I have a G4 400 Mac desktop running plotter software that I need to put on a new drive in the same machine. The current drive is making clicking sounds at start up that probably indicate poor drive health. How do I clone the current drive to a new drive in a way that will allow me to just switch start up to the new healthy drive and keep running the plotter software as usual?
View 3 RepliesI have been a user of SuperDuper! for some time and understand the process of making a bootable clone of my startup drive. The other day, my bootable backup drive crashed. It was an Iomega that had been partitioned and worked fine as a bootable backup until the drive itself failed. The Iomega was a Firewire 400 drive.
When I bought a replacement, I bought a Western Digital FW 800/400, USB 2, eSata connection system. 1 TB. I partitioned it and created a bootable clone with the latest version of SuperDuper! The operation went smoothly until I tried to actually boot from the newly created clone. I could select the clone from the Startup Disk panel, but my Mac refuses to boot from it. It looks, then says, "Hmmm! I think I'll start up from the internal drive." I have another WD FW 400, USB 2.0 drive and it is bootable as well as a LaCie FW 400 that I can make bootable. Only this one drive that has no specific FW 400 port will not boot. I tried it as FW 800, no dice. I connected with the adapter cable to the FW 400 port, no joy.
I can return this WD drive for exchange. My question is should I expect the same results if I exchange it for another drive of the same type? Or is there a chance that a new drive of the same type will work?
PowerMac, dual G5 2 Ghz, OS X 10.4.11. It has a FW 800 port as well as FW 400.
Can Carbon Copy Cloner clone my internal drive and media drive on one bootable back up?
I believe time machine can but I like the idea of bootable back ups.
What I want is. 250GB internal + 500GB media CLONED to 1TB drive.
I am planning to buy a 500GB laptop harddrive, put it in an enclosure, and use CarbonCopyCloner to make a bootable clone of my Mac's internal 500GB Drive. This way, if there is a problem with my internal drive, I can just swap in the cloned drive and boot from that, never missing a step. However, I am wondering if this is a good strategy. What if something else fails on my mac like the motherboard - would I be able to boot my cloned drive on another mac?
View 3 Replies View RelatedI have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.
My current hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I have a mirrored drive door G4 [dual 1.25 GHz] with 10.2.8. I would like to make a bootable clone of this drive on an external hard drive, to use in case this computer fails somehow.I know there is software available to do that. Are there any particular mistakes a person could make in doing this that someone here can identify and explain how to avoid?
View 3 Replies View RelatedMy internal HD failed. I have a recent Super Duper bootable Clone connected with FW800. The option key at startup doesn't allow me to access the clone drive. I press the start key, wait for the "bong," hold down the option key and nothing happens - just whiring, some crunchy sounds and a solid blue screen. I was able to reset the PRAM using the command-opt-P-R keys and got the 2nd "bong", but that hasn't helped the problem. It's a 2008-9? MBP running 10.6.? I've order a replacement internal drive. I was hoping to be able to boot to the clone and work in the meantime.
View 1 Replies View RelatedMy Imac cannot find its hard drive. When I turn it on it shows a folder with a blinking question mark. And even when I go to reinstall the software it can't find a destination. What can I do?
View 2 Replies View RelatedI want to download a new software for my mac but a message pops up and says it recommends i back up my files on time machine. Can you back up on an internal hard drive or do you need an external hard drive to do it?
View 3 Replies View RelatedI have 2ea 250GB internal HD. One with my apps and system on it and the other with no data. How do I mirror my drive with the apps and system? Or is that possible?
