MacBook Pro :: Replaced Hard Drive In It Still Not Working?
Feb 9, 2012
Last week the hard drive crashed (or so I assumed) on my late 2009 13" Mac-book Pro.I was getting the blinking folder icon at startup. After trying to boot in safe mode and several other start-up options, I booted from an OSX install disk and found that the drive wasn't appearing in the Disk Utility - this, and the fact that I had been running it at very high capacity for far too long is what led me to assume it was utterly dead.So I ordered a new drive, a WD Scorpio Blue 500GB, and installed it today. Again booting from the OSX install disk, I went to the disk utility (thinking I would format the drive before installing the OS), but new drive wasn't there either.Assuming I installed the new drive correctly (it was pretty straightforward), this is leading me to assume that I was wrong with my diagnosis.
06 Macbook Pro. Replaced the Logic Board. Now the CD Drive doesn't work and there's a cd stuck in it! Not under warranty. Outside party replaced the part.
This old unit needed a bigger hard drive, so a friend gave me a Hitachi 60 GB drive he didn't need and I installed it. He told me that it was formatted for MS-DOS and that I would need to reformat it for Mac OS. I'm pretty sure that I did accomplish that using Disk Utilities in the Installer program.
I put a OS 10.4 install disk in and tried to boot from it. My problem is I'm getting a screen alert that says, "This software cannot be loaded on this computer." I can either restart (what good is that?) or go to "Startup Disk" where I choose the install disk (or Network Startup) and click on Restart. Then I choose English as the main language and bang! - right back to the wonderful, "This software cannot be loaded on this computer."
It's running the drive, but nothing happens. Replaced hard drive and laptop will not boot up. I've changed it before so I know I've installed it correctly.
I just replaced my hard drive today. I booted it up and went to disk utilities to format it and all of that. When I finished I went to restore system from back up and plugged in my external hard drive and the computer said there was no history of back up from Time Machine. This was strange because before I formated the hard drive and tried to restore the information, it recognized that there was back up information. I decided I would re-install the os and try again.
About a week ago, my MacBook Pro started freezing and getting the spinning wheel. When this happens, the computer is unresponsive. So, I will turn it off and on reboot, but all I get is the question mark folder. The weird thing is that sometime it will boot right up, but sometimes it wont. Even when it does boot, it only works for about 5 minutes, and then the spinning wheel occurs again. So, I bought a new hard drive, installed it and reinstalled the operating system.
On Sunday night I found my macbook pro ("13, mid 2010, refurbished) in a frozen state a few seconds after waking it from sleep. So I did a forced restart and then my macbook wouldn't boot (blinking question mark folder). I troubleshooted with the OSX Install DVD on my own before taking it to the Genius Bar (disk utility & TDM could not find the hard drive), and we both came to the conclusion that I should install a new drive. So yesterday I bought a new drive, did a fresh OSX install and managed to migrate all of my info from my presumed damaged drive to the new one. Everything went smoothly and the computer was in working order all night. That is until this morning when I shut it down before bringing it to work. On my lunch break I decided to fire up my newly upgraded macbook only to find that it once again would not boot, still with the blinking question mark folder. I also tested to see if I have faulty RAM and it doesn't look like it (unless both sticks are fried).
How do I reinstall Mac OS X after the hard drive has been replaced? I had an authorized Apple repair facility replace the hard drive on my IMac when the original drive died. I have the Mac OS X Install DVD which says "To start up from Mac OS X, hold down the C key as the computer starts up." I've tried that and all I get is a folder icon with a question mark on it. I'm guessing that's because I don't have the the OS installed to start from. How do I get the OS X installed?
Info: iMac, Mac OS X (10.5.6), dead hard drive replaced
After replacing the first one due to a surprisingly noisy hard drive, and the replacement itself being returned due to having a massive hardware failure, I'm still not using the iMac I ordered over a month ago. Funny thing is, the second iMac had the same rumbling hard drive as the first which I was prepared to put up with. With no more than a few days of usage, it just stopped working. It's been over a week since the second was returned and the new one hasn't been shipped!
