MacBook :: Installing New Internal Hard Drive, Safely Clone The Existing BOOTCAMP Partition?
Jul 4, 2012
I have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.Â
My current hard drive is partitioned as follows:Â
Name:Â Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GBÂ
Name:Â BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GBÂ
When I was partitioning the new drive I did so as follows:Â
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GBÂ
Name:Â BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
View 8 Replies
ADVERTISEMENT
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Jan 29, 2010
I have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
View 5 Replies
View Related
Jul 9, 2009
I have MBP 17", 2,53GHz, hdd is 250GB. I have a lot of music and pictures and quite lot movies. On the other side I have a lot mails. Is it better to make two partitions and keep them separate? What is your suggestion? If I decide to do that, do I need to remove everything from hard drive to make another partition? I never did it before on mac, but I remember that is necessary on windows.
View 5 Replies
View Related
Sep 29, 2009
I'm currently running BootCamp with Vista, but I'm getting tired of rebooting. If I install Parallel would I have to reinstall Vista again, or can I use my current partition?
View 20 Replies
View Related
Oct 20, 2009
So, I've got an old windows laptop running XP that has a few programs on it that I occasionally need to use and the 17" MBP in my signature line. Here's what I want to do. Set up a Bootcamp partition on the MBP's hard drive and then clone the older windows laptop's hard drive to that partition. Is this possible? The thought is that my Windows software is already installed and set up and thus cloning would be the easiest way to make a smooth transfer as opposed to setting up Bootcamp and essentially starting over with having to install everything I would need.
I don't know anything about cloning software on the PC side, but have used Carbon Copy Cloner for my mac cloning needs in the past. My windows laptop does not have firewire, only USB and removing the HD from the laptop is not an option. I was hoping I could clone the windows drive to an external and then use that external to clone to the Bootcamp partition.
View 6 Replies
View Related
May 18, 2010
I am looking for a way to clone my HDD that has Leopard and BootCamp XP Partition all in one shot without having to do 2 seperate backups.
Also after I have the image, I would like to deploy to around 150 Mac Minis not at the same time atleast 2 or 3 at a time.
View 2 Replies
View Related
Jun 21, 2009
As soon as I bought my Mac I created a partition for Windows on Boot Camp. I later realized that I didn't need it, but then it was too late, 30GB of my Hard Drive was already partitioned. Is there a way to revert the process and re-claim my 30GB to use with the Macintosh system?
View 4 Replies
View Related
May 14, 2009
I had windows in a bootcamp partition for a while, and today, i decided to erase the partition and make a new, bigger one. I erased it just fine, but I can't make another one, it just gives me this error: Verification failed: this disk could not be partitioned. Use disk utility to repair this disk. I went to disk utility and i clicked verify disk (repair disk was not highlighted) and it gave me another error: filesystem verify or repair failed. I also repaired disk permissions with no such luck.
View 17 Replies
View Related
Jul 31, 2010
I'm getting a new imac in a weeks time, and was wondering about bootcamp. When I wanted to dual-boot a PC and Linux, I had to partition the hard-drive and install the OSes before doing anything else. Do I need to do that for bootcamp and Windows 7? I only really need windows on bootcamp for a game that's coming out in 2011. Do I need to install it now or can I wait?
View 3 Replies
View Related
Jun 17, 2009
I previously had a Windows partition that I created with Boot Camp. I was running out of room and wanting to try out Windows 7, so I deleted it and tried to create a larger one. So far, i have not been able to create a new partition. The error I'm currently getting reads "Verification failed. This disk could not be partitioned. Use Disk Utility to repair this disk." When I do that, I usually get that it needs repairing, I repair it, and then it happens again. I've done the repairing using the Leopard DVD or booting from another hard drive that's bootable. Another error I was getting said there is currently data there that cannot be moved. That errors told me to back up, wipe my hard drive, and do a reinstall. I really don't want to have to do that, and I really don't NEED Windows, but I did recently want to play some games and dug up my old games for Windows.
