OS X :: Can I Clone My 10.6 DVD Onto A Flash Drive?
Aug 20, 2010
i hear its possible to make a install emergency disk using a flash drive, i purchased a HP USB 16GB flashdrive v 165w, [URL]
i formated the drive as a Guid Partition, ignored preferences and all the stuff i could find online to see to it that i did it right but no go,
can anyone tell me if this drive is incompatible or which one i should exchange it for?
i tried cloning my original OSX Leopard DVD and i get errors when from both CCC and Super Duper,
View 8 Replies
ADVERTISEMENT
Nov 15, 2010
When I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
View 8 Replies
View Related
Sep 13, 2009
I just cloned my hard drive to a new and bigger drive. I did the OSX 10.5.8 update on the old western digital drive as a safety precaution, so that if it screwed up I would still have a good copy on my new Seagate barracuda. The update looks to have gone well and I will be waiting for a couple of trial days before backing the drive up again. My question is, when I clone the drive again(to the new seagate) how will that work? Should I erase the existing disk image(10.5.7) on that drive or will it overwrite the existing image with the new 10.5.8 one? This is the first time I have used carbon copy and don't really know all the in's and out's of it.
View 1 Replies
View Related
Aug 30, 2010
I have a Macbook running on snow leopard and I wanna upgrade my internal hard drive as it is currently too small. I downloaded Carbon Copy Cloner and cloned my entire hard drive to an EXTERNAL HARD DRIVE. Now, I have that new internal hard drive from wester digital. What do I do with it? replace the current internal hard drive with the new harddrive and then how do I get the data from the external hard drive with my cloned data to the fresh western digital? Do I boot first from external hard drive etc? I am not sure what to do now?when I was given the option which hard drive to clone (or which part of the hard drive to clone) there was also the option to clone "Install Disk". I don't need to clone that, right?
View 3 Replies
View Related
Sep 10, 2010
I had some problems with my 17" MacBook Pro and needed a replacement immediately. The Apple Store didn't have a 17" that met my requirements so I bought a 13" that I plan to give to my wife to replace her 13" non-pro.
So. I'm ordering a 17" over the Internet. When it arrives, I'd love to avoid ALL the configuration that I just went through to get this new 13" setup like my old 17". Is there any way to completely clone the drive in my 13" MBP completely and transfer the data to the new 17" MBP when it arrives?
View 6 Replies
View Related
Jul 14, 2009
I'm planning to replace my boot hard drive with a pair of RAID0ed SSDs. In order to familiarize myself with certain techniques I have build a software RAID0 from two 160 GB Maxtor SATA I hard disks. That went pretty much without problems. The two HDs are now sitting in position 1 and 2 in my Mac Pro.
The problem arises when I try to clone my boot drive onto the new RAID 0 drive. I was using disk utility and got an error message. Then I thought my fault was using disk utility from the HD which I wanted to clone and booted from the Leopard install disk. I then used disdk utility from that source to clone the HD boot drive to the RAID. Again I got the error.
What is going wrong? Do I have to approach this completely different?
View 8 Replies
View Related
Feb 23, 2010
I use carbon copy clone for my mac to copy boot drives, what do I use for the windows boot drives/partions to move to a different drive?
I've got Mac OSX on one drive and Windows 7 on another and will be installing a 160gb SSD drive for boot drive this weekend. I just want to copy the windows boot drive to the SSD drive partion I've created for windows.
View 2 Replies
View Related
Aug 10, 2009
trying to help my mat out with his laptop. Disk is small and full. Sadly I used to using Linux and Windows and not Mac Os. I have mounted the new drive in a caddy and conncted it. Now jsut need to kow a good way to copy the entire thing to the new drive and make it bootable.
IF it was Linux I would jsut dump the file system and in windows I would use symnatec but I have been told this isn't good for Mac's.
