor arrow visible and responsive. (Responsive=it's visible and moves as expected in response to trackpad) The screen comes back after 30-40 seconds or so, but not in response to any keypress or mouse movement that I can detect a pattern for. It just sits there, while I hit escape, spacebar, shift, cmd-option-esc, cmd-option-tab, mouse around, whatever, then comes back. System is fine, don't even get the beach ball. So it's a minor annoyance, except when I'm presenting to a roomful of people who are waiting for my machine to wake up, and that 30 seconds can be FOREVER. Which has happened twice now. When I'm connected to an external screen via thunderbolt that screen is black as well.
tried the fix of resetting SMC as well as Safe Mode boot to complete any unfinished OS updates. But the symptom is different, and those fixes haven't worked. I've never had a bad reboot, this condition just seems to pop up without apparent rhyme or reason. It's so infrequent and unpredictable that I despair how long it will take me to run bare and cycle through restoring background apps.
I accidentally connected my wife's MacBook Air to my docking station at work today. Nothing seemed to happen so I undocked it and the computer displayed a black screen and I could see and move the cursor using the trackpad. I then tried shutting down by holding the power button for 5 seconds, 10 seconds, 1 min, etc. Nothing worked and it's stuck on the black screen so I can't use Yosemite's menu to shut down or restart. When I leave the computer idle for around a minute, the cursor disappears but it will reappear after pressing keys on the keyboard.
Info:
MacBook Air, OS X Yosemite (10.10.1)
my Boot Camp install of XP—I successfully partitioned the disk in my new Mac Pro to install XP, but my problem occurs when re-booting to install XP itself. When the machine rebooted the first time to install, it stopped at a black screen with a blinking white cursor, old-school DOS style. Second time when I rebooted and held down Option, it spit out the Windows CD. When I put it back in and it appeared and I tried to select it, it spun up, looked like it was going to work, and then spit it out again, whereupon I got a DOS prompt asking me to put in a bootable volume and press any key. When I inserted the CD, it spun up, but pressing keys on the keyboard did nothing. I tried rebooting again. This time holding option yielded both the Mac HD and the Windows CD (no spitting out!). Taking this as a good sign, I selected the CD and waited. Same black screen with blinking white cursor as last time, no other response, no prompts, never progesses to an installer, pressing keys didn't help.
Has anyone else run into this problem? This is a brand new Mac Pro with the Radeon in it, I have a USB keyboard and mouse hooked up, and it has the latest firmware update.
EDIT: Seems the CD was bad. Slipstreamed SP2 into my original CD and went. Now I just need to get those ATI drivers.
My imac has a black screen with cursor after i allowed maverick updates. I tried holding shift key during start up and at first it looked like it was going to work, then it turned black again. What do i do??
Info:
iMac (21.5-inch, Late 2013), iOS 7.0.1
When resuming from sleep, the login screen is black. When I move the mouse, areas of the screen that the cursor hovers over will clear.
Info:
MacBook Pro, Mac OS X (10.7.3)
since last night (monday) i have opened my mac book pro up for sleeping because i never shut my computer off....well last night i opened my computer up, typed in my password and then all of a sudden my screen went black....i called apple support and got it fixed but then again it happened again to me this morning? why is this?
View 1 Replies View RelatedMy macbook pro is only a month old, and I've done nothing to it besides write documents and use facebook. Every time I close the lid so the computer can "sleep" it does, but when I open the lid back up, it refuses to wake up. My friend has the same computer and automatically her screen lights up when she opens the lid from sleep. My screen will stay black up to 10 minutes sometimes. Why is this happening? Should I bring it in to Apple? Also, when I shut my computer down, starting it up is another hassel in itself. The screen goes white like it's suppose to, but only for a split second. The apple in the center never shows up, and the screen just goes black. It's very aggravating and I feel like I'm the one with the only messed up mac.