View 9 Replies
View Related
Oct 13, 2009
I'm both elated and pissy at the same time. Something happened to my mac when I was traveling, be it a latent hardware flaw, damage, or some other random act, and my mac OSX partition just, well, died. Unbootable, disk utility spends over a day trying to fix the boot record. The Bootcamp windows partition is fritzy, but it at least mounts and periodically can be booted from. I bought an external usb hard drive, loaded SL onto that, and have my mac back up and running again, but no data to speak of. So based on numerous recommendations, I paid good money to purchase Disk Warrior 4. Nothing, just told me the Macintosh HD partition on the hard drive was damaged, but that bootcamp could still be read.
View 3 Replies
View Related
Apr 17, 2012
I have a G4 400 Mac desktop running plotter software that I need to put on a new drive in the same machine. The current drive is making clicking sounds at start up that probably indicate poor drive health. How do I clone the current drive to a new drive in a way that will allow me to just switch start up to the new healthy drive and keep running the plotter software as usual?
View 3 Replies
View Related
Jul 19, 2009
I have a Macbook (about a year and a half old) with 250 G hard drive which is partitioned in half. One half has Mac Os (leopard) and the other bootcamp partition is Windoze xp. I use both equally. I am planning to get a 500-750 G 2.5 inch hard drive and clone my entire hard drive to it so I will have more room (and also a good backup if the need ever arises). Since my drive has BOTH the Mac os and the bootcamp partiton with windoze on it, I need to clone them both over to the new drive. I believe superduper just clones the OS portion and I really don't want to re-install the windows stuff unless i have to! I read that winclone can clone the windoze partitian. SO THIS IS MY PLAN. I AM NOT SURE IF THIS WILL WORK. Is this right? Did I leave anything out? Is there a better way?
1. Get new larger drive and put in a separate powered enclosure
2. Connect to my macbook with usb connector
3. Use superduper to clone the Mac Os to the new drive.
4. Use Winclone to clone the bootcamp (windoze) partition to the new drive
5. Replace the old smaller drive with the new drive.
I think this would work, but am not sure how or when i have to partition the new drive to work with winclone. or does winclone do this automatically?
View 14 Replies
View Related
Oct 16, 2009
I have been a user of SuperDuper! for some time and understand the process of making a bootable clone of my startup drive. The other day, my bootable backup drive crashed. It was an Iomega that had been partitioned and worked fine as a bootable backup until the drive itself failed. The Iomega was a Firewire 400 drive.
When I bought a replacement, I bought a Western Digital FW 800/400, USB 2, eSata connection system. 1 TB. I partitioned it and created a bootable clone with the latest version of SuperDuper! The operation went smoothly until I tried to actually boot from the newly created clone. I could select the clone from the Startup Disk panel, but my Mac refuses to boot from it. It looks, then says, "Hmmm! I think I'll start up from the internal drive." I have another WD FW 400, USB 2.0 drive and it is bootable as well as a LaCie FW 400 that I can make bootable. Only this one drive that has no specific FW 400 port will not boot. I tried it as FW 800, no dice. I connected with the adapter cable to the FW 400 port, no joy.
I can return this WD drive for exchange. My question is should I expect the same results if I exchange it for another drive of the same type? Or is there a chance that a new drive of the same type will work?
PowerMac, dual G5 2 Ghz, OS X 10.4.11. It has a FW 800 port as well as FW 400.
View 13 Replies
View Related
May 27, 2010
Can Carbon Copy Cloner clone my internal drive and media drive on one bootable back up?
I believe time machine can but I like the idea of bootable back ups.
What I want is. 250GB internal + 500GB media CLONED to 1TB drive.
View 1 Replies
View Related
Oct 23, 2010
Anyone install Windows 7 via bootcamp on the 2010 Air? [URL]. Be interested in hearing your comments, on disc space used, boot times into windows, memory usage, and any other things worth mentioning, does bootcamp allow you to choose the partition size?
View 14 Replies
View Related
Nov 10, 2009
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
View 1 Replies
View Related
Oct 8, 2009
I am planning to buy a 500GB laptop harddrive, put it in an enclosure, and use CarbonCopyCloner to make a bootable clone of my Mac's internal 500GB Drive. This way, if there is a problem with my internal drive, I can just swap in the cloned drive and boot from that, never missing a step. However, I am wondering if this is a good strategy. What if something else fails on my mac like the motherboard - would I be able to boot my cloned drive on another mac?
