MacBook :: Clone OS Leopard - Bootcamp To Larger Drive
Jul 19, 2009
I have a Macbook (about a year and a half old) with 250 G hard drive which is partitioned in half. One half has Mac Os (leopard) and the other bootcamp partition is Windoze xp. I use both equally. I am planning to get a 500-750 G 2.5 inch hard drive and clone my entire hard drive to it so I will have more room (and also a good backup if the need ever arises). Since my drive has BOTH the Mac os and the bootcamp partiton with windoze on it, I need to clone them both over to the new drive. I believe superduper just clones the OS portion and I really don't want to re-install the windows stuff unless i have to! I read that winclone can clone the windoze partitian. SO THIS IS MY PLAN. I AM NOT SURE IF THIS WILL WORK. Is this right? Did I leave anything out? Is there a better way?
1. Get new larger drive and put in a separate powered enclosure
2. Connect to my macbook with usb connector
3. Use superduper to clone the Mac Os to the new drive.
4. Use Winclone to clone the bootcamp (windoze) partition to the new drive
5. Replace the old smaller drive with the new drive.
I think this would work, but am not sure how or when i have to partition the new drive to work with winclone. or does winclone do this automatically?
I have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.
My current hard drive is partitioned as follows:
Name: Macintosh HD Format: Mac OS Extended (journaled) Size: 132.5 GB Name: BOOTCAMP Format: Windows NT File System (NTFS) Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD Format: Mac OS Extended (Journaled) Size: 973.51 GB Name: BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info: MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I have XP on a 1 TB HDD (only about 80 GB is used) and I want to move it to a 120 GB partition on an SSD and boot from there.
This would be trivial in OSX - just use carbon copy. But, I can't get it done using Acronis True Image 2010 or any other utility I've tried while in XP. Everything wants to clone the entire 1 TB and not simply the 80ish GB of files.
What should I use to accomplish my goal (or what must I do different with Acronis)?
I've done a byte to byte clone of my original 320GB bootcamp drive to a 750GB drive (connected via USB). So I remove the 320GB from bay 4 (MacPro) and slot in the 750GB into bay 4. I fire up my MacPro hit the Option key during power up and all I get is an option to select my Mac drive not my new 750GB Windows drive.
So I boot into OSX (since I have no other option) and I can see my "Untitled" Windows drive on my desktop. I can select it and browse it and I see all my Windows files. Also, under System Preferences - Startup Disk, I can see my "Windows on Untitled" listed.
I have a mid-2009 MacBook Pro 17" computer. I bought a 750gb Hitachi drive in an upgrade kit from OWC. I have formatted it and now using Carbon Copy Cloner am making a copy of the internal 500gb drive. I am not very familiar with Mac OS X drive partitions. When Carbon Copy Cloner copies the 500gb partition from my Pro, will it leave the other 250gb or will I need to use Disk Utility or somethng else to format the remaining space? I would like to put the 750gb in the Pro moving the current 500gb into the external housing if possible.
I have a 50GB windows partition through bootcamp. The problem with it is that it's too small and i constantly have to uninstall games to put new ones on. How can i re-size it without backing up all my saved games, removing the partition and making a new one?
Before leopard was released I installed windows on my mbp using the BootCamp Assistant. I have since reformatted the computer and while the windows partition remains, bootcamp assistant is gone. A few questions:
1. Is there any way I can make the windows partition larger? I want to install a few new games on it 2. If not, how can I delete the windows partition straight up? 3. Once the windows partition is deleted, how can I reinstall windows without upgrading to leopard? Is there any where I can get boot camp assitant still? I still have a burned CD with the Windows Drivers along with my copy of XP w/ SP2.
When I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
So, I've got an old windows laptop running XP that has a few programs on it that I occasionally need to use and the 17" MBP in my signature line. Here's what I want to do. Set up a Bootcamp partition on the MBP's hard drive and then clone the older windows laptop's hard drive to that partition. Is this possible? The thought is that my Windows software is already installed and set up and thus cloning would be the easiest way to make a smooth transfer as opposed to setting up Bootcamp and essentially starting over with having to install everything I would need.