Info:MacBookPro, Mac OS X (10.7.3)
I've got pretty old MB that was bought back in 2007, and it's been working ok up until today. All of a sudden I can not boot it, the screen stays black. Whenever I turn it on the screen flashs for ~100ms and then remains black, at the same time the sleep mode light is on and off not gredually fading in and out like when it is in sleep mode but sharply. Safe boot didn't help, PRAM reset didn't help, booting into the firmware (CMD-OPT-O-F) didn't work as the screen stays black. . I can hear hard drive working but other then that I see no signs of life (even caps lock and num lock keys don't get highlighted when I press them)
Info:
MacBook, Mac OS X (10.6)
when my macbook pro go to sleep mode and after i try to started it - I got black screen and have a loading cursor mode, If I close my macbook and after 3 minutes open - all working fine!
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
My MacBook Pro 15 inch mid 2010 model i7 processor is having problems when I close the lid and the computer goes to sleep. Heres how my problem is occouring. I close my macbook pro lid. After waiting about 10 min (my macbook sleep time) I lift the lid. Once I do this i see the screen.... for about 2 seconds and it suddenly goes black. I fix it by turning my brightness down 1 bar then turning it back up 1 bar. I dont remeber this happening on snow leopard it seems to be a lion issue and a lot of other users are having it.
Info:
MacBook Pro, Mac OS X (10.7.4), 15 Inch i7 processor Mid 2010 model
When I open MacBook Pro (in sleep mode) I see rainbow on black screen. I have to keep the power button. I have this problem only when I open (after closing) my MBP. It started after an upgrade HHD to SSD (OCZ Agility 4). SMC reset did not help. I have MBP 13 late 2011 i5 2,4. Mac OS X 10.7.4.
Info:
MacBook Pro, Mac OS X (10.7.4)
my macbook air 13 display only black screen and pointer when wake up from sleep. its not frequently happen. to become normal it take 10-15 sec, is it hardware problem or software problem?
Info:
MacBook Air, OS X Mavericks (10.9.4)
I have a 2 month old 13" MBP which I absolutely love. The only hitch is that there is an oddity when connected to my Dell 2008wfp display. It only happens when I wake the MBP from sleep. A number of things happen sometimes. Usuaully, when I wake the MBP from sleep, i get a black screen on both displays and all I can see and control is the cursor. Sometimes the main display will be black, but the MBP display will show the desktop wallpaper, but again, I can only see and control the mouse cursor. It should also be worth mentioning that the keyboard is rendered non-functional as well.
Sometimes, OS X will appear on both displays, with mouse cursor active, keyboard inactive, but I am unable to click anything or interact with anything OS X.
Anyway, I'm at the point where I need to mention this because it happens quite frequently and its getting rather annoying. The only way I can get out of this hang, is to cold reboot the machine. It happens everyday and at least 50% of the time I wake the MBP from sleep. When not connected to the display, I never get this occurrence. Also, this display worked perfectly when I used to own the classic 15" MBP, so its hard for me to pinpoint what exactly is the anomaly that is happening.
Anyone else experiencing this same issue? I am using a mini display port to DVI adapter to the Dell display.
When I wake from a long sleep, my screen comes on but everything is black. If I move my mouse around, the tiles behind the pointer switch over to whatever app is open. When I invoke expose/spaces, the screen fixes itself and displays everything.
View 1 Replies View RelatedI've been experiencing a black screen with a frozen cursor (everything is basically frozen) after waking up from sleep in Windows Vista. The Mac side of things are fine, and its super annoying, because I have to do a hard reboot each time this happens. I tried google, but it appears that everyone that has a problem similar to this has a responsive computer or just needed a different driver for their graphics card. I've tried installing a different X1600 driver for this, but it didn't work. I'm on a MBP1,1 running Windows Vista SP2 (fully upgraded) with Bootcamp 3.1.
