Recently my internet has been slow, and even though I reboot my iStat Pro reports that I'm always downloading and uploading stuff (the speeds are like 100 kilobytes/sec) even though I have no applications running (I only have Finder in my Dock). How can I see what is using up my bandwidth?
View 9 Replies
Here is the situation. my family has someone staying with them our house who is basically addicted to internet pornography. They will be here for a while as they have hit a rough patch in their life and we are trying to help them out.
We already had a block set up with openDNS to effectively block all web sites through our router (apple time capsule) but that doesn't do anything to block p2p file sharing and our guest has figured this out. I discovered this because they are not too computer literate and all of their downloads from limewire and frostwire ended up showing up in their itunes shared library.
I am looking for some advice from some pro network admins / elite type users.
I have some specific problems I am trying to address and could use a pointer in the right direction in terms of what software to get.
a) I'm looking for any software suite / program, MAC or PC, which can enable me to detect TRAFFIC on MY OWN network, and possibly correlate that traffic with known port numbers to create a graph / picture / etc of WHAT KIND of traffic a specific IP address / interface is transacting.
The purpose of this is to attempt to pinpoint how much torrenting / limewire / etc is going on on my network, and from what computers.
b) Any advice on any wireless router brand / model that enables IP / computer based bandwidth throttling such that I can clamp down on people who leech and drive my ping times through the roof.
This is a home network, college residence with approx 10 different users on the network. I have full control over the cable modem and the router. It is a consumer model (netgear) with limited configuration options, but very good wireless reception.
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
I want to view the Network Connection Log on my MacBook. I know the Console.app is the app to view the system log but where is exactly showing when I connect to the network by using the Wi-Fi networking or the Ethernet.
View 1 Replies View RelatedI'm connected via Airport to my company's wireless network. Last week I was able to connect to this network via my Macbook. Went home this weekend, come back and now I can connect and browse the internet, but I can't view the "Shared" folder with other people's public folders and shared files.
View 6 Replies View RelatedI took my Macbook to the Computer lab, and they couldn't figure out what the problem is. I can access the school's website at home, or on any other network, but not on my connection in my dorm. I can go to any site, except the school's.
View 1 Replies View RelatedI'm running Parallels with a Ubuntu VM to test my new NAS computer, but I can't seem to view the Ubuntu services with other computers on my network. Is there a setting or something that I can change that enables Parallels to share services across the network? Right now I'm limited to seeing services from Ubuntu with OS X on my MacBook running the VM.
View 1 Replies View RelatedJust found identified that for me to fix an issue with iTunes multiple speakers I need to open two UDP ports (6001 and 6002) on my firewall. What does this mean and could this cause a problem with the security of my network?
Basically, whats the impact on me if I open them?
Is there anyway to encrypt incoming traffic so people wouldn't know what I am downloading? I have an airport extreme base station and am wondering if it is possible to do it through that. If not, what would be the best software way to do this? Now, since illegally downloading is bad
View 2 Replies View RelatedI was asking some time ago telling about the traffic that is coming in, dont know where it originate from. But now its coming with 800KB/s, and its KB not kb. I'm connected directly to internet, no firewall, static IP. I can see in little snitch some local computers. Wonder if I'm safe with OSX ? kernel_task process was so high, it attracted my attention
View 1 Replies View RelatedSystem: uMB 2.4/4GB Ram, October 2008, running 10.6. In the past couple days, I've all-of-a-sudden noticed that I'm receiving incoming network traffic; sometimes it's 300-400kbps, sometimes it's almost 1Mbps. It'll occasionally stop for a period of a few seconds to a minute, then pick up again. Disconnecting the computer from the network will stop it (obv), but it picks right up immediately upon reconnecting.
No programs are running that would seem to cause this behavior. Nothing is being downloaded (I mostly do that on a separate machine anyways) and nothing is running when this begins that would lean me towards a problem. Switching from a wired connection to a wireless connection does stop the download completely, which lends me to think that this is most likely an attack on that IP, though I can't find a way to be sure or to even look further on that idea.
What is the process used to direct certain IP addresses or a range of IP addresses to the second ethernet connection on a Mac Pro? I have a set of Mac Pros that use the first connection for internet access and corporate server connections using Samba. But the second ethernet connection is used for a lan between the Mac Pros and printers. It currently works but it take a bit for the "connect to servers" dialog to connect to a Mac Pro on the lan because I think it is searching Connection 1 first which has hundreds of Windows servers attached to it. And it takes several minutes to connect if our service has an interruption on Connection 1. All of the Mac Pros and printers are set up to use a manual IP address (192.168...) The Mac Pro workstations use Snow Leopard and we have a Mac Pro Server running Lion Server that we use to conntrol a network RAID.
Info:
Mac Pro, Mac OS X (10.6.5)
I'm using Tunnelblick to a OVPN server. I noticed Tunnelblick doesn't have an option to "send all traffic over VPN" like say Viscosity does, I would use Viscosity but I'm on a 64 bit kernel and Viscosity has no support for that, I know there are several guides but they don't work. So simply, how do I know if Tunnelblick is sending all traffic over VPN or not?