Information:
Dual 2.3ghz PowerPC G5
Mac OS X (10.4.10)
8 GB ram / 2ea. 250 GB internal HD
my friend internal drive failed today and i got a new Seagate 500 sata to replace it
1- boot from my usb stick OSX 10.9 installer, select Disk Utlity and create 1x partition Mac OS Extended (Journaled) and got an error: File system formatter failed
2- boot from CMD + R and had exactly the same problem
3- tried another used but good internal HD and same problem
4- used my other macbook Retina and start the setup connecting the new seagate w/ Apricorn SATA-USB and reboot after setup. working fine after boot
5- installed that new seagate w/ 10.9 installed and working from my MB retina in the defective MB 13 and NEW ERROR:
"SecurityAgent may only be invoked by Apple software".i replaced over 100x internal HD on Macbook computer in the last 10 years and NEVER see that problem..
thinking back from pre OSX days with regards to OSX. Is there any difference whether or not the boot system (including applications, etc.) for your computer was put in place by their installers or made from a (backed up) clone or copy of that system? I suppose it doesn't since people clone their drives all the time. I sort of remember from pre osx days of an installed system being ~blessed~, if I remember the vernacular correctly. But even still, don't know if it meant anything back then either
View 3 Replies View Relatedi'm about to install new computer setup at work with multiple of the same PC desktop's and laptop's. This would be a piece of cake with MAC, using target disc mode and clone each stations with same setup. BUT how to do this in the Windows environment? I really don't want to install each individually = huge waste of time.
View 7 Replies View Relatedi am in search for the best cloning application to clone & backup my the main Hard Drive. I do not mind paying for it. Free is better!
I just have way too many stuff installed on my main hdd. I just cant imagine that hdd failing and the time I have to spend to install everything back..
I have an old G4 system with Pro Tools recording software and related Plug-Ins installed and running flawlessly. Bad news is that the drive is about 9 yrs old and I want to make a backup before selling it to someone so they can have a bootable backup drive instead of having to re-install the whole system if the internal drive craps out.
The OS is 9.2.2. It is not classic and has no version of OS X on it t all.
How do I make a bootable clone of the whole system discs, apps an all, to an external firewire drive?
I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies View RelatedWhen I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
View 8 Replies View RelatedI just cloned my hard drive to a new and bigger drive. I did the OSX 10.5.8 update on the old western digital drive as a safety precaution, so that if it screwed up I would still have a good copy on my new Seagate barracuda. The update looks to have gone well and I will be waiting for a couple of trial days before backing the drive up again. My question is, when I clone the drive again(to the new seagate) how will that work? Should I erase the existing disk image(10.5.7) on that drive or will it overwrite the existing image with the new 10.5.8 one? This is the first time I have used carbon copy and don't really know all the in's and out's of it.
View 1 Replies View RelatedI want to keep my applications etc on one internal HD and use my second internal HD as a back up.I am a graphic designer, and i have been backing up to an external LACIE Porche 160 Gig firewire HD. This has worked fine, but...My second internal HD (112 gig?) is still loaded with 10.3 and has adobe CS2 on it along with some other crap that I no longer need.I have loaded Adobe CS3 on my primary drive and have all the files I need on that one...What is the best way to set up my second HD as a "slave" drive to improve the performance of my G5 dual 2 Ghz??Will there be any issues now that I loaded Leopard on the primary HD?
Information:
Power PC G5 Tower 2 Ghz dual processor (2004?) with two internal hard drives
Mac OS X (10.5)
How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one? I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.
Info:
iPod shuffle, Mac OS X (10.7.3)
I have a Macbook running on snow leopard and I wanna upgrade my internal hard drive as it is currently too small. I downloaded Carbon Copy Cloner and cloned my entire hard drive to an EXTERNAL HARD DRIVE. Now, I have that new internal hard drive from wester digital. What do I do with it? replace the current internal hard drive with the new harddrive and then how do I get the data from the external hard drive with my cloned data to the fresh western digital? Do I boot first from external hard drive etc? I am not sure what to do now?when I was given the option which hard drive to clone (or which part of the hard drive to clone) there was also the option to clone "Install Disk". I don't need to clone that, right?
