Gonna turn in my MBP later this week, because of a broken hard drive. What do I do before turning it in? Should I clone the drive (for backup) and then format and zero it out, to remove personal information?
View 5 RepliesI bought the new 13" MBP and I'm selling my Late 2007 15" MBP to cover the cost. I will be formatting the hard drive so that my account and info on the computer are erased. My question is, how can I erase my account on the system so that whenever the new owner gets it, he/she gets the Leopard start up screen (The one like when you purchase a new Mac and you have to setup your account i.e. the "welcome" screen)?
View 8 Replies View RelatedI recently purchased a MacBook Pro. I previously owned a MacBook and have a bunch of personal info and preferences on it. I used migration assistant about a month ago. It worked pretty well but some of my apps weren't there or weren't functioning well. My new MBP seems like it is unorganized. I want to erase my HDD (just install OSX again, right?) and start fresh. Is there another way to transfer my info over to my new MBP? Maybe pick and choose EXACTLY what I want transfered... I don't think migration assistant gave me an option to select individual apps.
View 3 Replies View RelatedWhen I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
View 8 Replies View RelatedI had some problems with my 17" MacBook Pro and needed a replacement immediately. The Apple Store didn't have a 17" that met my requirements so I bought a 13" that I plan to give to my wife to replace her 13" non-pro.
So. I'm ordering a 17" over the Internet. When it arrives, I'd love to avoid ALL the configuration that I just went through to get this new 13" setup like my old 17". Is there any way to completely clone the drive in my 13" MBP completely and transfer the data to the new 17" MBP when it arrives?
I just purchased a MacBook Pro running the latest Leopard OS. I hooked up a Lacie external HD using FW 800 to backup a bootable system of my complete HD. I used Intego Personal Backup. All seemed to go well and the backup showed up on my startup screen in Preferences. Problem is it will not boot my sytem up. Tried twice and cleared my Lacie prior to backup. The Lacie also showed up as a startup disc when I did an Option startup. Never had such a problem with Tiger but I always used FW which the MacBook does not have. I am now trying Carbon Copy Cloner to make a backup but it is not complete. Does the MacBook using Leopard have any special requirements for a backup such as a particular cable cable to use?
View 2 Replies View RelatedI recently bought a Macbook Pro with a 200gb hard drive. Right now I am running bootcamp dual-booting OSX 10.6.5 and Windows7 100gb partitions each. I just got done configuring everything and then my friend offered me a 500gb hard drive for $50 so of course I had to buy it.
I am wondering if it is possible for me to clone the hard drive I currently have to the new 500gb hard drive and then extend the partition sizes so I don't have to go through and reinstall everything on the Windows side again.
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
I have a Macbook (about a year and a half old) with 250 G hard drive which is partitioned in half. One half has Mac Os (leopard) and the other bootcamp partition is Windoze xp. I use both equally. I am planning to get a 500-750 G 2.5 inch hard drive and clone my entire hard drive to it so I will have more room (and also a good backup if the need ever arises). Since my drive has BOTH the Mac os and the bootcamp partiton with windoze on it, I need to clone them both over to the new drive. I believe superduper just clones the OS portion and I really don't want to re-install the windows stuff unless i have to! I read that winclone can clone the windoze partitian. SO THIS IS MY PLAN. I AM NOT SURE IF THIS WILL WORK. Is this right? Did I leave anything out? Is there a better way?
1. Get new larger drive and put in a separate powered enclosure
2. Connect to my macbook with usb connector
3. Use superduper to clone the Mac Os to the new drive.
4. Use Winclone to clone the bootcamp (windoze) partition to the new drive
5. Replace the old smaller drive with the new drive.
I think this would work, but am not sure how or when i have to partition the new drive to work with winclone. or does winclone do this automatically?
Can I make a disk image of my current MB Pro (early 2008) and copy it to my new i7 MB Pro to retain all my docs and programs?
I've been having problems booting into my OSX partition. At the time it started I wasn't using my Macbook Pro (Late 2009) very often so whenever I needed I just booted up into my BOOTCAMP partition. Anyways, I decided to finally stop being lazy and do a clean install. There's nothing on either partition of the same hard drive that I want. I put together a bootable USB drive and boot from it. From here I go to the Disk Utility and try to erase the entire drive. It gives me this error: URL....
Now, that's not a screenshot from my mac but its the exact same error. Anyways, I've tried to find something on point but I just can't. Some posts have stated that the hard drive is broken, but if that's the case why can I start up the BOOTCAMP partition of the exact same drive flawlessly? I can even manipulate files on the OSX partition from Windows 7.
Info:
MacBook Pro, OS X Mountain Lion (10.8.1)
I'm going to be swapping the 250 GB drive in my 2008 MBP Penryn (17) for a Seagate Momentus 500/7200rpm drive. There are two ways to go. One is to put the new drive in an enclosure and use SuperDuper or CCC to clone the main HD and then swap them. The other is to use Time Machine. That means installing the new drive blank, boot from the OS disk and format. Then go to the most recent TM state and restore. My available external HD is the FW800 Western Digital Studio. It has space for a partition big enough for the cloning. The case coming with the Seagate is the Other World Express USB2. I have good pdfs on the install procedure. Need to remember to print them, first.
View 8 Replies View RelatedI want to find the best way for a new college student to back up her MacBook Air files. Can she use cloning software and an external hard drive? I'm unclear if the Air supports attaching an external hard drive.
View 7 Replies View RelatedI have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.
