MacBook Pro :: HDD Replaced Now Freezing
May 1, 2012
I have a macbook pro 13 inch purchased in 2009. My HDD died so I took it to an Apple dealer and they replaced it and upgraded me to 10.6.8, when I took it home I found that some of the applications I had received for free were now missing, and after a few days I was having the same problems with my HDD (folder with ? mark appearing) so I took it back. They told me that I had a virus? They then gave me the apps that had been missing and upgraded me again to 10.7.3 however it is still freezing regardless of whether I am on the internet so its not my connection. I also went to open itunes and it told me it could not find a folder and to choose a location. When I chose Music - itunes - it states I can't and to choose another folder.
Info:MacBookPro, Mac OS X (10.7.3)
View 1 Replies
ADVERTISEMENT
Sep 10, 2010
I have a 2009 Macbook Pro, and Apple advertises up to 80% battery capacity up to 1,000 charges. My MBP is down to 75% health after a little more than 500 charges.Would I have any problem getting Apple to swap the battery out for me free of charge?
View 5 Replies
View Related
Jan 2, 2011
After I replace my super drive with Hitachi 500G 2.5mm HDD, I can not boot except I hold the option key and manually selecting OS X to boot. I think if I am able to reset HDD as 1st boot device as HDD like modifing BIOS in windows machine, it might help, how I don't know how.
View 1 Replies
View Related
Jan 9, 2009
I have a 1.8 core duo macbook, which previously had a CD-RW drive that stopped reading audio CDs, so I had it replaced under my warranty at John Lewis. It was replaced with a MATSHITA DVD-R UJ-857 and I got it back yesterday, so I was pretty happy that I can now burn DVDs. Only problem is, I just found out that I can't burn CDs with this new drive!
View 5 Replies
View Related
Jun 25, 2009
I just got my battery replaced and after a full charge both istat and mac osx shows that there is only one cycle available. I remember that my previous battery used to have at least 60 cycles. Is 1 cycle normal for new batteries or?
View 3 Replies
View Related
Sep 11, 2009
how the graphics cards in the MBPs will evolve over the next 6 - 12 months? Is there a sense that the 9400M will be replaced with something better?
View 15 Replies
View Related
Dec 27, 2009
I just got my MacBook pro returned 4 days ago after the hard drive was replaced because the brightness was on minimum and had to be reboot 15 times so it could be changed. I asked apple to replace my battery because it had 1 minute battery life and it had 47 cycles but they didn't. My mac didn't have enough power to start speakers so I rebooted but my mac went into sleep mode and wouldn't come out. I had to force shut down. I tried turning it on but it wouldn't turn on, I tried taking out battery etc and pressed power button 5 secs but nothing changed.
I live 100 miles away from apple repair. I wrote this on my iPod touch. I took it to apple repair and it turned on. I had been using a 65 watt charging cable for a MacBook, I need a 85 watt charging cable. It was 100 miles away and has been posted to me today. apple told me that a MacBook pro requires 80 watt charging cable, and 65 watt can be bad for the mac and will only work if the battery isn't dead. my battery was dead when I tried to turn it on.
View 16 Replies
View Related
Jul 16, 2010
Well my MBP seems to have been running a tad bit warm. Took it apart and this is why. I've read all over the internet that Apple always seems to do a crappy job with applying way too much thermal paste to their processors/GPUs.
Pictures below confirms this and now my MBP is running 10-15*F cooler. Fans stays at a constant 1000RPMs. I haven't used SMC Fan Control yet to increase them as now I don't have to but maybe I will increase 500RPMs or so but I like how quiet it is now .
Cleaned them off with q-tips and 90% alcohol and applied Arctic Silver 5 thermal compound.
Yuck what a crappy and sloppy job. I removed chunks of the old stuff.
All clean now. Look how shiny them chips are
View 21 Replies
View Related
Feb 27, 2012
I'm working on a Macbook pro 15 A1278 for a friend. They were given the computer by someone who didn't want it. My friend did not have the password to get into the machine and no original system disc. I thought this was going to be an easy case of erase-and-install. So I attempted to boot from my own Snow Leopard DVD, then I started getting three beep errors. Now I can't get as far as the password screen any more. Computer starts with normal chimes, then when it gets to the grey screen with the Apple, I get the "three beeps". Bought new ram, put it in, reseated it a bunch of times, still three beeps every time.Attempting to restart using the system DVD by holding the C key, same problem. DVD spins up but then three beeps. Fired the machine up as a target disk and ran disk utility via remote control from another machine, we''ll call that one "machine B". Hard drive checks out with no errors and is formatted in Extended Journaled. Did a clean system install from machine B (while still in target disk mode). System install was a success and was able to restart machine B successfully from the hard drive of the faulty machine.Â
Info:
MacBook Pro, Mac OS X (10.6.3)
View 6 Replies
View Related
Mar 11, 2012
I recently upgraded my HDD to a bigger one (160G to 500G). The old HDD still has all of my data which I would like to migrate to the new drive. I purchased a device that a tech at a computer store recommended but when I plug in the old HDD (using this device) to my Macbook pro the HDD doesn't show up in Finder! What I need to do to get my data back?
