Especially since it is open source, it surely shouldn't be too difficult to modify the traffic lights to be vertical in Mozilla Firefox like they are in iTunes 10. I've seen that you can change the iTunes 10 traffic lights to be horizontal. How would I do the opposite in Firefox?
View 3 RepliesLove it or hate it, I couldn't stand the all-gray iTunes and the vertical traffic lights. So I dropped a little script in the terminal and installed a modification to bring colour back to my icons. Now that iTunes 10.1 is out, does anyone have any experience with it breaking such modifications? I can't quite remember what it was I changed or I would experiment for myself. Unfortunately I'm tech savvy enough for basic trouble shooting and following explicit directions but not enough to know all the components of iTunes. I think I replaced a resource file of some kind.
View 6 Replies View RelatedIs there a reason why the keyboard short cuts for volume is adjusted with the VERTICAL arrows knowing that the volume bar is HORIZONTAL and that the next song shortcut is with HORIZONTAL arrows knowing that the song are listed VERTICALLY?
Although I've been using using iTunes since the very beginning, I just cannot get used to this reverse logic...I often use it "live" for parties and so scared to switch song instead of volume that I keep using the trackpad instead!
Info:
MacBook Pro, Mac OS X (10.6.8)
Just found identified that for me to fix an issue with iTunes multiple speakers I need to open two UDP ports (6001 and 6002) on my firewall. What does this mean and could this cause a problem with the security of my network?
Basically, whats the impact on me if I open them?
From a certain moment now i could not surf on some web sites as Facebook (really long to open, then html text on the left,[URL]etc) also when i want to update my apps on iTunes, he sais cannot connect to iTunes store, weired. I already empty the cache, and cookies on Firefox, dosent do anything, oh! And as same for chrome, safari and internet explorer. It seems that the big sites are blocked.I work on iMac g5 os lion 10.7.2, processor 3.06 GHz, Firefox 10.0, iTunes 10.5.3 no firewall
Info:
iOS 5.0.1
Is there anyway to encrypt incoming traffic so people wouldn't know what I am downloading? I have an airport extreme base station and am wondering if it is possible to do it through that. If not, what would be the best software way to do this? Now, since illegally downloading is bad
View 2 Replies View RelatedI was asking some time ago telling about the traffic that is coming in, dont know where it originate from. But now its coming with 800KB/s, and its KB not kb. I'm connected directly to internet, no firewall, static IP. I can see in little snitch some local computers. Wonder if I'm safe with OSX ? kernel_task process was so high, it attracted my attention
View 1 Replies View RelatedSystem: uMB 2.4/4GB Ram, October 2008, running 10.6. In the past couple days, I've all-of-a-sudden noticed that I'm receiving incoming network traffic; sometimes it's 300-400kbps, sometimes it's almost 1Mbps. It'll occasionally stop for a period of a few seconds to a minute, then pick up again. Disconnecting the computer from the network will stop it (obv), but it picks right up immediately upon reconnecting.
No programs are running that would seem to cause this behavior. Nothing is being downloaded (I mostly do that on a separate machine anyways) and nothing is running when this begins that would lean me towards a problem. Switching from a wired connection to a wireless connection does stop the download completely, which lends me to think that this is most likely an attack on that IP, though I can't find a way to be sure or to even look further on that idea.
What is the process used to direct certain IP addresses or a range of IP addresses to the second ethernet connection on a Mac Pro? I have a set of Mac Pros that use the first connection for internet access and corporate server connections using Samba. But the second ethernet connection is used for a lan between the Mac Pros and printers. It currently works but it take a bit for the "connect to servers" dialog to connect to a Mac Pro on the lan because I think it is searching Connection 1 first which has hundreds of Windows servers attached to it. And it takes several minutes to connect if our service has an interruption on Connection 1. All of the Mac Pros and printers are set up to use a manual IP address (192.168...) The Mac Pro workstations use Snow Leopard and we have a Mac Pro Server running Lion Server that we use to conntrol a network RAID.