View 3 Replies
View Related
Apr 17, 2012
I have a G4 400 Mac desktop running plotter software that I need to put on a new drive in the same machine. The current drive is making clicking sounds at start up that probably indicate poor drive health. How do I clone the current drive to a new drive in a way that will allow me to just switch start up to the new healthy drive and keep running the plotter software as usual?
View 3 Replies
View Related
May 9, 2009
I'm thinking of upgrading my HDD on my new Mac Mini(2.0 GHz Core 2 Duo) and I'm wondering if this is possible. I would like to clone the old to the new without having to buy a USB or Firewire to SATA adapter. Would it be possible to disconnect the Super Drive(CD/DVD) and connect up the new drive, use Super Duper to clone, then replace the old with the new and reconnect the Super Drive?
I've searched the forums to see if anyone has tried this but I didn't find anything. I'm not even sure if there is a second SATA port that would work for a HDD. I know the Super Drive is a SATA because it's listed when I look at system info.
I've seen a lot of folks using USB or Firewire to do this so that's my backup plan but it would seem if I can get both drives connected this would be pretty straight forward.
View 2 Replies
View Related
Feb 9, 2010
I'm about to partition my WD passport into two section . It's 120 gigs and I'm going to use 100 gigs to back up all by media on my mac (pictures music video) and then I'd like to have a 20 gig section for extra flexible storage/transporting files from computer to computer, including PCs. So carbon copy cloner says the drive has to be formatted to HFS+ but in disc utility I don't see HFS+ under partition/format. also for the smaller partition what would be the best format for what I described above?
View 7 Replies
View Related
May 4, 2010
Gonna turn in my MBP later this week, because of a broken hard drive. What do I do before turning it in? Should I clone the drive (for backup) and then format and zero it out, to remove personal information?
View 5 Replies
View Related
Jul 3, 2010
I have XP on a 1 TB HDD (only about 80 GB is used) and I want to move it to a 120 GB partition on an SSD and boot from there.
This would be trivial in OSX - just use carbon copy. But, I can't get it done using Acronis True Image 2010 or any other utility I've tried while in XP. Everything wants to clone the entire 1 TB and not simply the 80ish GB of files.
What should I use to accomplish my goal (or what must I do different with Acronis)?
View 6 Replies
View Related
Jul 18, 2010
I what I would like to do is Clone the internal hard drive of my Mac Pro (I believe its a Mac Pro 1,1. 2.66 dual core Xeon), and use the clone in the current model Mac Pro Dual core 2.66 thats out now.
I need to have both machines running everything the same as both my studio's are in two different locations.
View 2 Replies
View Related
Jul 24, 2010
We have an old iMac G3 (very very old) it is teal and has a slot loading cd drive. It has a 233 mHz processor, 160 MB RAM and a 4 GB hard drive. We are planning on giving this computer away, but, before we erase the drive, I want to make an exact duplicate of it (perhaps as a disk image or on another physical drive.) The G3 has no firewire ports (only USB) but I can access it through the filesharing LAN. I tried using disk utility on another mac on the network to "create a new disk image from folder" and selecting the hard drive for the G3 on the network. It failed giving me a permissions error.
Any clue how to clone this drive? A disk image is a preferable method, but I am willing to spend money on an external drive if necessary.
I tried this and it didn't work: [URL}
View 3 Replies
View Related
Nov 13, 2009
I just purchased a MacBook Pro running the latest Leopard OS. I hooked up a Lacie external HD using FW 800 to backup a bootable system of my complete HD. I used Intego Personal Backup. All seemed to go well and the backup showed up on my startup screen in Preferences. Problem is it will not boot my sytem up. Tried twice and cleared my Lacie prior to backup. The Lacie also showed up as a startup disc when I did an Option startup. Never had such a problem with Tiger but I always used FW which the MacBook does not have. I am now trying Carbon Copy Cloner to make a backup but it is not complete. Does the MacBook using Leopard have any special requirements for a backup such as a particular cable cable to use?