I don't know anything about cloning software on the PC side, but have used Carbon Copy Cloner for my mac cloning needs in the past. My windows laptop does not have firewire, only USB and removing the HD from the laptop is not an option. I was hoping I could clone the windows drive to an external and then use that external to clone to the Bootcamp partition.
I plan to upgrade my hard drive from 320 gb to 750 gb. I have a macbook pro 13 inch laptop which I purchased last October. Can I just do a fresh install of osx lion on the new hard drive? Do you guys recommend hard drives from Western Digital or Samsung?
I have purchase a new hard drive for my MacBook Pro Intel 2 Core duo and know how to do it, but once it is installed in the machine, I want to know how to install the operating system. The computer now is almost empty (only a few photos I have backed up) so there is no need to transfer any data. Do I just use the discs that came with it? Please tell me how I restore the system with this new hard drive.
This old unit needed a bigger hard drive, so a friend gave me a Hitachi 60 GB drive he didn't need and I installed it. He told me that it was formatted for MS-DOS and that I would need to reformat it for Mac OS. I'm pretty sure that I did accomplish that using Disk Utilities in the Installer program.
I put a OS 10.4 install disk in and tried to boot from it. My problem is I'm getting a screen alert that says, "This software cannot be loaded on this computer." I can either restart (what good is that?) or go to "Startup Disk" where I choose the install disk (or Network Startup) and click on Restart. Then I choose English as the main language and bang! - right back to the wonderful, "This software cannot be loaded on this computer."
I'm thinking about getting a bigger internal HD for my 15 inch macbook pro. Currently 250GB, want 750gb. I have Macbook Pro 15 inch unibody A1286. Will it fit? And will there be more heat coming from a larger drive? If so is it advisable to avoid a larger drive because of heat issues?
I had some problems with my 17" MacBook Pro and needed a replacement immediately. The Apple Store didn't have a 17" that met my requirements so I bought a 13" that I plan to give to my wife to replace her 13" non-pro.
So. I'm ordering a 17" over the Internet. When it arrives, I'd love to avoid ALL the configuration that I just went through to get this new 13" setup like my old 17". Is there any way to completely clone the drive in my 13" MBP completely and transfer the data to the new 17" MBP when it arrives?
My new Macbook is only 1 week old, so there is not much (or any) useless crap that I don't want or need. The Macbook came with a 160Gb hard drive. Prior to switching to Mac I was a 4-year Linux user. I purchased a new 320Gb drive for my Linux-PC laptop just 2 months ago. I took that drive out and would like to put it in my new Macbook. I would prefer to transfer data from old to new drive rather than starting fresh all over again. So I assume Time Machine is the way to go, and/or use Migration Assistant. My question is how Time Machine works, exactly.
In Linux when you do a backup using Partimage, it backs up byte-for-byte, meaning that if you back up a 100Gb drive, it will restore that same volume size regardless of how much bigger the restore drive is. Put another way, if you buy a 150Gb drive and restore, you will end up with a 100Gb drive with no space left over. I want to avoid this! So how will I backup and restore, and at the end have a 320Gb drive, rather than another 160Gb drive? Will I have to install the OS on the new drive before I restore? And yes, I do have an external hard drive I can back up to, though I haven't used it yet.
I have a Mac Book Pro core duo with a partition running windowsXP pro. The hard drive is almost completely full. I want to replace the drive with a larger drive and clone the current drive. Is there a way to completely clone the drive complete with the partition, boot camp, windows etc? I'm running mac os 10.4.11
Gonna turn in my MBP later this week, because of a broken hard drive. What do I do before turning it in? Should I clone the drive (for backup) and then format and zero it out, to remove personal information?
I just purchased a MacBook Pro running the latest Leopard OS. I hooked up a Lacie external HD using FW 800 to backup a bootable system of my complete HD. I used Intego Personal Backup. All seemed to go well and the backup showed up on my startup screen in Preferences. Problem is it will not boot my sytem up. Tried twice and cleared my Lacie prior to backup. The Lacie also showed up as a startup disc when I did an Option startup. Never had such a problem with Tiger but I always used FW which the MacBook does not have. I am now trying Carbon Copy Cloner to make a backup but it is not complete. Does the MacBook using Leopard have any special requirements for a backup such as a particular cable cable to use?