View 5 Replies
View Related
Apr 17, 2012
Mac book pro slipped off bed and broke power plug but also broke power port. Can power port be replaced?
Info:
MacBook Pro
View 3 Replies
View Related
Apr 22, 2012
The last two weeks we have noticed that the charger port is very sensitive, I know our battery needs to be replaced, now we think the port where you plug in the charger needs to be replaced as well. You have to put a lot of pressure on the charger when its plugged in to hold a charge. if not that battery dies within seconds even if it says its at 100%. we have a early 2008 model for the macbook. any idea what we can do? we have elastics holding the charger in place and sometimes thats not even working. (using elastics to push the charger into the port )
Info:
MacBook, Mac OS X (10.7.3)
View 2 Replies
View Related
May 8, 2012
I am replacing a MacBook Pro HD with a Seagate Momentus 500gb HD. The Apple one is reconized but semi corrupted, the Seagate one isn't even reconized. The onl difference between the two that I notice is the side slot on the far right of the Seasgate. Do I need a differenct type of replacement HD or could it be the HD cord? the one on the left is the Seagate
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
View 3 Replies
View Related
May 9, 2012
My battery keeps on acting up and needs to be replaced. I don't have applecare. I was wondering what the price would be for me to get a new battery.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 3 Replies
View Related
Mar 3, 2009
After bringing them both into the genius bar and setting them side by side, the genius agreed that there were faint lines visible on light backgrounds, and is having it sent off to have the whole top housing replaced. Here's to hoping that it works out..UPDATE: so despite the fact that I have some authorization from the genius bar to have my clamshell assembly replaced, I just checked the status of my order and it says "no issues detected." I'm assuming that apple is within their right to do this, but the paperwork clearly states that the lines are visible in store to multiple geniuses.
View 16 Replies
View Related
Jul 20, 2009
I am selling my MacBook as I upgraded to a MBP. I was cleaning the screen to pretty it up and realized that the screen was chipped or scratched. I am not sure what to do. It is going to be anywhere from $99-$200 to fix it. Do you think it is worth it? Below are the general specs of the MB:
CPU: Intel Core 2 Duo
Model or Type: MacBook w/ APPLECARE!!
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version: 1.31f0
Serial Number: W88114Y20P1
Sudden Motion Sensor:
State: Enabled
Now, I am seeing similar MBs go for $800-$850
I have attached two pictures. Please let me know if you feel it is worth the extra time and investment to get the screen fixed.
full screen
super close up
So, I ask, is it worth the extra money to get it fixed?
Thanks in advance!
View 1 Replies
View Related
Jul 24, 2009
I had the LCD replaced because the whole upper half was shifted on one side closer than the other for some reason and when I closed the lid, it was not only not aligned properly but it was chewing up the plastic edge at the bottom of the LCD.
Anyways, took it to the Apple store in Vancouver here and it still is a bit off. Took it to the tech and they say that is the way it is and there isn't too much they can do. That is total BS!! I have to get this realigned even if it means Apple will get their tech to replace my MBP. Just got it in March 09.
Anyhow, I noticed that the LCD replaced has colors NOT quite as rich or as deep as before. Anybody know how to check their LCD for this? I'm going to have to get them to replace the LCD again! I know Apple doesn't have any quality control when it comes to having the LCD replaced but when the computer is $3000, you would think they would take the care to be a little bit more stringent with their replacement parts/products.
View 2 Replies
View Related
Oct 27, 2009
Been searching but nothing specifically addressing this issue. I can put in DVD's and music cd's but a blank CD-R is just not recognized. Just had this superdrive replaced 6 weeks ago.
View 2 Replies
View Related
Mar 15, 2010
I'm just curious to see how many people here have even had it replaced at least once.
View 17 Replies
View Related
Jul 8, 2010
Just replaced the HDD on my new MBP 13" and am trying to use the restore DVD that came with the MBP to reinstall Snow Leopard. However, when I hold ALT/OPTION on startup and get the option to boot from the MacOS Install DVD, the DVD sounds like it is spinning but I just see the Apple logo and spinning wheel! It stays in this state!