Info:
Mac Pro, Mac OS X (10.6.5)
I'm using Tunnelblick to a OVPN server. I noticed Tunnelblick doesn't have an option to "send all traffic over VPN" like say Viscosity does, I would use Viscosity but I'm on a 64 bit kernel and Viscosity has no support for that, I know there are several guides but they don't work. So simply, how do I know if Tunnelblick is sending all traffic over VPN or not?
View 1 Replies View RelatedHere is the situation. my family has someone staying with them our house who is basically addicted to internet pornography. They will be here for a while as they have hit a rough patch in their life and we are trying to help them out.
We already had a block set up with openDNS to effectively block all web sites through our router (apple time capsule) but that doesn't do anything to block p2p file sharing and our guest has figured this out. I discovered this because they are not too computer literate and all of their downloads from limewire and frostwire ended up showing up in their itunes shared library.
I have a 20inch imac (bought in summer 2007). I am just getting into using it as my primary computer. I was playing around in order to learn more and I found something through Activity Monitor that does not make sense to me.
In the Network Activity tab, I see "Data received:" and "Data sent:" sections. As I browse the web, these numbers change of course, but it seems that the Data received quickly reaches hundreds of megabytes! Right now, Data received: is 540MB and Data sent: is 280MB (after a reboot earlier in the day). I am not using the iMac as a server or anything and I have never seen a Windows PC sending out so many packets in the course of browsing the web. Is this in line with others' experience? Should I be concerned about a spyware program on my iMac?
Recently my internet has been slow, and even though I reboot my iStat Pro reports that I'm always downloading and uploading stuff (the speeds are like 100 kilobytes/sec) even though I have no applications running (I only have Finder in my Dock). How can I see what is using up my bandwidth?
View 9 Replies View RelatedI am looking for some advice from some pro network admins / elite type users.
I have some specific problems I am trying to address and could use a pointer in the right direction in terms of what software to get.
a) I'm looking for any software suite / program, MAC or PC, which can enable me to detect TRAFFIC on MY OWN network, and possibly correlate that traffic with known port numbers to create a graph / picture / etc of WHAT KIND of traffic a specific IP address / interface is transacting.
The purpose of this is to attempt to pinpoint how much torrenting / limewire / etc is going on on my network, and from what computers.
b) Any advice on any wireless router brand / model that enables IP / computer based bandwidth throttling such that I can clamp down on people who leech and drive my ping times through the roof.
This is a home network, college residence with approx 10 different users on the network. I have full control over the cable modem and the router. It is a consumer model (netgear) with limited configuration options, but very good wireless reception.
I need to block outgoing traffic on specific ports. Is there anything default in OS X to do this? If not, what application could I use? I'd prefer to use the OS, if it has an ability to do this.
View 4 Replies View RelatedI'm planning to connect an external hard disk to an AEBS and open the right ports to allow Internet access. I plan on distributing the HDs IP address and password among some friends for a collaborative project. Is there any way for me to monitor the inbound/outbound traffic of such a situation? Perhaps even log which IP addresses do what, so I have a history of each user's actions? This sounds like something akin to an incredibly stripped down version of the Admin Tool suite available on OS X Server.
View 1 Replies View RelatedI have been having problems with uploads from my computer: is there a program that will help me monitor traffic and also pinpoint where all my traffic is going?
View 1 Replies View RelatedI have two .dat files that each have the VLC 'traffic cone' symbol on their icons. How can I get them to display without it?
Info:
iMac (Flat Panel), Mac OS X (10.6.8), iMac G4 15"/800MHz/1GB and PowerBook G4 17"/1.33 MHz/1GB
My new 13 inch MacBook Pro keeps on freezing. I'm only on iTunes and FireFox. Anybody else have these problem?.
View 2 Replies View Relatedi know safari is default cuz its apple and all.. but what do you guys have as a separate option:
Google Chrome
Firefox 3.5
Firefox 4 Beta
Opera
Just safari
just curious.. wanting to put a browser but not too sure. (on my desktop PC, i have firefox 4), but i would like to know
I've run into a problem. My macbook pro running 10.6.4 can no longer connect to the internet with any app but ichat. It is bizarre. I have restarted my computer, released my IP addresses, turned ip6 on and off... nothing works.