I recently bought a Macbook Pro with a 200gb hard drive. Right now I am running bootcamp dual-booting OSX 10.6.5 and Windows7 100gb partitions each. I just got done configuring everything and then my friend offered me a 500gb hard drive for $50 so of course I had to buy it.
I am wondering if it is possible for me to clone the hard drive I currently have to the new 500gb hard drive and then extend the partition sizes so I don't have to go through and reinstall everything on the Windows side again.
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
I'm going to be swapping the 250 GB drive in my 2008 MBP Penryn (17) for a Seagate Momentus 500/7200rpm drive. There are two ways to go. One is to put the new drive in an enclosure and use SuperDuper or CCC to clone the main HD and then swap them. The other is to use Time Machine. That means installing the new drive blank, boot from the OS disk and format. Then go to the most recent TM state and restore. My available external HD is the FW800 Western Digital Studio. It has space for a partition big enough for the cloning. The case coming with the Seagate is the Other World Express USB2. I have good pdfs on the install procedure. Need to remember to print them, first.
I want to find the best way for a new college student to back up her MacBook Air files. Can she use cloning software and an external hard drive? I'm unclear if the Air supports attaching an external hard drive.
Title says it all. Basically, I reformatted my new flash drive to MS-DOS (which I think/suspect it was already) and files copied onto the flash drive become much larger. For example, a 275 megabyte folder full of images turned into a 425 megabyte folder-even when dragged off the flash drive.
What could cause this? I do suspect that it's a labeling error, as the file doesn't act like it's gained size.
I have an early-2008 iMac with 2.66GHz processor, 4 Gig RAM and a 500Gig Hard Drive. Can I increase Hard Drive size in any way? I also have a 500Gig Time Capsule for my backups..
Info: iMac (20-inch Early 2008), Mac OS X (10.7.3)
I'm using an older G5 single processor. I've reached the Max with a 300 Gig Seagate 2nd internal drive. I've run out of FCP srcatch disk space. I have about 75 Gigs left. I researched a Seagate HD Model ST3750640AS - Interface SATA - it's 750 Gigs. I just wanna make sure that the ones sold by New Egg etc., are compatible. Here's New Egg's; [URL].
I also wanna make sure that I've choosen the correct path to back up the 250 Gigs of data; First I need to copy all of the scratch disk files into another Hard Drive. Perhaps one of my external Lacie's. I'm familiar with how to Erase the New Drive, and format the New drive using MAC OS extended Journaled. Next (in turn), I'll need to copy all that data (little bits at a time), back to the New Seagate internal drive.
Information: Power Mac G5 Desktop (Single Processor 1.8) - G4 800 MHZ Quicksilver - OS9&X Mac OS X (10.4.6) G5: 4 Gigs RAM - ATI 9800 Pro AGP - #2 Internal HDs #3 Lacie Ext. HDs
I just cloned my hard drive to a new and bigger drive. I did the OSX 10.5.8 update on the old western digital drive as a safety precaution, so that if it screwed up I would still have a good copy on my new Seagate barracuda. The update looks to have gone well and I will be waiting for a couple of trial days before backing the drive up again. My question is, when I clone the drive again(to the new seagate) how will that work? Should I erase the existing disk image(10.5.7) on that drive or will it overwrite the existing image with the new 10.5.8 one? This is the first time I have used carbon copy and don't really know all the in's and out's of it.
I have a power mac G5 2.7 that is 2.5 years old. It came configured with two 400GB drives inside as it will only hold two. I now really want to change them out to either two 750 GB or preferably two 1TB drives. Apple, however, has told me it won't work and that my unit will not handle this huge additional power consumption. I have called mac mall and they say no way as well. OWC says they have many working like that and its never been a problem. Then I called Apple again and they said it will work fine. I have 6 more months of Apple care, but either way do not want to blow the interior of this system up. I know I need SATA drives and would ideally like to purchase the Hitachi Deskstar 7K1000.