View 15 Replies
View Related
Feb 9, 2012
Last week the hard drive crashed (or so I assumed) on my late 2009 13" Mac-book Pro.I was getting the blinking folder icon at startup. After trying to boot in safe mode and several other start-up options, I booted from an OSX install disk and found that the drive wasn't appearing in the Disk Utility - this, and the fact that I had been running it at very high capacity for far too long is what led me to assume it was utterly dead.So I ordered a new drive, a WD Scorpio Blue 500GB, and installed it today. Again booting from the OSX install disk, I went to the disk utility (thinking I would format the drive before installing the OS), but new drive wasn't there either.Assuming I installed the new drive correctly (it was pretty straightforward), this is leading me to assume that I was wrong with my diagnosis.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 23, 2012
Ever since I replaced the RAM in my mid-2009 MacBook Pro from 2gb to 8gb, My Mac randomly locks down and displays: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." Here is a picture of the screen when this problem happened on start up:
Info:
MacBook Pro, Mac OS X (10.7.3), New RAM
View 14 Replies
View Related
May 22, 2012
I bought a second hand Mac Book Pro A1150 model. It did not have an optical drive so I bought one, installed it and now my Mac Book will not boot up. When I take the drive out the Mac Book boots up fine. I was told that the optical drive although used was tested and work when it was shipped out. Is it common for a possible defective optical drive to casue a Mac Book pr to not boot up or does this sound like an issue with the optical drive cable, or possibly the logic board?
Info:
MacBook Pro, MAc Book Pro A1150
View 5 Replies
View Related
Nov 2, 2010
Hello everyone! Hope I can get some great advice re: Apple Care and my MBP. Here are the basics.
Bought 2010 MBP brand new in June from Apple's site and also have Apple Care extended warranty. Since the beginning it's been plagued with kernel panics, gray screen of death, and lots of buggy behavior and app crashes. Have made two Genius Bar visits.
First they said it was a RAM problem and replaced that. MBP still didn't work right. Next they said it was a logic board problem and replaced that. MBP still doesn't work right! I've called customer support, they said to do OSX re-install and gave me a case ID #. Did that, MBP still has all the problems listed above.
I have my third Genius Bar appointment this week. At this point I think most people would conclude I've got a lemon MBP. So, my question is, what are some tips or recommendations on what I need to say/do to get Apple to replace with a new MBP? I'm tired of going back for repairs to this already frankenstein machine and believe that if they could have fixed it by now, it would be working fine. Any thoughts? Thanks!
View 9 Replies
View Related
Apr 2, 2009
Today I accidently moved a project I'd been working on from my flash drive to my desktop, I already had a folder of the same name on my desktop and when I merged it, it overwrote the old file and my project is totally gone. Is there any way of undoing this or recovering my work.
View 2 Replies
View Related
Jun 12, 2009
I took my Late 2007 Macbook to the Apple Store to have the screen checked out (there were random burn marks on the screen). They sent it out for repair and when I got it back I noticed the screen was awesomely bright!
Is there anyway to see if they used an LED backlight screen as the replacement? System profiler didn't tell me much.
View 3 Replies
View Related
Jul 22, 2009
iBook, G4 12", 1.2 GHz
This old unit needed a bigger hard drive, so a friend gave me a Hitachi 60 GB drive he didn't need and I installed it. He told me that it was formatted for MS-DOS and that I would need to reformat it for Mac OS. I'm pretty sure that I did accomplish that using Disk Utilities in the Installer program.
I put a OS 10.4 install disk in and tried to boot from it. My problem is I'm getting a screen alert that says, "This software cannot be loaded on this computer." I can either restart (what good is that?) or go to "Startup Disk" where I choose the install disk (or Network Startup) and click on Restart. Then I choose English as the main language and bang! - right back to the wonderful, "This software cannot be loaded on this computer."
View 2 Replies
View Related
Aug 9, 2009
as you can see in the images attached below my MBP is having some video problems. The laptop was purchased about a week ago brand new, and it just started having these issues.
View 5 Replies
View Related
Sep 11, 2009
I had a problem recently where my bezel was falling off and I had problems with keyboard itself. My Applecare more than covered everything and I suspect they may have even given me a refurb Rev. A as a replacement. I am updated to 10.6.1 but everytime the computer restarts I get this weird black screen instead of the standard grey,
View 17 Replies
View Related
Apr 17, 2010
Apple replace my 2007 (June) MBP with the version just prior to this last update (June 2009 model) on April 7. Any chance Apple would swap me with the brand new MBP or am I just S.O.L. I have heard here of people purchasing MBP (because they were fed up with waiting) a week or two before the updates became public and Apple happily swapped them with the newest version
View 7 Replies
View Related