My current hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I just cloned my hard drive to a new and bigger drive. I did the OSX 10.5.8 update on the old western digital drive as a safety precaution, so that if it screwed up I would still have a good copy on my new Seagate barracuda. The update looks to have gone well and I will be waiting for a couple of trial days before backing the drive up again. My question is, when I clone the drive again(to the new seagate) how will that work? Should I erase the existing disk image(10.5.7) on that drive or will it overwrite the existing image with the new 10.5.8 one? This is the first time I have used carbon copy and don't really know all the in's and out's of it.
View 1 Replies View RelatedIs there anyway to erase my hard drive on my old broken mbp? (fried logic board) I want to sell the whole unit, but feel that the only thing i could do is take out the hard drive and sell everything else. Id prefer to not have to dismantle my mbp as it is somewhat time consuming. Is there a way to erase it within the mac?
View 2 Replies View RelatedInstalled m4 crucial SSD and I cannot erase and format new drive. I get an error "wiping volume data to prevent future accidental probing failed."
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
How do I erase my hard drive? In Utility>Disk Utility, but the only option highlighted is "Erase Free Space".
Info:
MacBook (13-inch Mid 2007), Mac OS X (10.5.8)
I have a Macbook running on snow leopard and I wanna upgrade my internal hard drive as it is currently too small. I downloaded Carbon Copy Cloner and cloned my entire hard drive to an EXTERNAL HARD DRIVE. Now, I have that new internal hard drive from wester digital. What do I do with it? replace the current internal hard drive with the new harddrive and then how do I get the data from the external hard drive with my cloned data to the fresh western digital? Do I boot first from external hard drive etc? I am not sure what to do now?when I was given the option which hard drive to clone (or which part of the hard drive to clone) there was also the option to clone "Install Disk". I don't need to clone that, right?
View 3 Replies View RelatedIs there any reason to erase hard drive and do a new install other than selling mac or new os?
View 3 Replies View RelatedMacbook OS X 10.5.8 and a WD 10EAVS 1TB External Hard Drive. That's all. I was given this by a fellow student on campus who was graduating. So I want to use this to store my iTunes Library (my Macbook's hard drive ran out of space). Here's what I do:
- Macbook is turned on and running
- I plug the external hard drive into a working outlet --> Hard drive turns on
- I plug the external hard drive into the mac using a USB connection --> Disk Insertion Error message: the disk you insterted was not readable by this computer
- It is not readable so I open it in Disk Utility (the hard drive is listed/recognized)
- I attempt to erase and/or partition the hard drive in order to format it in Mac OS Extended OR Mac OS Extended (Journaled), but I get one of these two messages: "Disk Erase failed with the error: File system formatter failed." OR "Disk Erase failed with the error: The underlying task reported failure on exit."
I attempted to look up what these mean or how to fix the problem but nothing is really working. I was able to format the hardware line to MS-DOS (FAT) and the sub-line as Mac OS Extended (Journaled) but I don't even know if that's right or not.Basically, I need my computer to recognize this hard drive whenever I plug it in and to run smoothly as "extra space" to store my music on.I haven't had A LOT of experience with external hard drives but enough to get things done. But this problem is a killer.
Info:
mac book, Mac OS X (10.5.6)
i hear its possible to make a install emergency disk using a flash drive, i purchased a HP USB 16GB flashdrive v 165w, [URL]
i formated the drive as a Guid Partition, ignored preferences and all the stuff i could find online to see to it that i did it right but no go,
can anyone tell me if this drive is incompatible or which one i should exchange it for?
i tried cloning my original OSX Leopard DVD and i get errors when from both CCC and Super Duper,
I'm planning to replace my boot hard drive with a pair of RAID0ed SSDs. In order to familiarize myself with certain techniques I have build a software RAID0 from two 160 GB Maxtor SATA I hard disks. That went pretty much without problems. The two HDs are now sitting in position 1 and 2 in my Mac Pro.
The problem arises when I try to clone my boot drive onto the new RAID 0 drive. I was using disk utility and got an error message. Then I thought my fault was using disk utility from the HD which I wanted to clone and booted from the Leopard install disk. I then used disdk utility from that source to clone the HD boot drive to the RAID. Again I got the error.
What is going wrong? Do I have to approach this completely different?
I use carbon copy clone for my mac to copy boot drives, what do I use for the windows boot drives/partions to move to a different drive?
I've got Mac OSX on one drive and Windows 7 on another and will be installing a 160gb SSD drive for boot drive this weekend. I just want to copy the windows boot drive to the SSD drive partion I've created for windows.
trying to help my mat out with his laptop. Disk is small and full. Sadly I used to using Linux and Windows and not Mac Os. I have mounted the new drive in a caddy and conncted it. Now jsut need to kow a good way to copy the entire thing to the new drive and make it bootable.
IF it was Linux I would jsut dump the file system and in windows I would use symnatec but I have been told this isn't good for Mac's.
I have a G4 400 Mac desktop running plotter software that I need to put on a new drive in the same machine. The current drive is making clicking sounds at start up that probably indicate poor drive health. How do I clone the current drive to a new drive in a way that will allow me to just switch start up to the new healthy drive and keep running the plotter software as usual?
View 3 Replies View RelatedMy Macbook battery died and when Mac replaces it, the hard drive will be wiped out. Does anyone know where to go and how much it costs to save what's on my hard drive?
View 14 Replies View Relatedive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?
View 1 Replies View RelatedI just received my new MacBook Pro. It came with 250 gb of hd space. I had to do an erase and install on it because of an issue that came up while using the migrant assistant. So, after doing the erase/install it says that I only have 216 gb of space left? And thats without the applications CD that I have to put in which will be about 4 gb. I believe when I first turned the computer on before doing the erase/install it had about 235?
View 9 Replies View RelatedI have the Seagate Momentus XT and I have a quick question. If I reformat the Hard Drive portion does that erase the SSD side as well? If not how do I erase the SSD side of it.
View 1 Replies View Related