View 1 Replies View RelatedEspecially since it is open source, it surely shouldn't be too difficult to modify the traffic lights to be vertical in Mozilla Firefox like they are in iTunes 10. I've seen that you can change the iTunes 10 traffic lights to be horizontal. How would I do the opposite in Firefox?
View 3 Replies View RelatedI have a 20inch imac (bought in summer 2007). I am just getting into using it as my primary computer. I was playing around in order to learn more and I found something through Activity Monitor that does not make sense to me.
In the Network Activity tab, I see "Data received:" and "Data sent:" sections. As I browse the web, these numbers change of course, but it seems that the Data received quickly reaches hundreds of megabytes! Right now, Data received: is 540MB and Data sent: is 280MB (after a reboot earlier in the day). I am not using the iMac as a server or anything and I have never seen a Windows PC sending out so many packets in the course of browsing the web. Is this in line with others' experience? Should I be concerned about a spyware program on my iMac?
I need to block outgoing traffic on specific ports. Is there anything default in OS X to do this? If not, what application could I use? I'd prefer to use the OS, if it has an ability to do this.
View 4 Replies View RelatedI'm planning to connect an external hard disk to an AEBS and open the right ports to allow Internet access. I plan on distributing the HDs IP address and password among some friends for a collaborative project. Is there any way for me to monitor the inbound/outbound traffic of such a situation? Perhaps even log which IP addresses do what, so I have a history of each user's actions? This sounds like something akin to an incredibly stripped down version of the Admin Tool suite available on OS X Server.
View 1 Replies View RelatedI have been having problems with uploads from my computer: is there a program that will help me monitor traffic and also pinpoint where all my traffic is going?
View 1 Replies View RelatedI have two .dat files that each have the VLC 'traffic cone' symbol on their icons. How can I get them to display without it?
Info:
iMac (Flat Panel), Mac OS X (10.6.8), iMac G4 15"/800MHz/1GB and PowerBook G4 17"/1.33 MHz/1GB
Love it or hate it, I couldn't stand the all-gray iTunes and the vertical traffic lights. So I dropped a little script in the terminal and installed a modification to bring colour back to my icons. Now that iTunes 10.1 is out, does anyone have any experience with it breaking such modifications? I can't quite remember what it was I changed or I would experiment for myself. Unfortunately I'm tech savvy enough for basic trouble shooting and following explicit directions but not enough to know all the components of iTunes. I think I replaced a resource file of some kind.
View 6 Replies View RelatedI would like to view as Columns but it is grayed out in Finder view options. Why is this? And is there a way to fix it?Â
Info:
iMac, Mac OS X (10.6.8)
Earlier tonight I opened iCal, only to find that none of my calendars were there. it was completely empty. However, when I changed the view from "Week" to "Month" all of my events were listed (in the proper color) on the appropriate day, but I still had no list of calendars on the left. Subsequent changes between "Day" "Week" and "Month" view continued to display the events properly, but nothing showed up in the calendar menu on the left.
I repaired permissions same thing happened.I trashed com.apple.ical pref (forgot the exact filename)�same behavior. I use .mac to sync between computers, and I use Missing Sync to sync to a Palm T|X.
I have an older MBP (2.2Ghz, 2GB RAM, 120GB HD) and am having problems with PDF files. Well, I guess it would be better described as annoyances with PDF files. I use Adobe Reader and the lag when scrolling is unbearable. Does anyone know of a way to fix this? Can anyone suggest alternate programs that may remedy my problem.
View 11 Replies View Relateditunes 10.6 after upgrade when i select movies grid view it crashes every time works fine in all other view modes
View 3 Replies View RelatedI have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
I noticed that finder is not displaying all files when I look at folders with lots of files in "icon view" mode but they do show up in "list view" Same thing happened with the computer at work. I'm using OS X Leopard on both.
View 1 Replies View RelatedSo, like a complete idiot i downloaded a torrent file with a few thousand font files. i installed them all and it has bogged down my OS and taken over programs like Safari, firefox and entourage (which i use for email). when i change the font in the preference menu in the respective program it will change the size but not the actual font style. another strange thing is that safari will not load pictures now either.
i want to just wipe the hdd but i do not have a disc because i bought it used. i can take it back to the guy i got it from as he refurbishes macs but i was wondering if i could avoid the trip if any one has a tip or two for me.
I just ordered a new Macbook Pro (with Retina Display).It's my first MBP since 2007.I'm super excited about it, minus one glaring issue. My harddrive is the baseline 251 GB SSD. I've hardly used the thing besides loading some music and movies onto it. However, when I look at the'About this Mac' window, it says I'm using 51.89GB in Other.Compared to only 11GB in Movies and 2GB in Audio.It's hard for me to believe that the operating system takes up a whopping 50GB..How can I account for this Other section?
Info:
MacBook Pro (Retina, Mid 2012), Mac OS X (10.7.4), 251 GB SSD
my Macbook that is in my signature is currently saying that it will take ten hours to charge (See Pic) after charging for the first time in two weeks after coming back from a camp and I'm not sure what to do.
View 2 Replies View Related