I upgraded my hard drive from a 500 GB hard drive to a 1TB hard drive in my MacBook Pro, I reinstalled Lion and restored the data from the other hard drive. Now when I try to login to my account, it's as though my password is incorrect. I'm certain it's correct.
How do I use my Apple ID to reset my password? How do I access my account?
Info: MacBook Pro, Mac OS X (10.7.2), Mid 2010 model
I have a 500GB time capsule that quickly ran out of space with my 27" iMac 1TB drive. I wanted to buy a Guardian MAXimus 1.5TB Raid-1 Hard Drive for $360 to do my backups. The cost was high and I decided to look into replacing the Time Capsule drive. I bought a 2TB Western Digital Green internal drive for $130 and replaced it using the Hardmac instructions. The 2TB Green drive runs near silent and is a lot cooler than the original 500GB drive. The swap was easy to do, but I destroyed the rubber mat glued on the bottom. I bought a Rosewill enclosure for $23 for the 500GB drive. I considered buying a FW800 enclosure, but that was $60 and it didn't seem worth it for a back up drive.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
I got my motherboard replaced a few months back and i am now just noticing that my backlit keyboard is no longer working. Is there away for me to connect it as i no longer have warranty.
I am looking into buying a unibody macbook that has a solid state drive from someone. I was wondering if the drive can be replaced with a SATA drive. It has a 128Gig drive in it and just wanted to know if I had to shell out a boatload of cash to upgrade to a larger drive.
I went to the applestore and, after purchasing one to one, was turned down for a data transfer from my old macbook pro to my new macbook pro. The "genius" recommended that I buy an external hard drive from newegg and get some screwdrivers and do it myself. So I did, except (I think) he told me to get the wrong kind of external hard drive enclosure and now I'm just really upset because I went through the process and got the hard drive out of the old macbook pro perfectly. What do I need to (re)buy to make this data transfer work?
I recently purchased this Portable (iomega) 500GB hard drive. I just realized it only works on my Mac's USB ports, but not with my USB Hub. Does it exceed the power limit of the USB Hub? I don't see how it is possible, because I currently have nothing else plugged into it, and it uses a power adapter.
It worked with my old Hard Drive, which is big and uses a power adapter. Now it doesn't seem to work. Also I tried on just a USB adapter that makes the cable longer, still doesn't work. Only the MBP ports work! However, the hub works for things such as phone charger, and speakers right now.
I just upgraded to snow leopard and when I try to plug in my external hard drive I get a prompt saying "the disk inserted was not readable by this computer." It was working before when I was running leopard.
My MacBook Pro is fairly new, but I have a 500g Western Digital external hard drive that was originally hooked up to my previous computer, a PC. When I plugged in my external, I was able to move files from it to my Mac. However, I was unable to delete files off of the external while it was plugged into my Mac and I could not add files, either.
When I booted up my old PC and plugged the external into it, it worked fine. So I can only assume that since I first used it on my PC, I'm having trouble using it on my Mac. A friend of mine told me something about how I'd have to reformat my computer and start over. PLEASE tell me this is not the case. Does anybody know a way to fix this that lets me keep my Mac as is and not have to delete anything?
I have an hitachi external hard drive. It has always worked up until yesterday with no problems. Today it has stopped working with my macbook pro and my works hp laptop, it will still light up and I can hear that it is turned on but it won't appear on the screen. I cannot find any trace of it on my macbook, I've tried the disk utility but it is not there. I tried a friends hp laptop and it is working fine on that.
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have a 1.8 core duo macbook, which previously had a CD-RW drive that stopped reading audio CDs, so I had it replaced under my warranty at John Lewis. It was replaced with a MATSHITA DVD-R UJ-857 and I got it back yesterday, so I was pretty happy that I can now burn DVDs. Only problem is, I just found out that I can't burn CDs with this new drive!