View 1 Replies View RelatedI have the white MacBook, I've had it about 2 years now. I was wondering if maybe I have too much on my hard drive and that is why my most commonly used applications have suddenly begun to close mid-use. I've never had this problem before and have recently uploaded quite a bit of music/photos to my MacBook, so it seems to be the only logical explanation for it? Or, I don't think I could've gotten a virus because 1. I'm very cautious about the files I download and 2. I don't think Macs are susceptible to most viruses. I could be wrong, though.
Nonetheless, does anyone know of any solution for this?
So here's something that's been on my mind for a while, but never figured it was worth while asking...anybody. But with Snow Leopard coming out tomorrow which feature Expose in the dock now thought i'd ask. I'm sure to some degree this question boils over as your personal productivity preference because i'm wondering what sizes your windows are normally at. For example, say you use Safari or Firefox; is that window taking up the whole screen? If so, why? Ever really think about it? Do you have it full screen cause you wanna surf the web and do your research or procrastinate at the biggest possible size available ...or.... is your Safari/Firefox window not fully screened, simply because you normally have more than just one Firefox or Safari window open, and it makes it easier to navigate multiple windows when they ain't taking up the whole screen?
For example, iTunes for me is possibly the only window I ever fully enjoy being full screen. I love cover flow so have a "space" (3) devoted to iTunes in full screen. In Space 2 (of 6) I have FireFox in full screen but many time throughout the day hate that it's full screen cause I easily need to navigate back to something else, such as the finder or w/e. Anyways, i'm really wondering what others do here, I think it'll be interesting to hear what's up. With SL coming out tomorrow i'm sure Expose in the dock will help big time, but nevertheless.
I am very want to buy one but I seem doesn't had keyboard backlight.
View 2 Replies View RelatedI haven't made many posts here, but I know this is an excellent site. I have a Power Mac G5, Dual 1.8 GHz PPC (June 2004). I found some (4x1GB sticks) PC3200 Samsung Ram for it. I put it in the computer, turned it on, and the power light flashed twice, waited a while, then flashed twice again and kept cycling. After looking around a while I saw that that probably means it is incompatible ram (?).
The ram that I have has an "R" after PC3200. Is this a problem? Anyways, back to my story, So I put the ram back in that I originally had running and it does the same thing (with the flashing lights). I had to go at this point so I said f-it and I will work on the problem on Sunday or Monday. It is just bothering me why it is not working. Can anyone provide any insight? It may just be that the ram isn't properly seated. I really hope that is the problem,
PS: Information that was on the Samsung Ram:
PC3200R-30331-C3 1GB DDR PC3200 CL3 ECC
KR. M312l2920CZ3-CC. 0616
My old PPC G5 has the front LED (white) flahing three times - I've looked at the various notes about the poddibility of this being a RAM issue, I've checked out the slots, cleaned them and the RAM sticks too, all to no effect. After being switched on for a while, the fans come on and I have a Hovercraft under my desk!
Info:
PowerMac, Mac OS X (10.5.8), To be supplied
the Firefox addons on Mozilla's website work on OSX when using Firefox? I just wanted to make sure since I like using all of the apps on my firefox configuration and was thinking about buying a mac. I know a lot of 3rd party apps that aren't specifically made for Mac at times will not work
View 1 Replies View RelatedI am using a 3D scene using two lights.
The backgrounds is a soft green/yellow tone.
What ever I do with the lights, they create banding in the animation and the result is that it lookes like bad compression.
Information:
G5
Mac OS X (10.5.5)
2x3GHz Quad-Core Intel 10GB memory
My roommate spilled wd 40 on my keyboard and now some of the lights don't work. If I want to fix this issue, what do I have to replace. I searched threads and some people say just the keyboard and some people say keyboard and upper case. So what exactly do I need to replace?
View 10 Replies View RelatedI will be in a dark room and the light iwll only come on once I adjust them. I have the setting checked in my system preferences.
View 3 Replies View Related