Installed m4 crucial SSD and I cannot erase and format new drive. I get an error "wiping volume data to prevent future accidental probing failed."
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I'm trying to format my disk due to an error with boot camp. However, I cannot push the erase button as shown below.
View 2 Replies View RelatedI've been having problems booting into my OSX partition. At the time it started I wasn't using my Macbook Pro (Late 2009) very often so whenever I needed I just booted up into my BOOTCAMP partition. Anyways, I decided to finally stop being lazy and do a clean install. There's nothing on either partition of the same hard drive that I want. I put together a bootable USB drive and boot from it. From here I go to the Disk Utility and try to erase the entire drive. It gives me this error: URL....
Now, that's not a screenshot from my mac but its the exact same error. Anyways, I've tried to find something on point but I just can't. Some posts have stated that the hard drive is broken, but if that's the case why can I start up the BOOTCAMP partition of the exact same drive flawlessly? I can even manipulate files on the OSX partition from Windows 7.
Info:
MacBook Pro, OS X Mountain Lion (10.8.1)
I'm running Snow Leopard on my new Macbook Pro. I've got a 1.5TB External hard drive that I'm trying to figure out how to format in HFS+ with Apple Partition Map. I can figure out how to format in HFS using Disk Utility, however it still does it in GUID format and I do not know how to do it in Apple Partition Map.
Googleing this for hours has lead with all kinds of information on how to go to GUID FROM Apple Partition Map but not the other way around. I know GUID is the new hottness.. but this drive will be used exclusively to connect to my XBOX 360 and it supposedly only reads HFS+ when its formatted with Apple Partition Map. (I have tried it with Mac OS Extended (Journaled) with GUID, and the XBOX does NOT recognize it) I do not want to use Fat 32, (I know that that is the other major option) beacuse it limits file size.
Is there anyway to erase my hard drive on my old broken mbp? (fried logic board) I want to sell the whole unit, but feel that the only thing i could do is take out the hard drive and sell everything else. Id prefer to not have to dismantle my mbp as it is somewhat time consuming. Is there a way to erase it within the mac?
View 2 Replies View RelatedHow do I erase my hard drive? In Utility>Disk Utility, but the only option highlighted is "Erase Free Space".
Info:
MacBook (13-inch Mid 2007), Mac OS X (10.5.8)
Is there an program available to erase OS X Lion and format the HD like "dban" for Windows?
View 1 Replies View RelatedGonna turn in my MBP later this week, because of a broken hard drive. What do I do before turning it in? Should I clone the drive (for backup) and then format and zero it out, to remove personal information?
View 5 Replies View RelatedIs there any reason to erase hard drive and do a new install other than selling mac or new os?
View 3 Replies View RelatedMacbook OS X 10.5.8 and a WD 10EAVS 1TB External Hard Drive. That's all. I was given this by a fellow student on campus who was graduating. So I want to use this to store my iTunes Library (my Macbook's hard drive ran out of space). Here's what I do:
- Macbook is turned on and running
- I plug the external hard drive into a working outlet --> Hard drive turns on
- I plug the external hard drive into the mac using a USB connection --> Disk Insertion Error message: the disk you insterted was not readable by this computer
- It is not readable so I open it in Disk Utility (the hard drive is listed/recognized)
- I attempt to erase and/or partition the hard drive in order to format it in Mac OS Extended OR Mac OS Extended (Journaled), but I get one of these two messages: "Disk Erase failed with the error: File system formatter failed." OR "Disk Erase failed with the error: The underlying task reported failure on exit."
I attempted to look up what these mean or how to fix the problem but nothing is really working. I was able to format the hardware line to MS-DOS (FAT) and the sub-line as Mac OS Extended (Journaled) but I don't even know if that's right or not.Basically, I need my computer to recognize this hard drive whenever I plug it in and to run smoothly as "extra space" to store my music on.I haven't had A LOT of experience with external hard drives but enough to get things done. But this problem is a killer.
Info:
mac book, Mac OS X (10.5.6)
I just received my new MacBook Pro. It came with 250 gb of hd space. I had to do an erase and install on it because of an issue that came up while using the migrant assistant. So, after doing the erase/install it says that I only have 216 gb of space left? And thats without the applications CD that I have to put in which will be about 4 gb. I believe when I first turned the computer on before doing the erase/install it had about 235?
View 9 Replies View RelatedI have the Seagate Momentus XT and I have a quick question. If I reformat the Hard Drive portion does that erase the SSD side as well? If not how do I erase the SSD side of it.
View 1 Replies View RelatedI'm trying to erase my SSD internal drive that is corrupted software (Yosemite).I'm booting from an external with 20GB Yosemite OS & 480GB that contains files I've dragged off the internal SSD.I'm getting the error:Volume Erase failed with the error:Couldn’t unmount disk.How can I get around this?
Info:
MacBook Pro, OS X Yosemite (10.10), 13"
I have a MacBook Pro running OSx 10.9.4 and have been successfully using Time Machine with a WD My Passport External Hard Drive for a while. Now (after 10 days with a successful back-up), the computer will not back-up. I have gone into disk utility and tried to erase, partition, and/or repair the disk, but repeatedly get error messages - it can't erase the disk, re-partition the disk or unmount the disk.
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.4), External Hard Drive
I have to return m my Macbook to Apple, and they asked me to erase the hard drive. I booted from disk went into disk utilities select the Macintosh HD and did a 7 pass erase. But it says in the stats (appear at the bottom) that there is still 6 folders, 425 MB space used and 2 files. Should it not say 0? I am unsure if I have done this correctly.