I turned on my early 2008 MBP today and the screen won't come on and no chime but I can hear the startup besides that, I'm assuming it's the gpu so I'm screwed with this computer but I need to transfer the hard drive. How can I do this??
Info: Macbook Pro 2.2ghz, Mac OS X (10.5.1), Nvidia GeForce 8600M GT, iPhone 8gb
Been searching but nothing specifically addressing this issue. I can put in DVD's and music cd's but a blank CD-R is just not recognized. Just had this superdrive replaced 6 weeks ago.
I bought a second hand Mac Book Pro A1150 model. It did not have an optical drive so I bought one, installed it and now my Mac Book will not boot up. When I take the drive out the Mac Book boots up fine. I was told that the optical drive although used was tested and work when it was shipped out. Is it common for a possible defective optical drive to casue a Mac Book pr to not boot up or does this sound like an issue with the optical drive cable, or possibly the logic board?
Wondering if anyone knows what the security policy and process is that is followed by Apple when a damaged hard disk is replaced by Apple. Is the disk destroyed, or demagnetized. How do we know that the data on the disk is will not be accessed and copied anywhere? Is there a stated policy document available somewhere in the Apple Store that discusses this?
I took 2 storage HDs out of my Mac Pro and stuck them in this external HD which I just bought.when I plug it in to my Macbook Pro and turn it on, nothing happens. It all lights up and the harddrives churn for a little bit, but nothing shows up on the desktop or in Disk Utility. What am I doing wrong? I have tried FW400, FW800, and USB2.0. I'm new to external enclosures, so tell me if there is some song and dance routine I need to perform to get it to show up.
Ive read many of these threads and am wondering if there is anything I can do other than erasing everything because I don't have an external hard drive. I used iDefrag but I could only do the "quick" defrag and it wouldn't let me do the compact one. Do I have to buy an external hard drive to be able to partition?
New 13" MBP, 250 MB stock dirve, set it up with software and configured everything, about 200 MB still free. Before I swap it out for a 500 GB and add my media files I thought I'd create an image of it using the Hard Disk tool.
- Logged into home NAS drive on the network using Connect To Server, opened Mac Hard Disk Utility, couldn't create image because the Hard Drive was in use.
- Restarted using OS DVD instead of HD, but now there is no Connect To Server pull-down option to be able to log into NAS drive on network. I can see the NAS through AFP when I go to Save As, but that's only as a guest, Read Only.
- I plugged in my 32 GB flash drive, tried to save image there, got an error message that it can't create because file is too large.
- Unplugged flash drive, plugged in 320 GB external USB drive, couldn't write to it because it was still NTFS from using it with my windows machine.
- Used the HD utility to erase the drive as FAT so it will work on both. Was able to create a folder on the drive so I know it's now writable.
Tried to create the image, it looked like it was working for a while, woke up this morning and checked, it says it can't create the image because the file is too large.
It can't fit 40 GB of data onto an empty 320 GB drive? Did Apple hire Windows programmers to create this utility?
i have a small mac office with a PPC G5 and an intel G5 as my two main boxes. I currently work from a very slow raid network box - no screen, just a networked hard drive really. problem is that it is really slow working live form it. Everything is fine when I copy files to my machine first then work on it.
I can't do this as I'm in the graphics field, and all my links, pics, blah blah are on the server - linking to things like InDesign etc.i need to upgrade in here and add a new machine, but not sure on which way in terms of software for my old G5.The PPC G5 is to become my server (its got to be better than my current network server). As per software tho, because its a non-intel G5, i read that i cannot upgrade to latest software. I'm currently running 10.4.11.
Do I, or, Should I, or for what reasons - would I upgrade to a 'server' software, rather than leave it as its current tiger 10.4.11 software (non software)basically, are there major security, network, etc features of the server OSX over non-server OSX?
My friend is telling me the dvd player stopped because the hard drive is to full. Its a nice imac4,1. It needs to be cleaned out and or restored but what software should we use? Or is there a way to do it for free.