View 2 Replies
View Related
Oct 16, 2009
I have been a user of SuperDuper! for some time and understand the process of making a bootable clone of my startup drive. The other day, my bootable backup drive crashed. It was an Iomega that had been partitioned and worked fine as a bootable backup until the drive itself failed. The Iomega was a Firewire 400 drive.
When I bought a replacement, I bought a Western Digital FW 800/400, USB 2, eSata connection system. 1 TB. I partitioned it and created a bootable clone with the latest version of SuperDuper! The operation went smoothly until I tried to actually boot from the newly created clone. I could select the clone from the Startup Disk panel, but my Mac refuses to boot from it. It looks, then says, "Hmmm! I think I'll start up from the internal drive." I have another WD FW 400, USB 2.0 drive and it is bootable as well as a LaCie FW 400 that I can make bootable. Only this one drive that has no specific FW 400 port will not boot. I tried it as FW 800, no dice. I connected with the adapter cable to the FW 400 port, no joy.
I can return this WD drive for exchange. My question is should I expect the same results if I exchange it for another drive of the same type? Or is there a chance that a new drive of the same type will work?
PowerMac, dual G5 2 Ghz, OS X 10.4.11. It has a FW 800 port as well as FW 400.
View 13 Replies
View Related
Oct 19, 2010
I bought an optibay clone and put it in my 2010 Macbook i5. I have an SSD residing in my standard hard drive bay (because of potential hibernate issues) and the 5400rpm Apple drive + optibay clone in the Superdrive bay. How do I sleep/spin down the 5400rpm drive ? Unmounting doesn't seem to help. Put disk to sleep option in preferences is selected, but it keeps spinning and spinning. What options do we have for sleeping/spinning down this drive within OSX ?
View 3 Replies
View Related
Nov 1, 2010
I'm drop shipping my 27" imac refurb to OWC for them to install the sdd, ram, etc. Someone here said OWC will clone the hd to the ssd and then the end user went back and did a clean install. Wouldn't it be better if OWC just installed the SSD, left it clean, and I did the install from the disks myself? I mean I assume it's a time issue why they would clone, not fresh install. I have plenty of time to do it. Is it not that simple? Is there something more fangled to it, or is it just running the disks and doing what they say?
View 4 Replies
View Related
Nov 23, 2010
I recently bought a Macbook Pro with a 200gb hard drive. Right now I am running bootcamp dual-booting OSX 10.6.5 and Windows7 100gb partitions each. I just got done configuring everything and then my friend offered me a 500gb hard drive for $50 so of course I had to buy it.
I am wondering if it is possible for me to clone the hard drive I currently have to the new 500gb hard drive and then extend the partition sizes so I don't have to go through and reinstall everything on the Windows side again.
View 2 Replies
View Related
Mar 10, 2009
Can I clone my hard drive in my iMac and stick it in my Mac mini and expect everything to work smoothly? Or are there specific drivers installed on the iMac drive?
View 2 Replies
View Related
Mar 28, 2009
I recently installed Boot Camp with Windows Vista. i partitioned the drive 50-50 and now i am running out of room on both partitions.
I am familiar with Ghost on the PC side but is there a software that will CLONE my Mac partition and Windows partition all in the same process? When i go to Disk Mangement in Vista, it recognizes four partitions. 1 for vista and the other 3 for Mac.
View 1 Replies
View Related
Jul 19, 2009
I have a Macbook (about a year and a half old) with 250 G hard drive which is partitioned in half. One half has Mac Os (leopard) and the other bootcamp partition is Windoze xp. I use both equally. I am planning to get a 500-750 G 2.5 inch hard drive and clone my entire hard drive to it so I will have more room (and also a good backup if the need ever arises). Since my drive has BOTH the Mac os and the bootcamp partiton with windoze on it, I need to clone them both over to the new drive. I believe superduper just clones the OS portion and I really don't want to re-install the windows stuff unless i have to! I read that winclone can clone the windoze partitian. SO THIS IS MY PLAN. I AM NOT SURE IF THIS WILL WORK. Is this right? Did I leave anything out? Is there a better way?
