I'm planning to replace my boot hard drive with a pair of RAID0ed SSDs. In order to familiarize myself with certain techniques I have build a software RAID0 from two 160 GB Maxtor SATA I hard disks. That went pretty much without problems. The two HDs are now sitting in position 1 and 2 in my Mac Pro.
The problem arises when I try to clone my boot drive onto the new RAID 0 drive. I was using disk utility and got an error message. Then I thought my fault was using disk utility from the HD which I wanted to clone and booted from the Leopard install disk. I then used disdk utility from that source to clone the HD boot drive to the RAID. Again I got the error.
What is going wrong? Do I have to approach this completely different?
I want to reformat and install SL fresh and am getting an error when i use Disk Utility (booting from SL DVD) to delete the RAID0 config. The error is "invalid request".
When I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
I use carbon copy clone for my mac to copy boot drives, what do I use for the windows boot drives/partions to move to a different drive?
I've got Mac OSX on one drive and Windows 7 on another and will be installing a 160gb SSD drive for boot drive this weekend. I just want to copy the windows boot drive to the SSD drive partion I've created for windows.
I recently bought a Macbook Pro with a 200gb hard drive. Right now I am running bootcamp dual-booting OSX 10.6.5 and Windows7 100gb partitions each. I just got done configuring everything and then my friend offered me a 500gb hard drive for $50 so of course I had to buy it.
I am wondering if it is possible for me to clone the hard drive I currently have to the new 500gb hard drive and then extend the partition sizes so I don't have to go through and reinstall everything on the Windows side again.
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
Getting OCZ SSD to install on MacPro 08 in second optical bay. Must have User files on separate drive due to SSD will barely hold system. I figured I'd have to clone my primary boot drive to spare partition, boot from clone, setup it up with User in other location from SysPrefs > Users > control click current user > advanced options, restart then dump items form User in order to have the drive sized for the SSD. Once the intermmediate tranfer drive was set up, clone it to the SSD and use as boot.
I tested clone before actuall data transfers. Problem is after switching User file location from the booted clone, restarting, but re-booting looks like clean install. No preferences showed up, missing all but stock apps in dock, desktop image back to clean install, printer needing registration.Tried advanced options again to locate User on same original boot drive, restart, same thing. I did not remove User files yet from the cloned drive which I was booting. Just switched location.
Info: Mac Pro, Mac OS X (10.7.2), MacPro '08, 2.8 Octo, 12GB, 5TB
I have a Mac Pro 2008. I just got my second Crucial 256 gig SSD. Wanna make it a Raid 0 with my first one. Here are my thoughts.
Process 1:
1. Use disk utility to restore image of original Crucial 256 SSD to external USB drive 2. Boot up with SL DVD 3. Build Raid 0 using two drives. (do I need to 0 out?) 4. Restore image to Raid 0 5. Boot
Process 2:
1. Boot off DVD 2. Create Raid0 3. Use SL to restore backup from time Machine to Raid 0 4. Boot
As we discussed in other threads it could be particularly advantageous to use SSD RAID0 arrays for dual or even multiple booting. With a decent amount of striped SSDs the idea is to run all your operating systems and applications with high speed. At least that is the theory. To test the idea I have decided to use two Maxtor 160 GB HDD in a very basic dual RAID0 array configuration for booting OS X and Vista-64 in AHCI mode.
Here we go:
First thing I learned is that you have to partition the HDDs prior to building your array.
Second thing I learned is that you have to keep it all in HFS+ to make it work.
So now I have used disk utility to create two equal size partitions in HFS+ with GPT on both HDDs.
Next I fused the two lower partions together for a first RAID0 array named 2R-Leo. Format is still set to HFS+ and RAID0 mode is selected.
Then I fused the two upper partitions together for a second RAID0 array named 2R-Vista. Here format is also set to HFS+ and RAID0 mode is selected.
With that done I exited the disk utility to get a fresh start on it. I then entered disk utility again.
I'm a graphics professional taking the plunge into a Mac Pro. After some research, this is my notional drive setup:??GB SSD Boot Drive in the optical bay2 x 1TB 7200rpm SATA in RAID0, partitioned for 1.Data and 2.Scratch (therefore <2TB data)I obviously need to make sure that RAID0 is safely backed up. I've got an online backup service in case my house burns down and I'll be backing up individual projects onto optical media, but I will of course want to Time Machine the Data partition of the RAID.Now, for that Time machine drive I can either create another RAID0 from the same kind of drives (with the risk that entails), or for about the same money get a 2TB 5400rpm (leaving a drive bay free for future use, possibly another backup).