View 3 Replies View RelatedI had some problems with my 17" MacBook Pro and needed a replacement immediately. The Apple Store didn't have a 17" that met my requirements so I bought a 13" that I plan to give to my wife to replace her 13" non-pro.
So. I'm ordering a 17" over the Internet. When it arrives, I'd love to avoid ALL the configuration that I just went through to get this new 13" setup like my old 17". Is there any way to completely clone the drive in my 13" MBP completely and transfer the data to the new 17" MBP when it arrives?
i hear its possible to make a install emergency disk using a flash drive, i purchased a HP USB 16GB flashdrive v 165w, [URL]
i formated the drive as a Guid Partition, ignored preferences and all the stuff i could find online to see to it that i did it right but no go,
can anyone tell me if this drive is incompatible or which one i should exchange it for?
i tried cloning my original OSX Leopard DVD and i get errors when from both CCC and Super Duper,
I'm planning to replace my boot hard drive with a pair of RAID0ed SSDs. In order to familiarize myself with certain techniques I have build a software RAID0 from two 160 GB Maxtor SATA I hard disks. That went pretty much without problems. The two HDs are now sitting in position 1 and 2 in my Mac Pro.
The problem arises when I try to clone my boot drive onto the new RAID 0 drive. I was using disk utility and got an error message. Then I thought my fault was using disk utility from the HD which I wanted to clone and booted from the Leopard install disk. I then used disdk utility from that source to clone the HD boot drive to the RAID. Again I got the error.
What is going wrong? Do I have to approach this completely different?
I use carbon copy clone for my mac to copy boot drives, what do I use for the windows boot drives/partions to move to a different drive?
I've got Mac OSX on one drive and Windows 7 on another and will be installing a 160gb SSD drive for boot drive this weekend. I just want to copy the windows boot drive to the SSD drive partion I've created for windows.
trying to help my mat out with his laptop. Disk is small and full. Sadly I used to using Linux and Windows and not Mac Os. I have mounted the new drive in a caddy and conncted it. Now jsut need to kow a good way to copy the entire thing to the new drive and make it bootable.
IF it was Linux I would jsut dump the file system and in windows I would use symnatec but I have been told this isn't good for Mac's.
I'm thinking of upgrading my HDD on my new Mac Mini(2.0 GHz Core 2 Duo) and I'm wondering if this is possible. I would like to clone the old to the new without having to buy a USB or Firewire to SATA adapter. Would it be possible to disconnect the Super Drive(CD/DVD) and connect up the new drive, use Super Duper to clone, then replace the old with the new and reconnect the Super Drive?
I've searched the forums to see if anyone has tried this but I didn't find anything. I'm not even sure if there is a second SATA port that would work for a HDD. I know the Super Drive is a SATA because it's listed when I look at system info.
I've seen a lot of folks using USB or Firewire to do this so that's my backup plan but it would seem if I can get both drives connected this would be pretty straight forward.
I'm about to partition my WD passport into two section . It's 120 gigs and I'm going to use 100 gigs to back up all by media on my mac (pictures music video) and then I'd like to have a 20 gig section for extra flexible storage/transporting files from computer to computer, including PCs. So carbon copy cloner says the drive has to be formatted to HFS+ but in disc utility I don't see HFS+ under partition/format. also for the smaller partition what would be the best format for what I described above?
View 7 Replies View RelatedGonna turn in my MBP later this week, because of a broken hard drive. What do I do before turning it in? Should I clone the drive (for backup) and then format and zero it out, to remove personal information?
View 5 Replies View RelatedI have XP on a 1 TB HDD (only about 80 GB is used) and I want to move it to a 120 GB partition on an SSD and boot from there.
This would be trivial in OSX - just use carbon copy. But, I can't get it done using Acronis True Image 2010 or any other utility I've tried while in XP. Everything wants to clone the entire 1 TB and not simply the 80ish GB of files.
What should I use to accomplish my goal (or what must I do different with Acronis)?