1. Get new larger drive and put in a separate powered enclosure
2. Connect to my macbook with usb connector
3. Use superduper to clone the Mac Os to the new drive.
4. Use Winclone to clone the bootcamp (windoze) partition to the new drive
5. Replace the old smaller drive with the new drive.
I think this would work, but am not sure how or when i have to partition the new drive to work with winclone. or does winclone do this automatically?
View 14 Replies
View Related
Jul 22, 2009
This is a tutorial for people looking to clone their internal hard drive and install it into their macbook (usually because you've upgraded to a larger hdd). I have also included an installation of windows vis a vis boot camp style. Ive been battling this for the past 3 days, so hopefully this tutorial will answer some questions and save you some time.
1. Firstly get your external drive (clone) ready. Go to applications---->utilities---->disk utility. Click on your external drive and then partition it. I used 2 partitions, one for mac (200 GB) and one for windows (40 GB). For now partition in GUID partition format (found in options). This is important. You can check whether it actually as in GUID at the end of the format when you click on the drive and on the bottom part of the screen it will give you all the drive information. (NOTE: if you have a standard windows installation you can have 1 partition at this stage and then later let boot camp create a partition for you. Boot camp will only format in FAT, so all windows using NTFS are out of luck)..............
View 2 Replies
View Related
Jan 3, 2010
I've done a byte to byte clone of my original 320GB bootcamp drive to a 750GB drive (connected via USB). So I remove the 320GB from bay 4 (MacPro) and slot in the 750GB into bay 4. I fire up my MacPro hit the Option key during power up and all I get is an option to select my Mac drive not my new 750GB Windows drive.
So I boot into OSX (since I have no other option) and I can see my "Untitled" Windows drive on my desktop. I can select it and browse it and I see all my Windows files. Also, under System Preferences - Startup Disk, I can see my "Windows on Untitled" listed.
View 14 Replies
View Related
Apr 18, 2010
Can I make a disk image of my current MB Pro (early 2008) and copy it to my new i7 MB Pro to retain all my docs and programs?
View 13 Replies
View Related
May 27, 2010
Can Carbon Copy Cloner clone my internal drive and media drive on one bootable back up?
I believe time machine can but I like the idea of bootable back ups.
What I want is. 250GB internal + 500GB media CLONED to 1TB drive.
View 1 Replies
View Related
Apr 12, 2012
I want to Create a Clone of my hard drive. What software is most recommended?
View 2 Replies
View Related
Jun 1, 2012
Getting OCZ SSD to install on MacPro 08 in second optical bay. Must have User files on separate drive due to SSD will barely hold system. I figured I'd have to clone my primary boot drive to spare partition, boot from clone, setup it up with User in other location from SysPrefs > Users > control click current user > advanced options, restart then dump items form User in order to have the drive sized for the SSD. Once the intermmediate tranfer drive was set up, clone it to the SSD and use as boot.
I tested clone before actuall data transfers. Problem is after switching User file location from the booted clone, restarting, but re-booting looks like clean install. No preferences showed up, missing all but stock apps in dock, desktop image back to clean install, printer needing registration.Tried advanced options again to locate User on same original boot drive, restart, same thing. I did not remove User files yet from the cloned drive which I was booting. Just switched location.
Info:
Mac Pro, Mac OS X (10.7.2), MacPro '08, 2.8 Octo, 12GB, 5TB
View 2 Replies
View Related
Oct 2, 2010
I recently had to wipe my entire hard drive. I made a clone of my Windows 7 partition before doing so, but am now unsure about how to restore it. Is it possible to restore without first installing Win 7 from scratch, i.e., is there any chance I could partition the drive using the Boot Camp utility then simply copy the entire file system over?
View 1 Replies
View Related