I'm having a hard time deciding what to do with my two open HDD bays in my Mac Pro.I know I want to add more storage, but I'm not sure if I should use Raid0 or not.I store most of my media on a server but wanted to store the following in my MacPro and would need more hdd space.Bootcamp - obviously can't store in serverScratch drive - would write handbrake encodes to this then transfer to serverIn all I'll need around 1.5tbI already have a 1.5tb drive and would only consider buying another to put them into raid0. Should I bother with raid0 for the increased speed or just use the 7200RPM 1.5tb drive I already have?
I have successfully striped two SSDs in Vista Business-64 on my MacPro1,1. I have used Vista's data carrier administration program for this. As expected the array isn't recognized in OS X. So I cannot just dump a Winclone image on the array. That would have been much to nice!
My next strategy was a total backup with Vista's own backup program on another HDD. That went without a hitch. I then hoped that booting the Vista install DVD with the backup drive present and the RAID0 array would allow me to restore the backup on the RAID array. Unfortunately Vista will not recognize the array running of the install DVD. Loading AHCI or IMSM drivers will not change this situation.
It appears that you have to make the dynamic data carrier active if you want to install Vista on it. Unfortunately the data carrier admin program will not let me do this. I would do it in DISKPART if I knew it was possible and how to do it.
So the question is does anybody know how to install Vista Business to a dynamic data carrier? If I cannot figure out this soft RAID0 I will ave to buy a RAID controller which I thought I might avoid at this point.
Got a Powerbook G4 with a "messed up" HD. Couldn't fix it, so got a firewire drive and ran a bunch of utilities from my newer intel iMac. Cloned the Powerbook's drive to a USB hard drive, did all repairs on the USB drive, formatted the Powerbook, cloned the USB drive BACK to the Powerbook, but it just gives me the flashing question mark when I try to boot.
What is REALLY weird is I can boot my iMac FROM THE CLONE ON THE USB DRIVE and it works fine.In Drive Genius the Powerbook drive (in TDM) shows as a single drive, but if I go to "Repartition" then it shows 3 smaller partitions on the drive; I believe they're called "Apple Free Space" or something like that (can't check right now, I'm running Repair on it AGAIN at the moment).
I feel like I'm missing something simple, like the machine just doesn't see one thing that tells it "Oh, yeah! There's an operating system on this drive!" I have tried partitioning from Drive Genius and Disk Utility. Have done clones back and forth with Drive Genius, Disk Utility, and Carbon Copy Cloner. Same results each time.
i don't have a backup of my macbook - 10.5.8am also in process of reassembling my old iMac G5 ALS - 10.5.8 also.Appreciate that from a boot disk perspective then the intel is a guid format and ppc is on apm.Is there anyway to have a single external disc to backup both.
ideally i'd just plug it into the firewire port and use carbon copy cloner on a regular basis.
I want to clone my old pc's hard drive so I can boot it up on my iMac via Boot Camp and it will be identical to my PC - is this possible?How would I go about creating a disk image of my PC hard drive and then loading it up in bootcamp?Bootcamp will provide all the drivers I need but what about the old drivers installed for the PC hardware?
My internal HD failed. I have a recent Super Duper bootable Clone connected with FW800. The option key at startup doesn't allow me to access the clone drive. I press the start key, wait for the "bong," hold down the option key and nothing happens - just whiring, some crunchy sounds and a solid blue screen. I was able to reset the PRAM using the command-opt-P-R keys and got the 2nd "bong", but that hasn't helped the problem. It's a 2008-9? MBP running 10.6.? I've order a replacement internal drive. I was hoping to be able to boot to the clone and work in the meantime.
I just cloned my hard drive to a new and bigger drive. I did the OSX 10.5.8 update on the old western digital drive as a safety precaution, so that if it screwed up I would still have a good copy on my new Seagate barracuda. The update looks to have gone well and I will be waiting for a couple of trial days before backing the drive up again. My question is, when I clone the drive again(to the new seagate) how will that work? Should I erase the existing disk image(10.5.7) on that drive or will it overwrite the existing image with the new 10.5.8 one? This is the first time I have used carbon copy and don't really know all the in's and out's of it.
I have a Macbook running on snow leopard and I wanna upgrade my internal hard drive as it is currently too small. I downloaded Carbon Copy Cloner and cloned my entire hard drive to an EXTERNAL HARD DRIVE. Now, I have that new internal hard drive from wester digital. What do I do with it? replace the current internal hard drive with the new harddrive and then how do I get the data from the external hard drive with my cloned data to the fresh western digital? Do I boot first from external hard drive etc? I am not sure what to do now?when I was given the option which hard drive to clone (or which part of the hard drive to clone) there was also the option to clone "Install Disk". I don't need to clone that, right?