View 3 Replies
View Related
Jun 1, 2012
Getting OCZ SSD to install on MacPro 08 in second optical bay. Must have User files on separate drive due to SSD will barely hold system. I figured I'd have to clone my primary boot drive to spare partition, boot from clone, setup it up with User in other location from SysPrefs > Users > control click current user > advanced options, restart then dump items form User in order to have the drive sized for the SSD. Once the intermmediate tranfer drive was set up, clone it to the SSD and use as boot.
I tested clone before actuall data transfers. Problem is after switching User file location from the booted clone, restarting, but re-booting looks like clean install. No preferences showed up, missing all but stock apps in dock, desktop image back to clean install, printer needing registration.Tried advanced options again to locate User on same original boot drive, restart, same thing. I did not remove User files yet from the cloned drive which I was booting. Just switched location.
Info:
Mac Pro, Mac OS X (10.7.2), MacPro '08, 2.8 Octo, 12GB, 5TB
View 2 Replies
View Related
Feb 10, 2012
How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one? I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.
Info:
iPod shuffle, Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 3, 2010
I have XP on a 1 TB HDD (only about 80 GB is used) and I want to move it to a 120 GB partition on an SSD and boot from there.
This would be trivial in OSX - just use carbon copy. But, I can't get it done using Acronis True Image 2010 or any other utility I've tried while in XP. Everything wants to clone the entire 1 TB and not simply the 80ish GB of files.
What should I use to accomplish my goal (or what must I do different with Acronis)?
View 6 Replies
View Related
Oct 12, 2010
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
View 6 Replies
View Related
Jan 3, 2010
I've done a byte to byte clone of my original 320GB bootcamp drive to a 750GB drive (connected via USB). So I remove the 320GB from bay 4 (MacPro) and slot in the 750GB into bay 4. I fire up my MacPro hit the Option key during power up and all I get is an option to select my Mac drive not my new 750GB Windows drive.
So I boot into OSX (since I have no other option) and I can see my "Untitled" Windows drive on my desktop. I can select it and browse it and I see all my Windows files. Also, under System Preferences - Startup Disk, I can see my "Windows on Untitled" listed.
View 14 Replies
View Related
Nov 23, 2010
I recently bought a Macbook Pro with a 200gb hard drive. Right now I am running bootcamp dual-booting OSX 10.6.5 and Windows7 100gb partitions each. I just got done configuring everything and then my friend offered me a 500gb hard drive for $50 so of course I had to buy it.
I am wondering if it is possible for me to clone the hard drive I currently have to the new 500gb hard drive and then extend the partition sizes so I don't have to go through and reinstall everything on the Windows side again.
View 2 Replies
View Related
Mar 28, 2009
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
View 1 Replies
View Related
Apr 18, 2010
Can I make a disk image of my current MB Pro (early 2008) and copy it to my new i7 MB Pro to retain all my docs and programs?
View 13 Replies
View Related
Dec 7, 2014
How do I safely "eject" my 2 TB Seagate external hard drive after backing my Mac Air onto it? I need to update my operating software, never had since I first got it. So I bought the Seagate HD, plugged it in and Time Machine just started running. Now I'd really like to be able to confirm that my entire machine backed up completely, and I think it is best to unplug the hard drive before upgrading the OS...is that right?
Info:
MacBook Air, Mac OS X (10.6.8)
View 1 Replies
View Related
Jul 23, 2010
I'm going to be swapping the 250 GB drive in my 2008 MBP Penryn (17) for a Seagate Momentus 500/7200rpm drive. There are two ways to go. One is to put the new drive in an enclosure and use SuperDuper or CCC to clone the main HD and then swap them. The other is to use Time Machine. That means installing the new drive blank, boot from the OS disk and format. Then go to the most recent TM state and restore. My available external HD is the FW800 Western Digital Studio. It has space for a partition big enough for the cloning. The case coming with the Seagate is the Other World Express USB2. I have good pdfs on the install procedure. Need to remember to print them, first.
View 8 Replies
View Related
Mar 26, 2012
My TM backup files are getting unnecessarily large so I would like to delete them and rescan my computer again. However, I don't want to risk deleting my TM backups and have the computer fail, so I wanted to copy the backups temporarily to a spare disk until the new backup had been completed successfully. So can the TM backups be moved just like any other file?
Info:
iMac, Mac OS X (10.6.8), FCE 4 + FCS 3
View 6 Replies
View Related