View 2 Replies View RelatedI recently received a Macbook hard drive for my niece. She trashed her Macbook to the point that i is not worth repairing. I usually work with PCs and am a hardware familar with Macs. I have a ineterested party for the hard drive but they want me to erase the drive and reformat it so they can use on a Mac. They will put on the OS. Is it possible for me to erase it and format it for use on a Mac with a PC? I don't own a Mac.
Info:
iPod classic 160GB (Late 2009), Windows
7
I am having issues with formatting my main drive in my Macbook Pro (mid 2009) to install Leopard.
I have booted off of several Leopard and Snow Leopard install discs and attempted to use Disk Utility to format my drive. Everytime I try to format the drive I get one of two errors: 1. input/output error OR 2. Unable to allocate memory.
I have tried using several hard drives.
Which format would be most appropriate for reformatting my external drive whilst keeping it compatible across platforms (mac and windows)??
Info:
MacBook Pro
I work for a post secondary school with online formatted classes. We send flash drives out to students to access video content when they are on the go, but it was pretty much made for Windows based computers. I have had a few students now who have Macs and cannot open the content or are getting a message stating the drive is not formated. I see many instructions on how to format a flash drive from a Mac to work on a Mac & PC but nothing about being able to format the flash drive using a PC so it can work on a Mac.
Info:
Dell, Windows XP Pro, Windows 7
Verbatim Store 'n' Go USB 2.0 Portable Hard Drive 500Gb
this is a external hard drive i am looking to buy,but it has Nero back it up and burn software already on it,so in order for me to use it on my macbook,would i need to format it?
I have a macbook pro with a water damaged keyboard that I am selling for parts. I need to know if there is anyway to delete all of content and or format the HD without the use of an apple keyboard. I have a cheap external keyboard i am using that does not have the apple command and options key.
Info:
MacBook Pro
I have OS X Lion. I recently purchased this Macbook Pro 15" laptop, and I am planning on returning it, to get the newer upgraded laptop, as the store manager said I can do this, since I purchased my laptop within 30 days of the announcement of a new MacBook Pro. I would like to format everything, before I return it back to the store, however, it never came with an installation cd. How can I do this? I have tried ways that I have heard, such as creating a new admin user account and deleting all the other accounts. Also I have erased all the free space using the disk utility section. However, it will not allow me to erase the hard drive. Is there a way to do this without an installation cd?
Info:MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
I want to move from pc to mac but I'm struggle if it will support my flash drive format NTFS. Will it support ? or it support only FAT32 ?
View 1 Replies View RelatedI recently tried to install a back-up copy of Leopard onto a USB hard drive, as a precautionary measure if my drive ever did die. I had partitioned my drive into 3. One for the Leopard Boot (Mac OS Extended Journaled), one for Apps (Mac OS Extended Journaled) and one for files (FAT 32).
The installation pooped out on me, probably due to the amount of free space available.
Earlier this week, I decided to reformat the drive into 1 partition. Unfortunately I ran into a spot of bother....
Click for full size - Uploaded with plasq's Skitch
And when running First Aid - I get this:
Click for full size - Uploaded with plasq's Skitch
I just want to know, is it OK to erase the whole internal drive (not 'Macintosh HD' partition) and install a clean Lion? Will all the partitions be lost after erasing the drive? And when a new Lion is installed, will it automatically create two partitions: "Macintosh HD" and "Recovery HD"?
Info:
Mac OS X (10.7)
I bought an imac 2 years ago, and updated it to leopard when that was released.
I no longer have the discs i used for Leopard, only the original mac os x 10.4 discs.I am very soon going to be selling this machine and need to wipe everything so that all is left if the operating system in the form you would expect as if you had just bought a new mac.How can this be achieved, i tried disck utility> erase, but only erase free space was 'highlighted'.
I just replaced my hard drive today. I booted it up and went to disk utilities to format it and all of that. When I finished I went to restore system from back up and plugged in my external hard drive and the computer said there was no history of back up from Time Machine. This was strange because before I formated the hard drive and tried to restore the information, it recognized that there was back up information. I decided I would re-install the os and try again.
View 6 Replies View RelatedWhich is the best way to format external hard drive to be compatible with both Lion and windows, and at the same time support high data transfer?
Info:
MacBook Pro, Mac OS X (10.7.1)
I am going to be selling my trusty 12" PowerBook G4 to a friend soon, and putting the money I get from that towards a last revision 15" PowerBook G4. After I transfer my data from the 12" to the 15", I want to completely and securely erase my hard drive. The thing is, I don't know how to do this! I've never formatted/erased a hard drive before.
View 14 Replies View RelatedI am using a macbook with an Intel Core 2 Duo (about two years old) and I am running leopard (10.5.8).
I have been using a Western Digital 250GB External Hard Drive with a firewire connection to utilize Time Machine for the past 6 months. All was going reasonably well until recently. (It would occasionally get stuck backing up and I would have to restart my computer and then backup again, but otherwise ok)
Last week I turned my computer on and it didn't recognize the drive. It gave me the "Initialize" "Ignore" option screen. I tried everything before I tried erasing it, but eventually I decided to lose all of that backed up data and just erase the drive and start from scratch. (I backed up on a different drive prior to trying this.)
Anyway, now when I go into Disk Utility and click on the Erase tab and then try to erase the drive (doesn't matter which erase option I choose) it says it is unable to erase the drive. If it is plugged in w/the Firewire cable then it gives me an "Invalid Argument" error. If it is plugged in with the USB cable, it gives me a input/output failure error.
Does anyone know if I can fix this drive? Any ideas as to what may have caused the problem in the 1st place. Months ago I accidently unplugged the drive without ejecting, but it worked for for a long time after that.