View 6 Replies View RelatedFor the past few weeks it has been going to a black screen when trying to wake it up from sleep. Either I've put it through too much work lately editing all these photos and its really tired. So, often it wakes up normally and functions fine, well, not really. It is seemingly very slow. It requires a lot of time (more than before) to open up a program or it gives me the "spinning wheel of death" when trying to go to a different page on the internet or open up a folder on my desktop. Amongst other things that require it to think. So It's just a lot slower in general than before.
View 3 Replies View RelatedIn the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours.
Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop appears (after logging in). This did not occur until I got 10.7.3 and only within the last 2 months.
Info:
MacMini 2011 i5, 8GB, Radeon 6630M , Mac OS X (10.7), iPhone4; headless dual G5 via FW800
when working on my new Imac sometimes the machine put itself in sleep mode! The screen turns black and I have to enter my password. Sometimes it happens 2 times in 1 minute; other times once in 1 hour.
View 3 Replies View RelatedI'm using an iMac (late 2011) with 10.7.3. I'm doing things on the computer or some process is going on when the screen instantly goes black (no dimming first). If a video was playing, I can still hear it playing, but pushing keys on the keyboard or mouse or pad does nothing to wake the screen. Sometimes pushing the power button a number of times will get the screen to come on, sometimes it won't. When the screen goes black, if an external drive was running and then stops, I can sometimes get the screen to come to live. Sometimes this black screen happens when I'm burning a DVD; when the DVD is finished, I can bring the screen to life. I thought one of my two external drives was bad, so I disconnected it. That seemed to help (though verifying the disk revealed no problems). But a few minutes ago, the screen instantly went black again; no dimming first. There have been times I thought this was associated with a new bit of software, but then it returns even after I delete the suspect software. Sometimes I have to use the power button to shut down the iMac then restart it. Once, I had to unplug and replug the iMac before I could get the computer to respond and the screen to return to life. I don't know if this is a hardware problem (internal or external), a software problem, or some combination...or something I haven't thought of, at all.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I have an early 2008, 24-inch iMac. This problem started after I installed an OS X Mavericks update (and has continued). Basically, after the screen is asleep for a while, if you come back and move the mouse / tap the keyboard, the desktop never reappears. The screen stays black but the mouse cursor shows up and you can drag it around. I've seen some similar issues that said they could get the app switcher, but that never happens for me. Just mouse cursor and black screen, no matter how long you try to wait it out or tap buttons. The only solution is a cold restart, although I think in the past I was able to fix by turning off energy saver settings for putting the display to sleep. It doesn't happen every time, I'd say it happens over 50% of the time. The problem actually kicked in with one particular App Store update of Mavericks. I believe it was 10.9.3 if I recall correctly.
View 1 Replies View RelatedOnly way to recover is hard restart. Just downloaded Lion two weeks ago - problem started shortly after.
Info:
MacBook Pro, Mac OS X (10.7.3)
My cursor (in all forms) on my macbook seems to be disappearing--it appears that every other column of pixels has gone clear as well as a clear border, leaving only a few black vertical stripes as the normal cursor. It's a black outline when it's the hand and it's a few colored stripes when it's the spinning wait cursor.
Interestingly, when you do the ctrl+zoom in a few degrees, the cursor reappears.
If anyone thinks it matters, I was in the middle of backing up via time machine when it disappeared...
My cursor (in all forms) on my macbook seems to be disappearing--it appears that every other column of pixels has gone clear as well as a clear border, leaving only a few black vertical stripes as the normal cursor. It's a black outline when it's the hand and it's a few colored stripes when it's the spinning wait cursor.
Interestingly, when you do the ctrl+zoom in a few degrees, the cursor reappears.
If anyone thinks it matters, I was in the middle of backing up via time machine when it disappeared...
Any suggestions are appreciated.
I have a samsung display and I can see the cursor, but nothing i drag and drop over there is showing up. if I drag a tab over, I can see the cursor but not the page, just blackness
Info:
iMac, OS X Mountain Lion (10.8)