I had some problems with my 17" MacBook Pro and needed a replacement immediately. The Apple Store didn't have a 17" that met my requirements so I bought a 13" that I plan to give to my wife to replace her 13" non-pro.
So. I'm ordering a 17" over the Internet. When it arrives, I'd love to avoid ALL the configuration that I just went through to get this new 13" setup like my old 17". Is there any way to completely clone the drive in my 13" MBP completely and transfer the data to the new 17" MBP when it arrives?
trying to help my mat out with his laptop. Disk is small and full. Sadly I used to using Linux and Windows and not Mac Os. I have mounted the new drive in a caddy and conncted it. Now jsut need to kow a good way to copy the entire thing to the new drive and make it bootable.
IF it was Linux I would jsut dump the file system and in windows I would use symnatec but I have been told this isn't good for Mac's.
I have a G4 400 Mac desktop running plotter software that I need to put on a new drive in the same machine. The current drive is making clicking sounds at start up that probably indicate poor drive health. How do I clone the current drive to a new drive in a way that will allow me to just switch start up to the new healthy drive and keep running the plotter software as usual?
I'm thinking of upgrading my HDD on my new Mac Mini(2.0 GHz Core 2 Duo) and I'm wondering if this is possible. I would like to clone the old to the new without having to buy a USB or Firewire to SATA adapter. Would it be possible to disconnect the Super Drive(CD/DVD) and connect up the new drive, use Super Duper to clone, then replace the old with the new and reconnect the Super Drive?
I've searched the forums to see if anyone has tried this but I didn't find anything. I'm not even sure if there is a second SATA port that would work for a HDD. I know the Super Drive is a SATA because it's listed when I look at system info.
I've seen a lot of folks using USB or Firewire to do this so that's my backup plan but it would seem if I can get both drives connected this would be pretty straight forward.
I'm about to partition my WD passport into two section . It's 120 gigs and I'm going to use 100 gigs to back up all by media on my mac (pictures music video) and then I'd like to have a 20 gig section for extra flexible storage/transporting files from computer to computer, including PCs. So carbon copy cloner says the drive has to be formatted to HFS+ but in disc utility I don't see HFS+ under partition/format. also for the smaller partition what would be the best format for what I described above?
Gonna turn in my MBP later this week, because of a broken hard drive. What do I do before turning it in? Should I clone the drive (for backup) and then format and zero it out, to remove personal information?
I have XP on a 1 TB HDD (only about 80 GB is used) and I want to move it to a 120 GB partition on an SSD and boot from there.
This would be trivial in OSX - just use carbon copy. But, I can't get it done using Acronis True Image 2010 or any other utility I've tried while in XP. Everything wants to clone the entire 1 TB and not simply the 80ish GB of files.
What should I use to accomplish my goal (or what must I do different with Acronis)?
I what I would like to do is Clone the internal hard drive of my Mac Pro (I believe its a Mac Pro 1,1. 2.66 dual core Xeon), and use the clone in the current model Mac Pro Dual core 2.66 thats out now.
I need to have both machines running everything the same as both my studio's are in two different locations.
We have an old iMac G3 (very very old) it is teal and has a slot loading cd drive. It has a 233 mHz processor, 160 MB RAM and a 4 GB hard drive. We are planning on giving this computer away, but, before we erase the drive, I want to make an exact duplicate of it (perhaps as a disk image or on another physical drive.) The G3 has no firewire ports (only USB) but I can access it through the filesharing LAN. I tried using disk utility on another mac on the network to "create a new disk image from folder" and selecting the hard drive for the G3 on the network. It failed giving me a permissions error.
Any clue how to clone this drive? A disk image is a preferable method, but I am willing to spend money on an external drive if necessary.
I just purchased a MacBook Pro running the latest Leopard OS. I hooked up a Lacie external HD using FW 800 to backup a bootable system of my complete HD. I used Intego Personal Backup. All seemed to go well and the backup showed up on my startup screen in Preferences. Problem is it will not boot my sytem up. Tried twice and cleared my Lacie prior to backup. The Lacie also showed up as a startup disc when I did an Option startup. Never had such a problem with Tiger but I always used FW which the MacBook does not have. I am now trying Carbon Copy Cloner to make a backup but it is not complete. Does the MacBook using Leopard have any special requirements for a backup such as a particular cable cable to use?
